Bereits geförderte Artikel

Durch den Open-Access-Publikationsfonds geförderte Artikel: tagesaktuelle Daten aus der Unibibliografie

Sortierung nach Jahr und Autor/in

  1. 2023

    1. Abdallah, A., Agag, T., & Schwieger, V. (2023). Method of Development of a New Regional Ionosphere Model (RIM) to Improve Static Single-Frequency Precise Point Positioning (SF-PPP) for Egypt Using Bernese GNSS Software. Remote Sensing, 15(12), Article 12.
    2. Abdelhady, O., Spyridonos, E., & Dahy, H. (2023). Bio-Modules: Mycelium-Based Composites Forming a Modular Interlocking System through a Computational Design towards Sustainable Architecture. Designs, 7(1), Article 1.
    3. Alsaffar, A., Sun, K., & Simon, S. (2023). Multi-material blind beam hardening correction in near real-time based on non-linearity adjustment of projections. Journal of Real-Time Image Processing, 20, 20.
    4. Amann, S., Haist, T., Gatto, A., Kamm, M., & Herkommer, A. (2023). Design and realization of a miniaturized high resolution computed tomography imaging spectrometer. Journal of the European Optical Society, 19(2), Article 2.
    5. Askari Lasaki, B., Maurer, P., & Schönberger, H. (2023). A Fundamental Study on the Extraction of Particulate Organic Carbon from Municipal Wastewater Treatment Plants. Water, 15(10), Article 10.
    6. Attalah, I., Nylund, P., & Brem, A. (2023). Who captures value from hackathons? Innovation contests with collective intelligence tools bridging creativity and coupled open innovation. Creativity and Innovation Management, 32(2), Article 2.
    7. Auch, M., Kuthada, T., Giese, S., & Wagner, A. (2023). Influence of Lithium-Ion-Battery Equivalent Circuit Model Parameter Dependencies and Architectures on the Predicted Heat Generation in Real-Life Drive Cycles. Batteries, 9(5), Article 5.
    8. Bahr, T., & Zinn, B. (2023). Gender Differences in the New Interdisciplinary Subject Informatik, Mathematik, Physik (IMP)-Sticking with STEM? Education Sciences, 13(5), Article 5.
    9. Bardossy, A., & Anwar, F. (2023). Why do our rainfall–runoff models keep underestimating the peak flows? Hydrology and Earth System Sciences, 27(10), Article 10.
    10. Bayer, F., & Leine, R. I. (2023). Sorting-free Hill-based stability analysis of periodic solutions through Koopman analysis. Nonlinear Dynamics, 111, 8439–8466.
    11. Berkmann, F., Steuer, O., Ganss, F., Prucnal, S., Schwarz, D., Fischer, A., & Schulze, J. (2023). Sharp MIR plasmonic modes in gratings made of heavily doped pulsed laser-melted Ge1-xSnx. Optical Materials Express, 13(3), Article 3.
    12. Bett, C., Daiber-Huppert, M., Frenner, K., & Osten, W. (2023). Evaluation of a time-gated-single-pixel-camera as a promising sensor for autonomous vehicles in harsh weather conditions. Journal of the European Optical Society, 19(1), Article 1.
    13. Bieber, S., Auricchio, F., Reali, A., & Bischoff, M. (2023). Artificial instabilities of finite elements for nonlinear elasticity : Analysis and remedies. International Journal for Numerical Methods in Engineering, 124(11), Article 11.
    14. Bienert, F., Graf, T., & Abdou Ahmed, M. (2023). General mathematical model for the period chirp in interference lithography. Optics Express, 31(4), Article 4.
    15. Blagojevic, B., & Sawodny, O. (2023). Path planning for graded concrete element fabrication. Construction Robotics, 7, 125–139.
    16. Blind, M., Kleinert, J., Lutz, T., & Beck, A. (2023). A time-accurate inflow coupling for zonal LES. CEAS Aeronautical Journal, 19.
    17. Bornschlegl, S. M., Krause, P., Kropp, C., & Leistner, P. (2023). Analysis of the Microclimatic and Biodiversity-Enhancing Functions of a Living Wall Prototype for More-than-Human Conviviality in Cities. Buildings, 13(6), Article 6.
    18. Braun, K., Kropp, C., & Boeva, Y. (2023). Constructing platform capitalism: inspecting the political techno-economy of Building Information Modelling. Architectural Research Quarterly, 26(3), Article 3.
    19. Brendecke, E., Tsitlakidis, S., Götze, M., Hagmann, S., & Ates, F. (2023). Quantifying the effects of achilles tendon lengthening surgery : an intraoperative approach. Frontiers in Physiology, 14, 1–9.
    20. Broche, J., Köhler, A. R., Kühnel, F., Osteresch, B., Chandrasekaran, T. T., Adam, S., Brockmeyer, J., & Jeltsch, A. (2023). Genome-wide deposition of 6-methyladenine in human DNA reduces the viability of HEK293 cells and directly influences gene expression. Communications Biology, 6, 138.
    21. Bucklin, O., Di Bari, R., Amtsberg, F., & Menges, A. (2023). Environmental Impact of a Mono-Material Timber Building Envelope with Enhanced Energy Performance. Sustainability, 15(1), Article 1.
    22. Bárdossy, A. (2023). Changing correlations: a flexible definition of non-Gaussian multivariate dependence. Stochastic Environmental Research and Risk Assessment, 37, 2619–2629.
    23. Celik, A., Willems, F., Tüzün, M., Marinova, S., Heyn, J., Fiedler, M., & Bonten, C. (2023). Compounding, Rheology and Numerical Simulation of Highly Filled Graphite Compounds for Potential Fuel Cell Applications. Polymers, 15(12), Article 12.
    24. Chavli, E., & Pfeiffer, G. (2023). Centers of Hecke algebras of complex reflection groups. Beiträge Zur Algebra Und Geometrie, 18.
    25. Class, H., Keim, L., Schirmer, L., Strauch, B., Wendel, K., & Zimmer, M. (2023). Seasonal Dynamics of Gaseous CO2 Concentrations in a Karst Cave Correspond with Aqueous Concentrations in a Stagnant Water Column. Geosciences, 13(2), Article 2.
    26. Davidová, M., Barath, S., & Dickinson, S. (2023). Cultural environments with more-than-human perspectives : Prototyping through research and training. Agathón, 13, 165–178.
    27. de Jong, D., Karst, J., Ludescher, D., Flöß, M., Möll, S., Dirnberger, K., Hentschel, M., Ludwigs, S., Braun, P. V., & Gießen, H. (2023). Electrically switchable metallic polymer metasurface device with gel polymer electrolyte. Nanophotonics, 12(8), Article 8.
    28. Deng, X.-L. (2023). Evaluation of gravitational curvatures for a tesseroid and spherical shell with arbitrary-order polynomial density. Journal of Geodesy, 97, 18.
    29. Deng, X.-L. (2023). Corrections to: “Accurate computation of gravitational field of a tesseroid” by Fukushima (2018) in J. Geod. 92(12):1371–1386. Journal of Geodesy, 97, 8.
    30. Deng, X.-L., & Sneeuw, N. (2023). Analytical Solutions for Gravitational Potential up to Its Third-order Derivatives of a Tesseroid, Spherical Zonal Band, and Spherical Shell. Surveys in Geophysics, 44, 1125–1173.
    31. Dinkelacker, J., Kaiser, D., Panzeri, M., Parmentier, P., Neumaier, M., Tonhäuser, C., & Rudolph, S. (2023). System integration based on packing, piping and harness routing automation using graph-based design languages. CEAS Aeronautical Journal, 14, 591–606.
    32. Dufner, L., Oßwald, B., Eberspaecher, J., Riedel, B., Kling, C., Kern, F., & Seidenstuecker, M. (2023). Adjustment of Micro- and Macroporosity of ß-TCP Scaffolds Using Solid-Stabilized Foams as Bone Replacement. Bioengineering, 10(2), Article 2.
    33. Dufner, L., Ott, F., Otto, N., Lembcke, T., & Kern, F. (2023). Immobilization of TiO2 Photocatalysts for Water Treatment in Geopolymer Based Coatings. Catalysts, 13(5), Article 5.
    34. Ertel, B., Meer, J. V. der, & Seifert, U. (2023). Waiting Time Distributions in Hybrid Models of Motor–Bead Assays : A Concept and Tool for Inference. International Journal of Molecular Sciences, 24(8), Article 8.
    35. Eugster, S. R., & Harsch, J. (2023). A family of total Lagrangian Petrov–Galerkin Cosserat rod finite element formulations. GAMM-Mitteilungen, 46(2), Article 2.
    36. Fahse, N., Millard, M., Kempter, F., Maier, S., Roller, M., & Fehr, J. C. (2023). Dynamic human body models in vehicle safety : an overview. GAMM-Mitteilungen, 46(2), Article 2.
    37. Falter, J., Binz, H., & Kreimeyer, M. (2023). Investigations on design limits and improved material utilization of press-fit connections using elastic-plastic design. Applications in Engineering Science, 13(March), Article March.
    38. Fay, L., Cobos, E., Yang, B., Gatidis, S., & Küstner, T. (2023). Avoiding Shortcut-Learning by Mutual Information Minimization in Deep Learning-Based Image Processing. IEEE Access, 11, 64070–64086.
    39. Fischer, F., Frenner, K., Granai, M., Fend, F., & Herkommer, A. (2023). Data-driven development of sparse multi-spectral sensors for urological tissue differentiation. Journal of the European Optical Society, 19(1), Article 1.
    40. Flöß, M., Steinle, T., Werner, F., Wang, Y., Wagner, W. L., Steinle, V., Liu, B. S., Zheng, Y., Chen, Z., Ackermann, M., Mentzer, S. J., & Gießen, H. (2023). 3D stimulated Raman spectral imaging of water dynamics associated with pectin-glycocalyceal entanglement. Biomedical Optics Express, 14(4), Article 4.
    41. Frasquet, C. P., Stoll, D., Kuthada, T., & Wagner, A. (2023). Experimental and Numerical Investigation of the Aerodynamic Ventilation Drag of Heavy-Duty Vehicle Wheels. Fluids, 8(2), Article 2.
    42. Frie, L., & Eberhard, P. (2023). On shift selection for Krylov subspace based model order reduction : an iterative greedy approach combined with singular value decomposition. Multibody System Dynamics, 1–21.
    43. Gehringer, D., Kuthada, T., & Wagner, A. (2023). Thermal Management System of the UNICARagil Vehicles : A Comprehensive Overview. World Electric Vehicle Journal, 14(1), Article 1.
    44. Geiger, C., & Riedelbach, S. (2023). Power Plant Transients including Hydraulic Short Circuit Operation Mode. Energies, 16(11), Article 11.
    45. Geß, A., & Kalonya, D. H. (2023). Sustainable Husbandry? : A Comparative LCA of Three Lamb Breeding Systems in Turkey. Circular Economy and Sustainability, 23.
    46. Ghazal, I., Mansour, R., & Davidova, M. (2023). AGRI|gen: Analysis and Design of a Parametric Modular System for Vertical Urban Agriculture. Sustainability, 15(6), Article 6.
    47. Giess, T., Itzigehl, S., Range, J., Schömig, R., Bruckner, J. R., & Pleiss, J. (2023). FAIR and scalable management of small-angle X-ray scattering data. Journal of Applied Crystallography, 56(2), Article 2.
    48. Gratz, S., & Zvonareva, A. (2023). Lattices of t-structures and thick subcategories for discrete cluster categories. Journal of the London Mathematical Society, 107(3), Article 3.
    49. Gräfe, M., Pettas, V., Gottschall, J., & Cheng, P. W. (2023). Quantification and correction of motion influence for nacelle-based lidar systems on floating wind turbines. Wind Energy Science, 8(6), Article 6.
    50. Gröger, A., Pedrini, G., Claus, D., Alekseenko, I., Gloeckler, F., & Reichelt, S. (2023). Advantages of holographic imaging through fog. Applied Optics, 62(10), Article 10.
    51. Gröger, A., Pedrini, G., Fischer, F., Claus, D., Aleksenko, I., & Reichelt, S. (2023). Two-wavelength digital holography through fog. Journal of the European Optical Society, 19(1), Article 1.
    52. Guenat, S., Bailey-Athias, J. P., & Fischer, L. K. (2023). Urban foraging in Brazilian public greenspaces. Ambio, 52, 1248–1261.
    53. Guttá, C., Morhard, C., & Rehm, M. (2023). Applying a GAN-based classifier to improve transcriptome-based prognostication in breast cancer. PLoS Computational Biology, 19(4), Article 4.
    54. Gödeke, J., & Rigaud, G. (2023). Imaging based on Compton scattering : model uncertainty and data-driven reconstruction methods. Inverse Problems, 39, 034004.
    55. Hahn, L., Matter, F., & Eberhard, P. (2023). Transient optical simulation by coupling elastic multibody systems, finite elements, and ray tracing. Journal of the European Optical Society, 19(1), Article 1.
    56. Hans, A. C., Becker, P. M., Haußmann, J., Suhr, S., Wanner, D. M., Lederer, V., Willig, F., Frey, W., Sarkar, B., Kästner, J., & Peters, R. (2023). A Practical and Robust Zwitterionic Cooperative Lewis Acid/Acetate/Benzimidazolium Catalyst for Direct 1,4-Additions. Angewandte Chemie, 62(13), Article 13.
    57. Harsch, J., Sailer, S., & Eugster, S. R. (2023). A total Lagrangian, objective and intrinsically locking-free Petrov–Galerkin SE(3) Cosserat rod finite element formulation. International Journal for Numerical Methods in Engineering, 124(13), Article 13.
    58. Hartlieb, E., Ziegler, P., & Eberhard, P. (2023). Vibration analysis on newly designed painting supports for the Cranach exhibition 2022 at Herzogin Anna Amalia Bibliothek. In M. Kaliske (Hrsg.), 92nd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Bde. 22, 1, S. e202200324). Wiley.
    59. Hartlieb, S., Schober, C., Haist, T., & Reichelt, S. (2023). Field evaluation of a novel holographic single-image depth reconstruction sensor. Journal of the European Optical Society, 19(1), Article 1.
    60. Harzenetter, L., Breitenbücher, U., Binz, T., & Leymann, F. (2023). An Integrated Management System for Composed Applications Deployed by Different Deployment Automation Technologies. SN Computer Science, 4, 370.
    61. Hay, J., Schories, L., Bayerschen, E., Wimmer, P., Zehbe, O., Kirschbichler, S., & Fehr, J. C. (2023). Application of data-driven surrogate models for active human model response prediction and restraint system optimization. Frontiers in Applied Mathematics and Statistics, 9, 1–16.
    62. Helber, F., Carosella, S., & Middendorf, P. (2023). Effects of reactive and non-reactive tackifying agents on mechanical neat resin and composite performance for preforming processes and Liquid Resin Infusion (LRI) techniques. Advanced Manufacturing : Polymer & Composites Science, 9(1), Article 1.
    63. Hentschel, M., Koshelev, K., Sterl, F., Both, S., Karst, J., Shamsafar, L., Weiss, T., Kivshar, Y., & Gießen, H. (2023). Dielectric Mie voids: confining light in air. Light : Science & Applications, 12, 3.
    64. Herberichs, C., & Viehhauser, G. (2023). Varianz vermitteln : zur editorischen Aufarbeitung abweichender Textfassungen in Redaktionen von Der Heiligen Leben. Editio, 36(1), Article 1.
    65. Heudorfer, K., Bauer, J. V., Caydamli, Y., Gompf, B., Take, J., Bauchmeiser, M. R., & Middendorf, P. (2023). Method of Manufacturing Structural, Optically Transparent Glass Fiber-Reinforced Polymers (tGFRP) Using Infusion Techniques with Epoxy Resin Systems and E-Glass Fabrics. Polymers, 15(9), Article 9.
    66. Hillebrand, M., Müller, J., Ullah, J., & Lutz, T. (2023). Investigation of a Realistic Flap Modeling Using a Combination of Chimera Method and Grid Deformation on a Wing Fuselage Configuration. In M. Kaliske (Hrsg.), 92nd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Bde. 22, 1, S. e202200101). Wiley.
    67. Hirsch, V., Reimann, P., Treder-Tschechlov, D., Schwarz, H., & Mitschang, B. (2023). Exploiting domain knowledge to address class imbalance and a heterogeneous feature space in multi-class classification. The VLDB Journal, 28.
    68. Horn, T., Gosliga, A., Li, C., Enculescu, M., & Legewie, S. G. (2023). Position-dependent effects of RNA-binding proteins in the context of co-transcriptional splicing. Npj Systems Biology and Applications, 9, 1.
    69. Horter, T., Rühl, H., Yang, W., Chiang, Y.-S., Glaeser, K., & Zimmermann, A. (2023). Image Analysis Based Evaluation of Print Quality for Inkjet Printed Structures. Journal of Manufacturing and Materials Processing, 7(1), Article 1.
    70. Houba, N., Delchambre, S., Hechenblaikner, G., Ziegler, T., & Fichter, W. (2023). Time-delay interferometry infinity for tilt-to-length noise estimation in LISA. Classical and Quantum Gravity, 40(10), Article 10.
    71. Hufert, J., Grebhardt, A., Schneider, Y., Bonten, C., & Schmauder, S. (2023). Deformation Behavior of 3D Printed Auxetic Structures of Thermoplastic Polymers : PLA, PBAT, and Blends. Polymers, 15(2), Article 2.
    72. Härer, F., & Herzwurm, G. (2023). Entwicklung und Evaluation einer gamifizierten Design Thinking Methode für die frühe Phase des Innovationsmanagements. HMD : Praxis Der Wirtschaftsinformatik, 60, 721–737.
    73. Höpfl, S., Pleiss, J., & Radde, N. E. (2023). Bayesian estimation reveals that reproducible models in Systems Biology get more citations. Scientific Reports, 13, 2695.
    74. Jagfeld, S. M. P., Birke, K. P., Fill, A., & Keil, P. (2023). How Cell Design Affects the Aging Behavior : Comparing Electrode-Individual Aging Processes of High-Energy and High-Power Lithium-Ion Batteries Using High Precision Coulometry. Batteries, 9(4), Article 4.
    75. Jung, J. H., Srinivasan, P., Forslund, A., & Grabowski, B. T. (2023). High-accuracy thermodynamic properties to the melting point from ab initio calculations aided by machine-learning potentials. Npj Computational Materials, 9, 3.
    76. Kalu-Uka, A., Ozoegwu, C., & Eberhard, P. (2023). 3D FEM Simulation of Titanium Alloy (Ti6Al4V) Machining with Harmonic Endmill Tools. In M. Kaliske (Hrsg.), 92nd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Bde. 22, 1, S. e202200111). Wiley.
    77. Kappler, J., Klostermann, S., Lange, P. L., Dyballa, M., Veith, L., Schleid, T., Weil, T., Kästner, J., & Buchmeiser, M. (2023). Sulfur-Composites Derived from Poly(acrylonitrile) and Poly(vinylacetylene) : A Comparative Study on the Role of Pyridinic and Thioamidic Nitrogen. Batteries & Supercaps, 6(3), Article 3.
    78. Karsch, M., Van den Eynde, J., & Steelant, J. (2023). Linearly combined transition model based on empirical spot growth correlations. CEAS Space Journal, 1–12.
    79. Kaufmann, S., Rößner, P., Renninger, S., Lambarth, M., Raab, M., Stein, J. S., Seithümmer, V., & Birke, K. P. (2023). Techno-Economic Potential of Plasma-Based CO2 Splitting in Power-to-Liquid Plants. Applied Sciences, 13(8), Article 8.
    80. Khella, M. S., Schnee, P., Weirich, S., Bui, T., Bröhm, A., Bashtrykov, P., Pleiss, J., & Jeltsch, A. (2023). The T1150A cancer mutant of the protein lysine dimethyltransferase NSD2 can introduce H3K36 trimethylation. The Journal of Biological Chemistry, 299(6), Article 6.
    81. Kiemle, S., Heck, K., Coltman, E., & Helmig, R. (2023). Stable Water Isotopologue Fractionation During Soil-Water Evaporation : Analysis Using a Coupled Soil-Atmosphere Model. Water Resources Research, 59(2), Article 2.
    82. Kleinert, J., Stober, J., & Lutz, T. (2023). Numerical simulation of wake interactions on a tandem wing configuration in high-speed stall conditions. CEAS Aeronautical Journal, 14, 171–186.
    83. Kohlhaas, R., Kröker, I., Oladyshkin, S., & Nowak, W. (2023). Gaussian active learning on multi-resolution arbitrary polynomial chaos emulator: concept for bias correction, assessment of surrogate reliability and its application to the carbon dioxide benchmark. Computational Geosciences, 27, 369–389.
    84. Krach, D., & Steeb, H. (2023). Comparing methods for permeability computation of porous materials and their limitations. In M. Kaliske (Hrsg.), 92nd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (23, 1; Nummern 23, 1, S. e202200225). Wiley-VCH.
    85. Kumar, S., Chatterjee, S., Dabhi, C. K., Singh Chauhan, Y., & Amrouch, H. (2023). Nontraditional Design of Dynamic Logics Using FDSOI for Ultra-Efficient Computing. IEEE Journal on Exploratory Solid-State Computational Devices and Circuits, 9(1), Article 1.
    86. Käß, M., Werz, M., & Weihe, S. (2023). Residual Stress Formation Mechanisms in Laser Powder Bed Fusion : a Numerical Evaluation. Materials, 16(6), Article 6.
    87. Lakhani, H., & Hofmann, J. (2023). Concrete cone failure of post installed fasteners during fire. Ce/Papers, 6(1), Article 1.
    88. Lee, Y., Karst, J., Ubl, M., Hentschel, M., & Gießen, H. (2023). Dynamic beam control based on electrically switchable nanogratings from conducting polymers. Nanophotonics, 1–7.
    89. Li, Y., Bauer, M., Kelz, S., Strack, H., Simolka, J., Mazur, C., Sommer, M. M., Mocker, A., & Srama, R. (2023). Upgrades of a Small Electrostatic Dust Accelerator at the University of Stuttgart. Applied Sciences, 13(7), Article 7.
    90. Lienstromberg, C., Schiffer, S., & Schubert, R. (2023). A Data-Driven Approach to Viscous Fluid Mechanics: The Stationary Case. Archive for Rational Mechanics and Analysis, 247, 30.
    91. Lind, J., Hagenlocher, C., Weckenmann, N., Blazquez-Sanchez, D., Weber, R., & Graf, T. (2023). Adjustment of the geometries of the cutting front and the kerf by means of beam shaping to maximize the speed of laser cutting. The International Journal of Advanced Manufacturing Technology, 126, 1527–1538.
    92. Liu, J., Atmaca, Ö., & Pott, P. (2023). Needle-Based Electrical Impedance Imaging Technology for Needle Navigation. Bioengineering, 10(5), Article 5.
    93. Lorenz, M., Seitfudem, G., Randazzo, S., Gueccia, R., Gehring, F., & Prenzel, T. M. (2023). Combining Membrane and Zero Brine Technologies in Waste Acid Treatment for a Circular Economy in the Hot-Dip Galvanizing Industry : A Life Cycle Perspective. Journal of Sustainable Metallurgy, 9, 537–549.
    94. Ma, H., Gaisser, L., & Riedelbach, S. (2023). Monitoring Pumping Units by Convolutional Neural Networks for Operating Point Estimations. Energies, 16(11), Article 11.
    95. Madadi Varzaneh, H. R., & Steeb, H. (2023). The high cycle fatigue testing of High-Performance Concretes using high frequency excitation. In M. Kaliske (Hrsg.), 92nd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Bde. 22, 1, S. e202200221). Wiley.
    96. Maier, L., Kufferath-Sieberin, L., Pauly, L., Hopp-Hirschler, M., Gresser, G., & Nieken, U. (2023). Constitutive Correlations for Mass Transport in Fibrous Media Based on Asymptotic Homogenization. Materials, 16(5), Article 5.
    97. Maier, S., & Fehr, J. C. (2023). Efficient simulation strategy to design a safer motorcycle. Multibody System Dynamics, 1–28.
    98. Markthaler, D., & Ghosh, R. (2023). Computational prediction of extracellular loops of the Por39 outer membrane porin of Rhodospirillum rubrum suitable for epitope surface display. Computational and Structural Biotechnology Journal, 21, 2483–2494.
    99. Mast, Y., & Takors, R. (2023). Transferring Bubble Breakage Models Tailored for Euler-Euler Approaches to Euler-Lagrange Simulations. Processes, 11(4), Article 4.
    100. Matheou, M., Phocas, M. C., Christoforou, E. G., & Müller, A. (2023). New perspectives in architecture through transformable structures : A simulation study. Frontiers in Built Environment, 9, 1–10.
    101. Matter, F., Iroz, I., & Eberhard, P. (2023). Methods of Model Order Reduction for Coupled Systems Applied to a Brake Disc-Wheel Composite. In M. Kaliske (Hrsg.), 92nd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Bde. 22, 1, S. e202200323). Wiley.
    102. Matter, F., Iroz, I., & Eberhard, P. (2023). Interpolation-based parametric model order reduction of automotive brake systems for frequency-domain analyses. GAMM-Mitteilungen, 46(1), Article 1.
    103. Matthies, J. H., Schall, T., Pritzkow, W., Tuttlies, U., & Nieken, U. (2023). Electrically Heated Oxide Ceramic Tubes for High Temperature Reactions. Chemie - Ingenieur - Technik, 95(5), Article 5.
    104. Meszaros-Beller, L., Hammer, M., Riede, J., Pivonka, P., Little, J. P., & Schmitt, S. (2023). Effects of geometric individualisation of a human spine model on load sharing : neuro-musculoskeletal simulation reveals significant differences in ligament and muscle contribution. Biomechanics and Modeling in Mechanobiology, 22, 669–694.
    105. Meszaros-Beller, L., Hammer, M., Schmitt, S., & Pivonka, P. (2023). Effect of neglecting passive spinal structures: a quantitative investigation using the forward-dynamics and inverse-dynamics musculoskeletal approach. Frontiers in Physiology, 14, 1–11.
    106. Minden, S., Aniolek, M., Noorman, H., & Takors, R. (2023). Mimicked Mixing-Induced Heterogeneities of Industrial Bioreactors Stimulate Long-Lasting Adaption Programs in Ethanol-Producing Yeasts. Genes, 14(5), Article 5.
    107. Mouris, K., Espinoza, E. A., Schwindt, S., Mohammadi, F., Haun, S., Wieprecht, S., & Oladyshkin, S. (2023). Stability criteria for Bayesian calibration of reservoir sedimentation models. Modeling Earth Systems and Environment, 9, 3643–3661.
    108. Müller, S., Maier, D., & Parspour, N. (2023). Inductive Electrically Excited Synchronous Machine for Electrical Vehicles : Design, Optimization and Measurement. Energies, 16(4), Article 4.
    109. Najafi-Haghi, Z. P., & Wunderlich, H.-J. (2023). Identifying Resistive Open Defects in Embedded Cells under Variations. Journal of Electronic Testing, 39, 27–40.
    110. Nikolaev, D. (2023). Bootstrap co-occurrence networks of consonants and the Basic Consonant Inventory. Linguistic Typology, 27(2), Article 2.
    111. Noeren, J., Parspour, N., & Elbracht, L. (2023). An Easily Scalable Dynamic Wireless Power Transfer System for Electric Vehicles. Energies, 16(9), Article 9.
    112. Petrasch, M. C., & Hofmann, J. (2023). Strengthening of anchor channels on the concrete surface. Ce/Papers, 6(1), Article 1.
    113. Pflüger, H., Viehhauser, G., & Tumanov, R. (2023). An interface to view collections of visual art. International Journal of Digital Humanities, 1–28.
    114. Pittiglio, A., Simpson, A., Costalonga Martins, V., & Dahy, H. (2023). Fibrx Rocking Chair: Design and Application of Tailored Timber as an Embedded Frame for Natural Fibre-Reinforced Polymer (NFRP) Coreless Winding. Polymers, 15(3), Article 3.
    115. Reichle, P., Reichardt, G., Henn, M., Umlauf, G., Barz, J., Riedmüller, K., Liewald, M., & Tovar, G. (2023). Volatile Lubricants Injected Through Laser Drilled Micro Holes Enable Efficiently Hydrocarbon-Free Lubrication for Deep Drawing Processes. International Journal of Precision Engineering and Manufacturing-Green Technology, 10, 875–890.
    116. Rettberg, J., Wittwar, D., Buchfink, P., Brauchler, A., Ziegler, P., Fehr, J. C., & Haasdonk, B. (2023). Port-Hamiltonian fluid–structure interaction modelling and structure-preserving model order reduction of a classical guitar. Mathematical and Computer Modelling of Dynamical Systems, 29(1), Article 1.
    117. Römer, T., Schulz, K., Wu, Y., Wenzel, C., & Rist, U. (2023). Delay of laminar-turbulent transition by counter-rotating cylindrical roughness elements in a laminar flat plate boundary layer. Experiments in Fluids, 64, 42.
    118. Schauffler, N. (2023). Alternation preferences affect focus marking in German and English differently. Frontiers in Psychology, 14, 1–19.
    119. Schellander, Y., Winter, M., Schamber, M., Munkes, F., Schalberger, P., Kübler, H., Pfau, T., & Frühauf, N. (2023). Ultraviolet photodetectors and readout based on a-IGZO semiconductor technology. Journal of the Society for Information Display, 31(5), Article 5.
    120. Schelle, J. T., Lepoittevin, W., & Hauer, B. (2023). Enhanced Semi-Preparative Biotransformation of Cumene Dioxygenase: From Analytical Scale to Product Isolation. Chemie - Ingenieur - Technik, 95(4), Article 4.
    121. Schmid, R., & Xiong, X. (2023). China’s environmental solutions. Applied Microbiology and Biotechnology, 107, 987–1002.
    122. Schnee, P., Weirich, S., & Jeltsch, A. (2023). Charakterisierung der Substratspezifität von Protein-Methyltransferasen. Biospektrum, 29, 249–251.
    123. Schneider, A., Curado, C., Lystbaek, T. B., Osuna, S., & Hauer, B. (2023). Verwendung der Struktur und Dynamik der Squalen-Hopen-Zyklase für die (−)-Ambroxid Produktion. Angewandte Chemie, 135(22), Article 22.
    124. Schneider, A., Curado, C., Lystbaek, T. B., Osuna, S., & Hauer, B. (2023). Harnessing the Structure and Dynamics of the Squalene-Hopene Cyclase for (-)-Ambroxide Production. Angewandte Chemie, 62(22), Article 22.
    125. Schneider, Y., Guski, V., Schmauder, S., Kadkhodapour, J., Hufert, J., Grebhardt, A., & Bonten, C. (2023). Deformation Behavior Investigation of Auxetic Structure Made of Poly(butylene adipate-co-terephthalate) Biopolymers Using Finite Element Method. Polymers, 15(7), Article 7.
    126. Schnell, P., Haag, P., & Jünger, H. C. (2023). Implementation of Digital Technologies in Construction Companies : Establishing a Holistic Process which Addresses Current Barriers. Businesses, 3(1), Article 1.
    127. Schopf, T., Weihe, S., Daniel, T., Smaga, M., & Beck, T. (2023). Fatigue behavior and lifetime assessment of an austenitic stainless steel in the VHCF regime at ambient and elevated temperatures. Fatigue & Fracture of Engineering Materials & Structures, 46(5), Article 5.
    128. Schuff, H., Vanderlyn, L., Adel, H., & Vu, N. T. (2023). How to do human evaluation : A brief introduction to user studies in NLP. Natural Language Engineering, 1–24.
    129. Schwarz, A., Keim, J., Chiocchetti, S., & Beck, A. (2023). A Reinforcement Learning Based Slope Limiter for Second-Order Finite Volume Schemes. In M. Kaliske (Hrsg.), 92nd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (23, 1; Nummern 23, 1, S. e202200207). Wiley-VCH.
    130. Schwindt, S., Medrano, S. C., Mouris, K., Beckers, F., Haun, S., Nowak, W., Wieprecht, S., & Oladyshkin, S. (2023). Bayesian Calibration Points to Misconceptions in Three-Dimensional Hydrodynamic Reservoir Modeling. Water Resources Research, 59(3), Article 3.
    131. Schäfer, M. C., Petter, M., Hartenbach, I., Locke, R., Zhang, S., Wickleder, C., & Schleid, T. (2023). Luminescence Properties of Y3FSi3O10:Ln3+ (Ln = Eu, Tb, Er) with Thalenite-Type Host Lattice and Crystal Structure of Tm3FSi3O10. Crystals, 13(3), Article 3.
    132. Schönherr, M., Rühl, H., Günther, T., Zimmermann, A., & Gundelsweiler, B. (2023). Adhesion-Induced Demolding Forces of Hard Coated Microstructures Measured with a Novel Injection Molding Tool. Polymers, 15(5), Article 5.
    133. Seyedpour, S. M., Henning, C., Kirmizakis, P., Herbrandt, S., Ickstadt, K., Doherty, R., & Ricken, T. (2023). Uncertainty with Varying Subsurface Permeabilities Reduced Using Coupled Random Field and Extended Theory of Porous Media Contaminant Transport Models. Water, 15(1), Article 1.
    134. Seyedpour, S. M., Thom, A., & Takors, R. (2023). Simulation of Contaminant Transport through the Vadose Zone: A Continuum Mechanical Approach within the Framework of the Extended Theory of Porous Media (eTPM). Water, 15(2), Article 2.
    135. Sharba, S., Herb, J., & Fritzen, F. (2023). Reduced order homogenization of thermoelastic materials with strong temperature dependence and comparison to a machine-learned model. Archive of Applied Mechanics, 93, 2855–2876.
    136. Somers, P., Holdenried-Krafft, S., Zahn, J., Schüle, J., Veil, C., Harland, N., Walz, S., Stenzl, A., Sawodny, O., Tarin Sauer, C., & Lensch, H. P. A. (2023). Cystoscopic depth estimation using gated adversarial domain adaptation. Biomedical Engineering Letters, 13, 141–151.
    137. Stein, F., Nößler, M., Hazari, A. S., Böser, L., Walter, R., Liu, H., Klemm, E., & Sarkar, B. (2023). Ruthenium Complexes of Polyfluorocarbon Substituted Terpyridine and Mesoionic Carbene Ligands: An Interplay in CO2 Reduction. Chemistry - a European Journal, 29(31), Article 31.
    138. Stein, F., Suhr, S., Hazari, A. S., Walter, R., Nößler, M., & Sarkar, B. (2023). Azide-Substituted 1,2,3-Triazolium Salts as Useful Synthetic Synthons: Access to Triazenyl Radicals and Staudinger Type Reactivity. Chemistry - a European Journal, 29(34), Article 34.
    139. Stempniewski, L., & Kuhlmann, U. (2023). Composite bridges with cracked concrete deck spanning between transverse beams under fatigue shear loading. Ce/Papers, 6(1), Article 1.
    140. Strohbeck, P., Eggenweiler, E., & Rybak, I. (2023). A Modification of the Beavers-Joseph Condition for Arbitrary Flows to the Fluid-porous Interface. Transport in Porous Media, 147, 605–628.
    141. Ströbel, M., Kiefer, L., Pross-Brakhage, J., Hemmerling, J., Finster, P., Ziebert, C., & Birke, K. P. (2023). High Flashpoint and Eco-Friendly Electrolyte Solvent for Lithium-Ion Batteries. Batteries, 9(7), Article 7.
    142. Suditsch, M., Ricken, T., & Wagner, A. (2023). Patient-specific simulation of brain tumour growth and regression. In M. Kaliske (Hrsg.), 92nd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (23, 1; Nummern 23, 1, S. e202200213). Wiley-VCH.
    143. Tahir, M., & Tenbohlen, S. (2023). Transformer Winding Fault Classification and Condition Assessment Based on Random Forest Using FRA. Energies, 16(9), Article 9.
    144. Tesi, L., Stemmler, F., Winkler, M., Liu, S. S. Y., Das, S., Sun, X., Zharnikov, M., Ludwigs, S., & van Slageren, J. (2023). Modular Approach to Creating Functionalized Surface Arrays of Molecular Qubits. Advanced Materials, 35(10), Article 10.
    145. Thomas, B., Roger, J., Gunnell, Y., & Ashraf, S. (2023). A method for evaluating population and infrastructure exposed to natural hazards: tests and results for two recent Tonga tsunamis. Geoenvironmental Disasters, 10, 4.
    146. Tomalka, A. (2023). Eccentric muscle contractions : from single muscle fibre to whole muscle mechanics. Pflügers Archiv, 475, 421–435.
    147. Tovey, S. J., Zills, F., Torres-Herrador, F., Lohrmann, C., Brückner, M., & Holm, C. (2023). MDSuite: comprehensive post-processing tool for particle simulations. Journal of Cheminformatics, 15, 19.
    148. Trivedi, Z. M., Gehweiler, D., Wychowaniec, J. K., Ricken, T., Gueorguiev, B., Wagner, A., & Röhrle, O. (2023). A continuum mechanical porous media model for vertebroplasty : Numerical simulations and experimental validation. Biomechanics and Modeling in Mechanobiology, 22, 1253–1266.
    149. Trivedi, Z. M., Gehweiler, D., Wychowaniec, J. K., Ricken, T., Gueorguiev-Rüegg, B., Wagner, A., & Röhrle, O. (2023). Analysing the bone cement flow in the injection apparatus during vertebroplasty. In M. Kaliske (Hrsg.), 92nd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (23, 1; Nummern 23, 1, S. e202200295). Wiley-VCH.
    150. Trüdinger, E.-M., & Ziller, C. (2023). Setting limits to tolerance : an experimental investigation of individual reactions to extremism and violence. Frontiers in Political Science, 5, 1–11.
    151. Tschöpe, M., & Rauhut, G. (2023). Spectroscopic Characterization of Diazophosphane : A Candidate for Astrophysical Observations. The Astrophysical Journal, 949(1), Article 1.
    152. Töpler, J., Buchholz, L., Lukas, J., & Kuhlmann, U. (2023). Guidelines for a Finite Element Based Design of Timber Structures and Their Exemplary Application on Modelling of Beech LVL. Buildings, 13(2), Article 2.
    153. Ulmer, A., Veit, S., Erdemann, F., Freund, A., Lösch, M., Teleki, A., Zeidan, A. A., & Takors, R. (2023). A Two-Compartment Fermentation System to Quantify Strain-Specific Interactions in Microbial Co-Cultures. Bioengineering, 10(1), Article 1.
    154. Veyskarami, M., Michaelkowski, C., Bringedal, C., & Helmig, R. (2023). Droplet Formation, Growth and Detachment at the Interface of a Coupled Free-FLow-Porous Medium System : A New Model Development and Comparison. Transport in Porous Media, 149, 389–419.
    155. Vogl, S. (2023). Mixed Methods Longitudinal Research. Forum Qualitative Sozialforschung, 24(1), Article 1.
    156. Voigt, M., Roth, D., & Kreimeyer, M. (2023). Decision Support for Defining Adaptive Façade Design Goals in the Early Design Phase. Energies, 16(8), Article 8.
    157. Voss, C., Petzold, F., & Rudolph, S. (2023). Graph transformation in engineering design : an overview of the last decade. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 37, 1–17.
    158. Völter, J.-S., Ricken, T., & Röhrle, O. (2023). About the applicability of the theory of porous media for the modelling of non-isothermal material injection into porous structures. In M. Kaliske (Hrsg.), 92nd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (23, 1; Nummern 23, 1, S. e202200070). Wiley-VCH.
    159. Wagner, A., Sonntag, A., Reuschen, S., Nowak, W., & Ehlers, W. (2023). Hydraulically induced fracturing in heterogeneous porous media using a TPM-phase-field model and geostatistics. In M. Kaliske (Hrsg.), 92nd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (23, 1; Nummern 23, 1, S. e202200118). Wiley-VCH.
    160. Wagner, S., Treptow, K., Weser, S., Drexler, M., Sahakalkan, S., Eberhardt, W., Günther, T., Pruß, C., Herkommer, A., & Zimmermann, A. (2023). Injection Molding of Encapsulated Diffractive Optical Elements. Micromachines, 14(6), Article 6.
    161. Waldmann, A., Ehrle, M. C., Kleinert, J., Yorita, D., & Lutz, T. (2023). Mach and Reynolds number effects on transonic buffet on the XRF-1 transport aircraft wing at flight Reynolds number. Experiments in Fluids, 64, 102.
    162. Walter, T., Stutzig, N., & Siebert, T. (2023). Active exoskeleton reduces erector spinae muscle activity during lifting. Frontiers in Bioengineering and Biotechnology, 11, 1–12.
    163. Walz, D., Göbel, R., Werz, M., & Weihe, S. (2023). Effect of Weld Length on Strength, Fatigue Behaviour and Microstructure of Intersecting Stitch-Friction Stir Welded AA 6016-T4 Sheets. Materials, 16(2), Article 2.
    164. Weder, B., Barzen, J., Beisel, M., & Leymann, F. (2023). Provenance-Preserving Analysis and Rewrite of Quantum Workflows for Hybrid Quantum Algorithms. SN Computer Science, 4, 233.
    165. Weißhaupt, D., Funk, H. S., Oehme, M., Bloos, D., Berkmann, F., Seidel, L., Fischer, I. A., & Schulze, J. (2023). High mobility Ge 2DHG based MODFETs for low-temperature applications. Semiconductor Science and Technology, 38(3), Article 3.
    166. Welzel, S., Burmeister, J., Höppchen, O., & Nieken, U. (2023). Validation of an Extended Kinetic Model of Free-Radical N-Vinylpyrrolidone Polymerization. Macromolecular Reaction Engineering, 17(2), Article 2.
    167. Welzel, S., Zander, C., & Nieken, U. (2023). Wall Layer Formation in Continuously Operated Tubular Reactors for Free-Radical Polymerizations. Chemie - Ingenieur - Technik, 95(5), Article 5.
    168. Wenzel, P. M., Mühlen, M., & Radgen, P. (2023). Free Cooling for Saving Energy : Technical Market Analysis of Dry, Wet, and Hybrid Cooling Based on Manufacturer Data. Energies, 16(9), Article 9.
    169. Wild, M., Mast, Y., & Takors, R. (2023). Revisiting Basics of kLa Dependency on Aeration in Bubble Columns: a Is Surprisingly Stable. Chemie - Ingenieur - Technik, 95(4), Article 4.
    170. Wimmer, E. J., Klostermann, S. V., Ringenberg, M., Kästner, J., & Estes, D. P. (2023). Oxo-Bridged Zr Dimers as Well-defined Models of Oxygen Vacancies on ZrO2. European Journal of Inorganic Chemistry, 26(12), Article 12.
    171. Zavoleas, Y., Stevens, P. R., Johnstone, J., & Davidová, M. (2023). More-Than-Human Perspective in Indigenous Cultures : Holistic Systems Informing Computational Models in Architecture, Urban and Landscape Design towards the Post-Anthropocene Epoch. Buildings, 13(1), Article 1.
    172. Zimmer, M., Kleiser, B., Marquetand, J., & Ates, F. (2023). Characterization of Muscle Weakness Due to Myasthenia Gravis Using Shear Wave Elastography. Diagnostics, 13(6), Article 6.
    173. Ziwes, M., Ruopp, J., & Kuhlmann, U. (2023). Studies on steel-to-concrete joints with concentrated loading conditions. Ce/Papers, 6(1), Article 1.
  2. 2022

    1. Ackermann, A. C., Fischer, M., Wick, A., Carosella, S., Bronwyn, L. F., & Middendorf, P. (2022). Mechanical, Thermal and Electrical Properties of Epoxy Nanocomposites with Amine-Functionalized Reduced Graphene Oxide via Plasma Treatment. Journal of Composites Science, 6(6), Article 6.
    2. Adam, S., Bräcker, J., Klingel, V., Osteresch, B., Radde, N. E., Brockmeyer, J., Bashtrykov, P., & Jeltsch, A. (2022). Flanking sequences influence the activity of TET1 and TET2 methylcytosine dioxygenases and affect genomic 5hmC patterns. Communications Biology, 5, 92.
    3. Altmeppen, J., Sommerfeld, H., Koch, C., & Staudacher, S. (2022). Experimental and numerical investigation into the effect of surface roughness on particle rebound. Frontiers in Mechanical Engineering, 1–16.
    4. Arasteh-Khoshbin, O., Seyedpour, S. M., & Ricken, T. (2022). The effect of Caspian Sea water on mechanical properties and durability of concrete containing rice husk ash, nano SiO2SiO2, and nano Al2O3Al2O3. Scientific Reports, 12(1), Article 1.
    5. Aslani, V., Guerra, F., Steinitz, A., Wilhelm, P., & Haist, T. (2022). Averaging approaches for highly accurate image-based edge localization. OSA Continuum, 1(4), Article 4.
    6. Baumann, M., Koch, C., & Staudacher, S. (2022). Application of Neural Networks and Transfer Learning to Turbomachinery Heat Transfer. Aerospace, 9(2), Article 2.
    7. Beck, A., Vogt, F., Hägele, L., Rupp, S., & Zibek, S. (2022). Optimization and Kinetic Modeling of a Fed-Batch Fermentation for Mannosylerythritol Lipids (MEL) Production With Moesziomyces aphidis. Frontiers in Bioengineering and Biotechnology, 10(May), Article May.
    8. Beißwanger, R., Weckerle, M., Pruß, C., & Reichelt, S. (2022). Interferometric radius of curvature measurements : an environmental error treatment. Optics Express, 30(14), Article 14.
    9. Benn, M., & Stoy, C. (2022). BIM for CREM: Exploring the Benefit of Building Information Modelling for Facility Management in Corporate Real Estate Management. Buildings, 12(4), Article 4.
    10. Berkmann, F., Augel, L., Hack, M., Kawaguchi, Y., Weißhaupt, D., Fischer, I. A., & Schulze, J. (2022). Optimization of Fully Integrated Al Nanohole Array-Based Refractive Index Sensors for Use With a LED Light Source. IEEE Photonics Journal, 14(3), Article 3.
    11. Beura, C. P., Beltle, M., Wenger, P., & Tenbohlen, S. (2022). Experimental Analysis of Ultra-High-Frequency Signal Propagation Paths in Power Transformers. Energies, 15(8), Article 8.
    12. Bienert, F., Graf, T., & Abdou Ahmed, M. (2022). Theoretical investigation on the elimination of the period chirp by deliberate substrate deformations. Optics Express, 30(13), Article 13.
    13. Bienert, F., Loescher, A., Röcker, C., Graf, T., & Abdou Ahmed, M. (2022). Experimental analysis on CPA-free thin-disk multipass amplifiers operated in a helium-rich atmosphere. Optics Express, 30(21), Article 21.
    14. Blandini, L., Haase, W., Weidner, S., Böhm, M., Burghardt, T., Roth, D., Sawodny, O., & Sobek, W. (2022). D1244: Design and Construction of the First Adaptive High-Rise Experimental Building. Frontiers in Built Environment, 8(June), Article June.
    15. Blum, M., Derad, L., & Killinger, A. (2022). Deposition of Fluoresceine-Doped HAp Coatings via High-Velocity Suspension Flame Spraying. Coatings, 12(9), Article 9.
    16. Brock, J., Erhardt, J., Eisler, S. A., & Hörning, M. (2022). Optimization of Mechanosensitive Cross-Talk between Matrix Stiffness and Protein Density : Independent Matrix Properties Regulate Spreading Dynamics of Myocytes. Cells, 11(13), Article 13.
    17. Bröhm, A., Schoch, T., Dukatz, M., Graf, N., Dorscht, F., Mantai, E., Adam, S., Bashtrykov, P., & Jeltsch, A. (2022). Methylation of recombinant mononucleosomes by DNMT3A demonstrates efficient linker DNA methylation and a role of H3K36me3. Communications Biology, 5, 192.
    18. Brümmer, F., Schnepf, U., Resch, J., Jemmali, R., Abdi, R., Kamel, H. M., Bonten, C., & Müller, R.-W. (2022). In situ laboratory for plastic degradation in the Red Sea. Scientific Reports, 12, 11956.
    19. Buettner, S. M., Schneider, C., König, W., Nulty, H., Piccolroaz, C., & Sauer, A. (2022). How Do German Manufacturers React to the Increasing Societal Pressure for Decarbonisation? Applied Sciences, 12(2), Article 2.
    20. Byranvand, M. M., Kodalle, T., Zuo, W., Friedlmeier, T. M., Abdelsamie, M., Hong, K., Zia, W., Perween, S., Clemens, O., Sutter-Fella, C. M., & Saliba, M. (2022). One-Step Thermal Gradient- and Antisolvent-Free Crystallization of All-Inorganic Perovskites for Highly Efficient and Thermally Stable Solar Cells. Advanced Science, 9(23), Article 23.
    21. Bárdossy, A., Kilsby, C., Birkinshaw, S., Wang, N., & Anwar, F. (2022). Is Precipitation Responsible for the Most Hydrological Model Uncertainty? Frontiers in Water, 4, 836554.
    22. Böhm, C., Werz, M., & Weihe, S. (2022). Practical Approach to Eliminate Solidification Cracks by Supplementing AlMg4.5Mn0.7 with AlSi10Mg Powder in Laser Powder Bed Fusion. Materials, 15(2), Article 2.
    23. Bücher, T., & Amrouch, H. (2022). Modeling TPU Thermal Maps Under Superlattice Thermoelectric Cooling. IEEE Access, 10, 21970–21978.
    24. Bücher, T., Huber, R., Eschenbaum, C., Mertens, A., Lemmer, U., & Amrouch, H. (2022). Printed temperature sensor array for high-resolution thermal mapping. Scientific Reports, 12, 14231.
    25. Büttner, S. M. (2022). Roadmap to Neutrality : What Foundational Questions Need Answering to Determine One’s Ideal Decarbonisation Strategy. Energies, 15(9), Article 9.
    26. Cerda, C., Guenat, S., Egerer, M., & Fischer, L. K. (2022). Home Food Gardening : Benefits and Barriers During the COVID-19 Pandemic in Santiago, Chile. Frontiers in Sustainable Food Systems, 6, 841386.
    27. Chacon Mateos, M., Laquai, B., Vogt, U., & Stubenrauch, C. (2022). Evaluation of a low-cost dryer for a low-cost optical particle counter. Atmospheric Measurement Techniques, 15(24), Article 24.
    28. Chan, Y. T., Uykur, E., Belyanchikov, M. A., Martin, D., Abalmasov, V. A., Thomas, V., Zhukova, E. S., & Gorshunov, B. (2022). Effect of hydrostatic pressure on the quantum paraelectric state of dipolar coupled water molecular network. Physical Review Research, 4(2), Article 2.
    29. Chen, Y., Guo, F., Schlipf, D., & Cheng, P. W. (2022). Four-dimensional wind field generation for the aeroelastic simulation of wind turbines with lidars. Wind Energy Science, 7(2), Article 2.
    30. Clifton, A., Barber, S., Stökl, A., Frank, H., & Karlsson, T. (2022). Research challenges and needs for the deployment of wind energy in hilly and mountainous regions. Wind Energy Science, 7(6), Article 6.
    31. Dambeebo, D., Dakyaga, F., & Derbile, E. K. (2022). Navigating complexities towards sustainable food crops production : local practices for climate change adaptation in rural Ghana. Discover Sustainability, 3, 11.
    32. Dasari, D., Yang, S., Chakrabarti, A., Finkler, A., Kurizki, G., & Wrachtrup, J. (2022). Anti-Zeno purification of spin baths by quantum probe measurements. Nature Communications, 13, 7527.
    33. Davidová, M., Sharma, S., McMeel, D., & Loizides, F. (2022). Co-De|GT: The Gamification and Tokenisation of More-Than-Human Qualities and Values. Sustainability, 14(7), Article 7.
    34. Donzelli, M., Ferber, T., Vanita, V., Waidha, A. I., Müller, P., Mellin, M., Hausbrand, R., Jaegermann, W., & Clemens, O. (2022). On the Surface Modification of LLZTO with LiF via a Gas-Phase Approach and the Characterization of the Interfaces of LiF with LLZTO as Well as PEO+LiTFSI. Materials, 15(19), Article 19.
    35. Dukatz, M., Dittrich, M., Stahl, E., Adam, S., Mendoza, A. de, Bashtrykov, P., & Jeltsch, A. (2022). DNA methyltransferase DNMT3A forms interaction networks with the CpG site and flanking sequence elements for efficient methylation. The Journal of Biological Chemistry, 298(10), Article 10.
    36. Eisenmann, A., Streubel, T., & Rudion, K. (2022). Power Quality Mitigation via Smart Demand-Side Management Based on a Genetic Algorithm. Energies, 15(4), Article 4.
    37. Eisseler, R., Gutsche, D., Maucher, C., & Möhring, H.-C. (2022). Inverse Determination of Johnson-Cook Parameters of Additively Produced Anisotropic Maraging Steel. Materials, 15(1), Article 1.
    38. El Hachem, A., Seidel, J., Imbery, F., Junghänel, T., & Bardossy, A. (2022). Technical Note: Space–time statistical quality control of extreme precipitation observations. Hydrology and Earth System Sciences, 26(23), Article 23.
    39. Elpelt-Wessel, I., Reiser, M., Morrison, D., & Kranert, M. (2022). Emission Determination by Three Remote Sensing Methods in Two Release Trials. Atmosphere, 13(1), Article 1.
    40. Engelfried, M., Baumann, M., & Bauer, F. (2022). Three-dimensional structure-based approach for the analysis of macroscopic lead structures on sealing counterfaces. International Journal of Metrology and Quality Engineering, 13, 2.
    41. Eppinger, E., Gröning, J. A. D., & Stolz, A. (2022). Chemoenzymatic enantioselective synthesis of phenylglycine and phenylglycine amide by direct coupling of the Strecker synthesis with a nitrilase reaction. Frontiers in Catalysis, 01–16.
    42. Faulhaber, A., Krächan, C., & Haist, T. (2022). Depth from axial differential perspective. Optics Continuum, 1(1), Article 1.
    43. Fendel, V., Kranert, M., Maurer, C., Garcés Sánchez, G., Huang, J., & Ramakrishna, G. (2022). The Impact of Using Co-Compost on Resource Management and Resilience of Smallholder Agriculture in South India. Environments, 9(11), Article 11.
    44. Fendel, V., Kranert, M., Maurer, C., Garcés-Sánchez, G., Huang, J., & Ramakrishna, G. (2022). Stakeholder Assessment on Closing Nutrient Cycles through Co-Recycling of Biodegradable Household Kitchen Waste and Black Water between Rural and Urban Areas in South India. Recycling, 7(4), Article 4.
    45. Fendel, V., Maurer, C., Kranert, M., Huang, J., & Schäffner, B. (2022). The Potential of the Co-Recycling of Secondary Biodegradable Household Resources Including Wild Plants to Close Nutrient and Carbon Cycles in Agriculture in Germany. Sustainability, 14(9), Article 9.
    46. Feuchtmüller, O., Hörl, L., & Bauer, F. (2022). An Empirical Study on the Friction of Reciprocating Rod Seals at Predefined Lubrication Conditions and Shear Rates. Lubricants, 10(4), Article 4.
    47. Fischer, F., Birk, A., Somers, P., Frenner, K., Tarin Sauer, C., & Herkommer, A. (2022). FeaSel-Net: A Recursive Feature Selection Callback in Neural Networks. Machine Learning and Knowledge Extraction, 4(4), Article 4.
    48. Flöß, M., Steinle, T., Gerhardt, I., & Gießen, H. (2022). Femtosecond tunable light source with variable repetition rate between 640 kHz and 41 MHz with a 130 dB temporal pulse contrast ratio. Optics Express, 30(1), Article 1.
    49. Foglszinger, J., Denisenko, A., Kornher, T., Schreck, M., Knolle, W., Yavkin, B., Kolesov, R., & Wrachtrup, J. (2022). TR12 centers in diamond as a room temperature atomic scale vector magnetometer. Npj Quantum Information, 8, 65.
    50. Frey, Y., Franz-Wachtel, M., Macek, B., & Olayioye, M. A. (2022). Proteasomal turnover of the RhoGAP tumor suppressor DLC1 is regulated by HECTD1 and USP7. Scientific Reports, 12, 5036.
    51. Gaugler, L. K., Mast, Y., Fitschen, J., Hofmann, S., Schlüter, M., & Takors, R. (2022). Scaling-down biopharmaceutical production processes via a single multi-compartment bioreactor (SMCB). Engineering in Life Sciences, 23(1), Article 1.
    52. Gil Pérez, M., Zechmeister, C., Kannenberg, F., Mindermann, P., Balangé, L., Guo, Y., Hügle, S., Gienger, A., Forster, D., Bischoff, M., Tarin Sauer, C., Middendorf, P., Schwieger, V., Gresser, G. T., Menges, A., & Knippers, J. (2022). Computational co-design framework for coreless wound fibre–polymer composite structures. Journal of Computational Design and Engineering, 9(2), Article 2.
    53. Gillich, A., & Hufendiek, K. (2022). Asset Profitability in the Electricity Sector : an Iterative Approach in a Linear Optimization Model. Energies, 15(12), Article 12.
    54. Gronle, A., Pruss, C., & Herkommer, A. M. (2022). Misalignment of spheres, aspheres and freeforms in optical measurement systems. Optics Express, 30(2), Article 2.
    55. Grundler, A., Dazer, M., & Herzig, T. (2022). Statistical Power Analysis in Reliability Demonstration Testing : The Probability of Test Success. Applied Sciences, 12(12), Article 12.
    56. Grün, J., Feldmeth, S., & Bauer, F. (2022). Multiphase Computational Fluid Dynamics of Rotary Shaft Seals. Lubricants, 10(12), Article 12.
    57. Guenat, S., & et al. (2022). Meeting sustainable development goals via robotics and autonomous systems. Nature Communications, 13, 3559.
    58. Guma, G., Bucher, P., Letzgus, P., Lutz, T., & Wüchner, R. (2022). High-fidelity aeroelastic analyses of wind turbines in complex terrain : fluid–structure interaction and aerodynamic modeling. Wind Energy Science, 7(4), Article 4.
    59. Gyawali, D. R., & Bárdossy, A. (2022). Development and parameter estimation of snowmelt models using spatial snow-cover observations from MODIS. Hydrology and Earth System Sciences, 26(12), Article 12.
    60. Günther, T., Werum, K., Müller, E., Wolf, M., & Zimmermann, A. (2022). Characterization of Wire-Bonding on LDS Materials and HF-PCBs for High-Frequency Applications. Journal of Manufacturing and Materials Processing, 6(1), Article 1.
    61. Hagenlocher, C., Siebert, R., Taschke, B., Wieske, S., Haußer, A., & Morrison, M. (2022). ER stress-induced cell death proceeds independently of the TRAIL-R2 signaling axis in pancreatic β cells. Cell Death Discovery, 8, 34.
    62. Hartlieb, S., Schober, C., Haist, T., & Reichelt, S. (2022). Accurate single image depth detection using multiple rotating point spread functions. Optics Express, 30(13), Article 13.
    63. Haub, M., Günther, T., Bogner, M., & Zimmermann, A. (2022). Use of PtC Nanotips for Low-Voltage Quantum Tunneling Applications. Micromachines, 13(7), Article 7.
    64. Heiland, J., & Unger, B. (2022). Identification of Linear Time-Invariant Systems with Dynamic Mode Decomposition. Mathematics, 10(3), Article 3.
    65. Heitkämpfer, J., Suckaneck, S., de la Concepción, J. G., Kästner, J., & Molpeceres, G. (2022). The reactivity of pyridine in cold interstellar environments : the reaction of pyridine with the CN radical. Frontiers in Astronomy and Space Sciences, 9, 1020635.
    66. Hermann, S., & Fehr, J. C. (2022). Documenting research software in engineering science. Scientific Reports, 12, 6567.
    67. Hirmer, P., Breitenbücher, U., Del Gaudio, D., Képes, K., Leymann, F., Mitschang, B., Mormul, M., & Przytarski, D. (2022). Situation-aware adaptation of choreographies : The DiStOPT approach. Frontiers in the Internet of Things, 1, 1054963.
    68. Holder, D., Weber, R., & Graf, T. (2022). Analytical Model for the Depth Progress during Laser Micromachining of V-Shaped Grooves. Micromachines, 13(6), Article 6.
    69. Holfelder, B., Klotzbier, T. J., & Schott, N. (2022). Dual-Task Interference in Children with Down Syndrome and Chronological and Mental Age-Matched Healthy Controls. Children, 9(2), Article 2.
    70. Jakstis, K., Dubovik, M., Laikari, A., Mustajärvi, K., Wendling, L., & Fischer, L. K. (2022). Informing the design of urban green and blue spaces through an understanding of Europeans’ usage and preferences. People and Nature, 5(1), Article 1.
    71. Jamali Dogahe, K., Guski, V., Mlikota, M., Schmauder, S., Holweger, W., Spille, J., Mayer, J., Schwedt, A., Görlach, B., & Wranik, J. (2022). Simulation of the Fatigue Crack Initiation in SAE 52100 Martensitic Hardened Bearing Steel during Rolling Contact. Lubricants, 10(4), Article 4.
    72. Johann, K. S., Reißing, A., & Bonten, C. (2022). Comparative Analysis of the Solid Conveying of Regrind, Virgin and Powdery Polyolefins in Single-Screw Extrusion. Journal of Manufacturing and Materials Processing, 6(3), Article 3.
    73. Karl, P., Mennle, S., Ubl, M., Hentschel, M., Flad, P., Yang, J.-W., Peng, T.-Y., Lu, Y.-J., & Gießen, H. (2022). Tunable infrared high absorbing polarization independent niobium nitride plasmonic perfect absorber nanowire photodetectors. Optics Express, 12(7), Article 7.
    74. Karst, J., Lee, Y., Flöß, M., Ubl, M., Ludwigs, S., Hentschel, M., & Gießen, H. (2022). Electro-active metaobjective from metalenses-on-demand. Nature Communications, 13(1), Article 1.
    75. Kaya Keles, C. S., & Ates, F. (2022). Botulinum Toxin Intervention in Cerebral Palsy-Induced Spasticity Management : Projected and Contradictory Effects on Skeletal Muscles. Toxins, 14(11), Article 11.
    76. Keller, J., Scagnetti Goyarzu, C. M., & Albrecht, S. (2022). The Relevance of Recyclability for the Life Cycle Assessment of Packaging Based on Design for Life Cycle. Sustainability, 14(7), Article 7.
    77. Kempf, D., & Munz, C.-D. (2022). Zonal direct-hybrid aeroacoustic simulation of trailing edge noise using a high-order discontinuous Galerkin spectral element method. Acta Acustica, 6, 39.
    78. Klotzbier, T. J., Schott, N., & Almeida, Q. J. (2022). Profiles of Motor-Cognitive Interference in Parkinson’s Disease—The Trail-Walking-Test to Discriminate between Motor Phenotypes. Brain Sciences, 12(9), Article 9.
    79. Klotzbier, T. J., Holfelder, B., & Schott, N. (2022). Associations of Motor Performance and Executive Functions: Comparing Children with Down Syndrome to Chronological and Mental Age-Matched Controls. Children, 9(1), Article 1.
    80. Klotzbier, T. J., Park, S.-Y., Blümer, V., & Schott, N. (2022). Effect of Intermittent Exercise on Performance in 3D Multiple Objects Tracking in Children, Young and Older Adults : A Pilot Study. Journal of Integrative Neuroscience, 21(4), Article 4.
    81. Kolbe, N., Hexemer, L., Bammert, L.-M., Loewer, A., Lukáčová-Medvid’ová, M., & Legewie, S. (2022). Data-based stochastic modeling reveals sources of activity bursts in single-cell TGF-β signaling. PLOS Computational Biology, June, 1–29.
    82. Korn, V., & Pluhackova, K. (2022). Not sorcery after all: Roles of multiple charged residues in membrane insertion of gasdermin-A3. Frontiers in Cell and Developmental Biology, 1–12.
    83. Kosow, H., Wassermann, S., Bartke, S., Goede, P., Grimski, D., Imbert, I., Jenssen, T., Laukel, O., Proske, M., Protzer, J., Schumacher, K. P., Siedentop, S., Wagner-Endres, S., Wittekind, J., & Zimmermann, K. (2022). Addressing Goal Conflicts : New Policy Mixes for Commercial Land Use Management. Land, 11(6), Article 6.
    84. Krämer, K., Brock, J., & Heyer, A. G. (2022). Interaction of Nitrate Assimilation and Photorespiration at Elevated CO2. Frontiers in Plant Science, 13(July), Article July.
    85. Krüger, E. (2022). Magnetic Bands Producing a Monoclinic Magnetic Structure in NiO, FeO, MnO, and a Tetragonal One in CoO. Symmetry, 14(7), Article 7.
    86. Lapin, A., Perfahl, H., Jain, H. V., & Reuss, M. (2022). Integrating a dynamic central metabolism model of cancer cells with a hybrid 3D multiscale model for vascular hepatocellular carcinoma growth. Scientific Reports, 12, 12373.
    87. Laue, F., Adegun, O. B., & Ley, A. (2022). Heat Stress Adaptation within Informal, Low-Income Urban Settlements in Africa. Sustainability, 14(13), Article 13.
    88. Lee, D., Karadimitriou, N., Ruf, M., & Steeb, H. (2022). Detecting micro fractures : a comprehensive comparison of conventional and machine-learning-based segmentation methods. Solid Earth, 13(9), Article 9.
    89. Leis, A., Traunecker, D., Weber, R., & Graf, T. (2022). Tuning the Hardness of Produced Parts by Adjusting the Cooling Rate during Laser-Based Powder Bed Fusion of AlSi10Mg by Adapting the Process Parameters. Metals, 12(12), Article 12.
    90. Letzgus, P., Guma, G., & Lutz, T. (2022). Computational fluid dynamics studies on wind turbine interactions with the turbulent local flow field influenced by complex topography and thermal stratification. Wind Energy Science, 7(4), Article 4.
    91. Li, N., Friedrich, R., & Schieberle, C. (2022). Exposure of Individuals in Europe to Air Pollution and Related Health Effects. Frontiers in Public Health, 10, 871144.
    92. Locke, R. J. C., Goerigk, F. C., Schäfer, M. J., Höppe, H. A., & Schleid, T. (2022). Synthesis, crystal structures and spectroscopic properties of pure YSb2O4Br and YSb2O4Cl as well as Eu3+- and Tb3+-doped samples. RSC Advances, 12(2), Article 2.
    93. Lorenz, M., Klein, M., Hartmann, J., Koch, C., & Staudacher, S. (2022). Prediction of Compressor Blade Erosion Experiments in a Cascade Based on Flat Plate Specimen. Frontiers in Mechanical Engineering, 8, 925395.
    94. Lylina, N., Wang, C.-H., & Wunderlich, H.-J. (2022). A Complete Design-for-Test Scheme for Reconfigurable Scan Networks. Journal of Electronic Testing, 38, 603–621.
    95. Lüdecke, F. D., Schmid, M., Rehe, E., Selvam, S. P., Parspour, N., & Cheng, P. W. (2022). Numerical Aspects of a Two-Way Coupling for Electro-Mechanical Interactions : A Wind Energy Perspective. Energies, 15(3), Article 3.
    96. Mahfouz, M. Y., & Cheng, P.-W. (2022). A passively self-adjusting floating wind farm layout to increase the annual energy production. Wind Energy, 26(3), Article 3.
    97. Mally, L., Werz, M., & Weihe, S. (2022). Feasibility Study on Additive Manufacturing of Ferritic Steels to Meet Mechanical Properties of Safety Relevant Forged Parts. Materials, 15(1), Article 1.
    98. Mangold, J., Silberhorn, D., Möbs, N., Dzikus, N., Hoelzen, J., Zill, T., & Strohmayer, A. (2022). Refueling of LH2 Aircraft-Assessment of Turnaround Procedures and Aircraft Design Implication. Energies, 15(7), Article 7.
    99. Marzouk, M. A., Salheen, M. A., & Fischer, L. K. (2022). Functionalizing building envelopes for greening and solar energy: Between theory and the practice in Egypt. Frontiers in Environmental Science, 01–27.
    100. Meer, J. V. der, Ertel, B., & Seifert, U. (2022). Thermodynamic Inference in Partially Accessible Markov Networks : A Unifying Perspective from Transition-Based Waiting Time Distributions. Physical Review. X, 12(3), Article 3.
    101. Meinel, J., Vorobyov, V., Wang, P., Yavkin, B., Pfender, M., Sumiya, H., Onoda, S., Isoya, J., Liu, R.-B., & Wrachtrup, J. (2022). Quantum nonlinear spectroscopy of single nuclear spins. Nature Communications, 13, 5318.
    102. Miller, M., Rudion, K., Nägele, H., & Schnaars, J. (2022). A grid reinforcement approach for an optimized planning of high-voltage distribution grids under consideration of line loading indicators. IET Renewable Power Generation, 16(9), Article 9.
    103. Miller, O., Gericke, O., Nigl, D., Kovaleva, D., & Blandini, L. (2022). Simulation-Based Investigations of the Load-Bearing Behavior of Concrete Hollow Sphere Slabs Exposed to Fire. Fire, 5(6), Article 6.
    104. Minden, S., Aniolek, M., Noorman, H., & Takors, R. (2022). Performing in spite of starvation: How Saccharomyces cerevisiae maintains robust growth when facing famine zones in industrial bioreactors. Microbial Biotechnology, 16(1), Article 1.
    105. Minden, S., Aniolek, M., Sarkizi, C., Hajian, S., Teleki, A., Zerrer, T., Delvigne, F., Gulik, W. van, Deshmukh, A., Noorman, H., & Takors, R. (2022). Monitoring Intracellular Metabolite Dynamics in Saccharomyces cerevisiae during Industrially Relevant Famine Stimuli. Metabolites, 12(3), Article 3.
    106. Mindermann, P., Gil Pérez, M., Knippers, J., & Gresser, G. T. (2022). Investigation of the Fabrication Suitability, Structural Performance, and Sustainability of Natural Fibers in Coreless Filament Winding. Materials, 15(9), Article 9.
    107. Moreno Mendaza, J., Schmid, M., Scharr, S., & Scheffknecht, G. (2022). Oxy-Combustion of Solid Recovered Fuel in a Semi-Industrial CFB Reactor : on the Implications of Gas Atmosphere and Combustion Temperature. ACS Omega, 7(10), Article 10.
    108. Müller, T., Schick, S., Beck, J., Sprenger, G., & Takors, R. (2022). Synthetic mutualism in engineered E. coli mutant strains as functional basis for microbial production consortia. Engineering in Life Sciences, 23(1), Article 1.
    109. Neef, J., Leverenz, D., & Launay, M. A. (2022). Performance of Micropollutant Removal during Wet-Weather Conditions in Advanced Treatment Stages on a Full-Scale WWTP. Water, 14(20), Article 20.
    110. Neumaier, M., Kranemann, S., Kazmeier, B., & Rudolph, S. (2022). Automated Piping in an Airbus A320 Landing Gear Bay Using Graph-Based Design Languages. Aerospace, 9(3), Article 3.
    111. Nguyen, M. T., Solueva, D., Spyridonos, E., & Dahy, H. (2022). Mycomerge: Fabrication of Mycelium-Based Natural Fiber Reinforced Composites on a Rattan Framework. Biomimetics, 7(2), Article 2.
    112. Nitzlader, M., Steffen, S., Bosch, M. J., Binz, H., Kreimeyer, M., & Blandini, L. (2022). Designing Actuation Concepts for Adaptive Slabs with Integrated Fluidic Actuators Using Influence Matrices. CivilEng, 3(3), Article 3.
    113. Oraby, A., Hug, D., Weickardt, I., Maerz, L., Nebel, S., Kurmann, J., Rupp, S., Tovar, G. E. M., & Zibek, S. (2022). Fermentation and recovery of cellobiose lipids using foam fractionation. Discover Chemical Engineering, 3, 3.
    114. Oraby, A., Rupp, S., & Zibek, S. (2022). Techno-Economic Analysis as a Driver for Optimisation of Cellobiose Lipid Fermentation and Purification. Frontiers in Bioengineering and Biotechnology, 10(June), Article June.
    115. Pajic-Lijakovic1, I., Milivojevic1, M., & Clark, A. G. (2022). Collective Cell Migration on Collagen-I Networks : The Impact of Matrix Viscoelasticity. Frontiers in Cell and Developmental Biology, 10(July), Article July.
    116. Park, S.-Y., & Schott, N. (2022). The Immediate and Sustained Effects of Exercise-Induced Hemodynamic Response on Executive Function During Fine Motor-Cognitive Tasks Using Functional Near-Infrared Spectroscopy. Journal of Integrative Neuroscience, 21(3), Article 3.
    117. Petillon, S., Knöller, A., Bräuer, P., Helm, D., Grözinger, T., Weser, S., Eberhardt, W., Franke, J., & Zimmermann, A. (2022). Flexural Fatigue Test : a Proposed Method to Characterize the Lifetime of Conductor Tracks on Polymeric Substrates. Journal of Manufacturing and Materials Processing, 6(2), Article 2.
    118. Pfezer, D., Karst, J., Hentschel, M., & Gießen, H. (2022). Predicting Concentrations of Mixed Sugar Solutions with a Combination of Resonant Plasmon-Enhanced SEIRA and Principal Component Analysis. Sensors, 22(15), Article 15.
    119. Pirrone, S. R. M., Agabiti, C., Pagan, A. S., & Herdrich, G. H. (2022). A Fast Thermal 1D Model to Study Aerospace Material Response Behaviors in Uncontrolled Atmospheric Entries. Materials, 15(4), Article 4.
    120. Podeur, M., & Vogt, D. M. (2022). Experimental evaluation of heat transfer effect on turbocompressor performance operating with helium-neon gas mixtures. EPJ Techniques and Instrumentation, 9, 6.
    121. Ramme, J., Wegert, R., Guski, V., Schmauder, S., & Möhring, H.-C. (2022). Development of a Multi-Sensor Concept for Real-Time Temperature Measurement at the Cutting Insert of a Single-Lip Deep Hole Drilling Tool. Applied Sciences, 12(14), Article 14.
    122. Ren, J., & Kloker, M. (2022). Non-ideal gas behavior matters in hydrodynamic instability. Scientific Reports, 12, 22089.
    123. Ristok, S., Flad, P., & Gießen, H. (2022). Atomic layer deposition of conformal anti-reflective coatings on complex 3D printed micro-optical systems. Optics Express, 12(5), Article 5.
    124. Ruddat, M. (2022). Public acceptance of wind energy : concepts, empirical drivers and some open questions. Wind Energy Science, 7(4), Article 4.
    125. Sadhu, K., Haghshenas, K., Rouhani, M., & Aiello, M. (2022). Optimal joint operation of coupled transportation and power distribution urban networks. Energy Informatics, 5, 35.
    126. Saemian, P., Tourian, M., AghaKouchak, A., Madani, K., & Sneeuw, N. (2022). How much water did Iran lose over the last two decades? Journal of Hydrology : Regional Studies, 41(June), Article June.
    127. Samad, A., Florez, D. A., Chourdakis, I., & Vogt, U. (2022). Concept of Using an Unmanned Aerial Vehicle (UAV) for 3D Investigation of Air Quality in the Atmosphere-Example of Measurements Near a Roadside. Atmosphere, 13(5), Article 5.
    128. Schlette, T., & Staudacher, S. (2022). Preliminary Design and Analysis of Supersonic Business Jet Engines. Aerospace, 9(9), Article 9.
    129. Schmidt-Scheele, R., Hauser, W., Scheel, O., Minn, F., & et al. (2022). Sustainability assessments of energy scenarios: citizens’ preferences for and assessments of sustainability indicators. Energy, Sustainability and Society, 12, 41.
    130. Schnee, P., Choudalakis, M., Weirich, S., Khella, M. S. W., Carvalho, H., Pleiss, J., & Jeltsch, A. (2022). Mechanistic basis of the increased methylation activity of the SETD2 protein lysine methyltransferase towards a designed super-substrate peptide. Communications Chemistry, 5(1), Article 1.
    131. Schneider, Y., Prabhu, V., Höss, K., Wasserböch, W., Schmauder, S., & Zhou, Z. (2022). Many-Scale Investigations of the Deformation Behavior of Polycrystalline Composites : I-Machine Learning Applied for Image Segmentation. Materials, 15(7), Article 7.
    132. Schneider, Y., Rapp, D. M., Yang, Y., Wasserbäch, W., & Schmauder, S. (2022). Many-Scale Investigations of Deformation Behavior of Polycrystalline Composites : II-Micro-Macro Simultaneous FE and Discrete Dislocation Dynamics Simulation. Materials, 15(8), Article 8.
    133. Schreiber, F., Nöldeke, J., Setzen, Š., Kropp, C., & Ley, A. (2022). The Social Quality of Design-Build : Lessons Learnt from Higher Education. Sustainability, 14(17), Article 17.
    134. Schuk, V., Pombo Jiménez, M., & Martin, U. (2022). Technical specifications to meet the requirements of an Automatic Code Compliance Checking tool and current developments in infrastructure construction. Results in Engineering, 16, 100650.
    135. Schulte im Walde, S., & Frassinelli, D. (2022). Distributional Measures of Semantic Abstraction. Frontiers in Artificial Intelligence, 4, 796756.
    136. Schwab, J., Weber, K., Drozella, J., Jimenez, C. E., Herkommer, A., Bremer, L., Reitzenstein, S., & Gießen, H. (2022). Coupling light emission of single-photon sources into single-mode fibers: mode matching, coupling efficiencies, and thermo-optical effects. Optics Express, 30(18), Article 18.
    137. Schwarz, T. M., Ott, J., Solodenko, H., Schmitz, G., & Stender, P. (2022). Nanoscale analysis of frozen honey by atom probe tomography. Scientific Reports, 12(1), Article 1.
    138. Schwarz-von Raumer, H.-G., Fischer, L., & Jakstis, K. (2022). Levels to Address Human-Nature Relations in Cities Through Geo-data Processing Strategies : A Mini-Review. JoDLA – Journal of Digital Landscape Architecture, 7-2022, 7, 637–648.
    139. Seiberth, K., Thiel, A., & John, J. M. (2022). „It’s My Country I’m Playing for“ : A Biographical Study on National Identity Development of Youth Elite Football Players With Migrant Background. Frontiers in Sports and Active Living, 4(July), Article July.
    140. Sommer, S., Münster, A., Fehrentz, J.-A., & Hauber, W. (2022). Effects of Motivational Downshifts on Specific Pavlovian-Instrumental Transfer in Rats. The International Journal of Neuropsychopharmacology, 25(3), Article 3.
    141. Stolz, K. (2022). Why Do(n’t) We Buy Second-Hand Luxury Products? Sustainability, 14(14), Article 14.
    142. Storchak, M., Drewle, K., Menze, C. J., Stehle, T., & Möhring, H.-C. (2022). Determination of the Tool-Chip Contact Length for the Cutting Processes. Materials, 15(9), Article 9.
    143. Streubel, T., Kattmann, C., Eisenmann, A., & Rudion, K. (2022). Characterization of Supraharmonic Emission from Three Different Electric Vehicle Charging Infrastructures in Time and Frequency Domain. Energies, 15(2), Article 2.
    144. Svatoš-Ražnjević, H., Orozco, L., & Menges, A. (2022). Advanced Timber Construction Industry : a Review of 350 Multi-Storey Timber Projects from 2000–2021. Buildings, 12(4), Article 4.
    145. Teye, M. T., Missah, Y. M., Ahene, E., & Frimpong, T. (2022). Evaluation of Conversational Agents : Understanding Culture, Context and Environment in Emotion Detection. IEEE Access, 10, 24976–24984.
    146. Thomann, S., Nguyen, H. L. G., Genssler, P. R., & Amrouch, H. (2022). All-in-Memory Brain-Inspired Computing Using FeFET Synapses. Frontiers in Electronics, 3, 833260.
    147. Thomaseth, C., & Radde, N. E. (2022). The effect of normalisation and error model choice on the distribution of the maximum likelihood estimator for a biochemical reaction. IET Systems Biology, 17(1), Article 1.
    148. Toulouse, A., Drozella, J., Motzfeld, P., Fahrbach, N., Aslani, V., Thiele, S., Giessen, H., & Herkommer, A. M. (2022). Ultra-compact 3D-printed wide-angle cameras realized by multi-aperture freeform optical design. Optics Express, 30(2), Article 2.
    149. Toulouse, A., Thiele, S., Hirzel, K., Schmid, M., Weber, K., Zyrianova, M., Gießen, H., Herkommer, A. M., & Heymann, M. (2022). High resolution femtosecond direct laser writing with wrapped lens. Optical Materials Express, 12(9), Article 9.
    150. Ulmer, A., Erdemann, F., Mueller, S., Loesch, M., Wildt, S., Jensen, M. L., Gaspar, P., Zeidan, A. A., & Takors, R. (2022). Differential Amino Acid Uptake and Depletion in Mono-Cultures and Co-Cultures of Streptococcus thermophilus and Lactobacillus delbrueckii subsp. bulgaricus in a Novel Semi-Synthetic Medium. Microorganisms, 10(9), Article 9.
    151. Unger, S., Erhard, L., Wieczorek, O., Koß, C., Riebling, J., & Heiberger, R. H. (2022). Benefits and detriments of interdisciplinarity on early career scientists’ performance. An author-level approach for U.S. physicists and psychologists. PLOS ONE, 17(6), Article 6.
    152. Uykur, E., Ortiz, B. R., Wilson, S. D., Dressel, M., & Tsirlin, A. A. (2022). Optical detection of the density-wave instability in the kagome metal KV3Sb5. Npj Quantum Materials, 7, 16.
    153. Villota Narváez, Y. A., Garzón-Alvarado, D. A., Röhrle, O., & Ramírez-Martínez, A. M. (2022). Multi-scale mechanobiological model for skeletal muscle hypertrophy. Frontiers in Physiology, 1–4.
    154. Wagner, J. F., Kohl, M., & Györfi, B. (2022). Reevaluation of Algorithmic Basics for ZUPT-Based Pedestrian Navigation. IEEE Access, 10, 118419–118437.
    155. Waldhof, M., Wochner, I., Stollenmaier, K., Parspour, N., & Schmitt, S. (2022). Design and Scaling of Exoskeleton Power Units Considering Load Cycles of Humans. Robotics, 11(5), Article 5.
    156. Wang, S., Findeisen, L., Leptihn, S., Wallace, M. I., Hörning, M., & Nußberger, S. (2022). Spatiotemporal stop-and-go dynamics of the mitochondrial TOM core complex correlates with channel activity. Communications Biology, 5, 471.
    157. Wasielewski, S., Rott, E., Minke, R., & Steinmetz, H. (2022). Recovery of Ammonium Sulfate Solution by Regeneration of Loaded Clinoptilolite. Nanomaterials, 12(3), Article 3.
    158. Weidner, D., Stoll, D., Kuthada, T., & Wagner, A. (2022). Aerodynamics of High-Speed Trains with Respect to Ground Simulation. Fluids, 7(7), Article 7.
    159. Weiskopf, D. (2022). Uncertainty Visualization: Concepts, Methods, and Applications in Biological Data Visualization. Frontiers in Bioinformatics, 2, 793819.
    160. Wende, M., Drozella, J., Toulouse, A., & Herkommer, A. M. (2022). Fast algorithm for the simulation of 3D-printed microoptics based on the vector wave propagation method. Optics Express, 30(22), Article 22.
    161. Wenz, F., Langner, J., Lutz, T., & Krämer, E. (2022). Impact of the wind field at the complex-terrain site Perdigão on the surface pressure fluctuations of a wind turbine. Wind Energy Science, 7(3), Article 3.
    162. Wenzel, P. M., & Radgen, P. (2022). Multi-Criteria Comparison of Energy and Environmental Assessment Approaches for the Example of Cooling Towers. Applied System Innovation, 5(5), Article 5.
    163. Werum, K., Müller, E., Keck, J., Jäger, J., Horter, T., Gläser, K., Buschkamp, S., Barth, M., Eberhardt, W., & Zimmermann, A. (2022). Aerosol Jet Printing and Interconnection Technologies on Additive Manufactured Substrates. Journal of Manufacturing and Materials Processing, 6(5), Article 5.
    164. Winter, R., Valsamidou, A., Class, H., & Flemisch, B. (2022). A Study on Darcy versus Forchheimer Models for Flow through Heterogeneous Landfills including Macropores. Water, 14(4), Article 4.
    165. Wochner, I., Nölle, L. V., Martynenko, O. V., & Schmitt, S. (2022). „Falling heads“: investigating reflexive responses to head–neck perturbations. Biomedical Engineering Online, 21, 25.
    166. Yang, Q., Zhao, J., Dreyer, F., Krüger, D., & Anders, J. (2022). A portable NMR platform with arbitrary phase control and temperature compensation. Magnetic Resonance, 3(1), Article 1.
    167. Zamre, P., & Lutz, T. (2022). Computational-fluid-dynamics analysis of a Darrieus vertical-axis wind turbine installation on the rooftop of buildings under turbulent-inflow conditions. Wind Energy Science, 7(4), Article 4.
    168. Zhang, C., Dasari, D., Widmann, M., Meinel, J., Vorobyov, V., Kapitanova, P., Nenasheva, E., Nakamura, K., Sumiya, H., Onoda, S., Isoya, J., & Wrachtrup, J. (2022). Quantum-assisted distortion-free audio signal sensing. Nature Communications, 13, 4637.
  3. 2021

    1. Aksoy Aksel, A., Gall, A., Seewald, A., Ferraguti, F., & Ehrlich, I. (2021). Midbrain dopaminergic inputs gate amygdala intercalated cell clusters by distinct and cooperative mechanisms in male mice. Neuroscience, 10, e63708.
    2. Altmann, R., Mehrmann, V., & Unger, B. (2021). Port-Hamiltonian formulations of poroelastic network models. Mathematical and Computer Modelling of Dynamical Systems, 27(1), Article 1.
    3. Ankenbauer, A., Nitschel, R., Teleki, A., Müller, T., Favilli, L., Blombach, B., & Takors, R. (2021). Micro-aerobic production of isobutanol with engineered Pseudomonas putida. Engineering in Life Sciences, 21(7), Article 7.
    4. Ariali, S., & Zinn, B. (2021). Adaptive Training of the Mental Rotation Ability in an Immersive Virtual Environment. International Journal of Emerging Technologies in Learning, 16(9), Article 9.
    5. Aschmoneit, N., Steinlein, S., Kühl, L., Seifert, O., & Kontermann, R. E. (2021). A scDb-based trivalent bispecific antibody for T-cell-mediated killing of HER3-expressing cancer cells. Scientific Reports, 11, 13880.
    6. Bahret, C., & Eltrop, L. (2021). Cost-Optimized Heat and Power Supply for Residential Buildings : the Cost-Reducing Effect of Forming Smart Energy Neighborhoods. Energies, 14(16), Article 16.
    7. Beirow, F., Wahl, J., Hohmuth, R., Richter, A., Pruß, C., Mateo, C. M., Graf, T., & Abdou Ahmed, M. (2021). Increasing the Efficiency of the Intra-Cavity Generation of Ultra-Short Radially Polarized Pulses in Thin-Disk Resonators with Grating Waveguide Structures. OSA Continuum, 4(2), Article 2.
    8. Bethea, J. R., & Fischer, R. (2021). Role of Peripheral Immune Cells for Development and Recovery of Chronic Pain. Frontiers in Immunology, 12, 641588.
    9. Bette, S., Theye, T., Bernhardt, H.-J., Clark, W. P., & Niewa, R. (2021). Confirmation of Siderazot, Fe3N1.33, the Only Terrestrial Nitride Mineral. Minerals, 11(3), Article 3.
    10. Beurer, A.-K., Bruckner, J. R., & Traa, Y. (2021). Influence of the Template Removal Method on the Mechanical Stability of SBA-15. ChemistryOpen, 10(11), Article 11.
    11. Biesner, T., Li, W., Tsirlin, A. A., Roh, S., Wei, P.-C., Uykur, E., & Dressel, M. (2021). Spectroscopic trace of the Lifshitz transition and multivalley activation in thermoelectric SnSe under high pressure. NPG Asia Materials, 13, 12.
    12. Boccellato, C., Kolbe, E., Peters, N., Juric, V., Fullstone, G., Verreault, M., Idbaih, A., Lamfers, M. L. M., Murphy, B. M., & Rehm, M. (2021). Marizomib sensitizes primary glioma cells to apoptosis induced by a latest-generation TRAIL receptor agonist. Cell Death & Disease, 12, 647.
    13. Buchner, M., & Rudion, K. (2021). Identification of Grid Impedance by Broadband Signals in Power Systems with High Harmonics. Energies, 14(21), Article 21.
    14. Buyer, C., Enseling, D., Jüstel, T., & Schleid, T. (2021). Hydrothermal Synthesis, Crystal Structure, and Spectroscopic Properties of Pure and Eu3+-Doped NaYSO42 ∙ H2O and Its Anhydrate NaYSO42. Crystals, 11(6), Article 6.
    15. Bárdossy, A., Modiria, E., Anwara, F., & Pegram, G. (2021). Gridded daily precipitation data for Iran : A comparison of different methods. Journal of Hydrology, 38(December), Article December.
    16. Caydamli, Y., Heudorfer, K., Take, J., Podjaski, F., Middendorf, P., & Buchmeiser, M. R. (2021). Transparent Fiber-Reinforced Composites Based on a Thermoset Resin Using Liquid Composite Molding (LCM) Techniques. Materials, 14(20), Article 20.
    17. Celik, A., Bonten, C., Togni, R., Kloss, C., & Goniva, C. (2021). A Novel Modeling Approach for Plastics Melting within a CFD-DEM Framework. Polymers, 13(2), Article 2.
    18. Cheng, T., Thielen, M., Poppinga, S., Tahouni, Y., Wood, D., Steinberg, T., Menges, A., & Speck, T. (2021). Bio-Inspired Motion Mechanisms : Computational Design and Material Programming of Self-Adjusting 4D-Printed Wearable Systems. Advanced Science, 8(13), Article 13.
    19. Christensen, K. B., Günther, M., Schmitt, S., & Siebert, T. (2021). Cross-bridge mechanics estimated from skeletal muscles’ work-loop responses to impacts in legged locomotion. Scientific Reports, 11, 23638.
    20. Civelek, F., Fritz, K.-P., & Zimmermann, A. (2021). Towards a Tailored Engineering Design Process for Individualized Micro-Mechatronic Systems with a Novel Case-Based Methodology. Applied Sciences, 11(17), Article 17.
    21. Csiszár, G., Lawitzki, R., & Csiszár, O. (2021). Extreme elastic deformable ceramics on the nanoscale : CrxByOz nanowire as an example. Nano Express, 2(4), Article 4.
    22. Davidová, M. (2021). Breathing Artifacts of Urban BioClimatic Layers for Post-Anthropocene Urban Environment. Sustainability, 13(20), Article 20.
    23. Demirel, B., Weng, W., Thalacker, C., Hoban, M., & Barz, S. (2021). Correlations for computation and computation for correlations. Npj Quantum Information, 7, 29.
    24. Detrell Domingo, G. (2021). Chlorella Vulgaris Photobioreactor for Oxygen and Food Production on a Moon Base-Potential and Challenges. Frontiers in Astronomy and Space Sciences : Astrobiology, 8(7), Article 7.
    25. Diem, A. M., Hildenbrand, K., Raafat, L., Bill, J., & Burghard, Z. (2021). Self-Supporting V2O5 Nanofiber-Based Electrodes for Magnesium–Lithium-Ion Hybrid Batteries. RSC Advances, 11(3), Article 3.
    26. Eberhart, M. (2021). Efficient computation of backprojection arrays for 3D light field deconvolution. Optics Express, 29(15), Article 15.
    27. Eberlein, S., & Rudion, K. (2021). Optimisation, benchmark testing and comparison of droop control variants in microgrids. IET Smart Grid, 4(5), Article 5.
    28. Esslinger, S., Grebhardt, A., Jaeger, J., Kern, F., Killinger, A., Bonten, C., & Gadow, R. (2021). Additive Manufacturing of β-Tricalcium Phosphate Components via Fused Deposition of Ceramics (FDC). Materials (Basel), 14(1), Article 1.
    29. Fandiño, D., Guski, V., Wegert, R., Möhring, H.-C., & Schmauder, S. (2021). Simulation Study on Single-Lip Deep Hole Drilling Using Design of Experiments. Journal of Manufacturing and Materials Processing, 5(2), Article 2.
    30. Feuchtmüller, O., Dakov, N., Hörl, L., & Bauer, F. (2021). Remarks on Modeling the Oil Film Generation of Rod Seals. Lubricants, 9(9), Article 9.
    31. Fischer, L. K., & Gopal, D. (2021). Streetscapes as Surrogate Greenspaces During COVID-19? Frontiers in Sustainable Cities : Urban Greening, 3(7), Article 7.
    32. Geist, L. (2021). Definiteness without determiners in German. GLOSSA : A Journal of General Linguistics, 6(1), Article 1.
    33. Geß, A., Lorenz, M., Tolsdorf, A., & Albrecht, S. (2021). Environmental Impacts of Renewable Insulation Materials. Sustainability, 13(15), Article 15.
    34. González-Inostroza, P., Rahmann, C., Álvarez, R., Haas, J., Nowak, W., & Rehtanz, C. (2021). The Role of Fast Frequency Response of Energy Storage Systems and Renewables for Ensuring Frequency Stability in Future Low-Inertia Power Systems. Sustainability, 13(10), Article 10.
    35. González-Nicolás, A., Swientek, M., Sinsbeck, M., & Nowak, W. (2021). Characterization of Export Regimes in Concentration–Discharge Plots via an Advanced Time-Series Model and Event-Based Sampling Strategies. Water, 13(13), Article 13.
    36. Grisin, B., Carosella, S., & Middendorf, P. (2021). Dry Fibre Placement : The Influence of Process Parameters on Mechanical Laminate Properties and Infusion Behaviour. Polymers, 13(21), Article 21.
    37. Guthoff, F., Klempp, N., & Hufendiek, K. (2021). Quantification of the Flexibility Potential through Smart Charging of Battery Electric Vehicles and the Effects on the Future Electricity Supply System in Germany. Energies, 14(9), Article 9.
    38. Günther, M., & Mörl, F. (2021). Giraffes and Hominins : Reductionist Model Predictions of Compressive Loads at the Spine Base for Erect Exponents of the Animal Kingdom. Biology Open, 10(1), Article 1.
    39. Güsewell, J., Scherzinger, K., Holstenkamp, L., Vincent, L., & Eltrop, L. (2021). Extending the Operation of Existing Biogas Plants: Which Follow-Up Concepts and Plants Will Prevail? Frontiers in Energy Research : Bioenergy and Biofuels, 9(11), Article 11.
    40. Hahn, L., & Eberhard, P. (2021). Transient dynamical-thermal-optical system modeling and simulation. Journal of the European Optical Society. Rapid Publications, 17(1), Article 1.
    41. Hardiess, G., & Weissert, C. (2021). Interaction Between Image and Text During the Process of Biblical Art Reception. Journal of Eye Movement Research, 13(2), Article 2.
    42. Haub, M., Bogner, M., Günther, T., Zimmermann, A., & Sandmaier, H. (2021). Development and Proof of Concept of a Miniaturized MEMS Quantum Tunneling Accelerometer Based on PtC Tips by Focused Ion Beam 3D Nano-Patterning. Sensors, 21(11), Article 11.
    43. Haub, M., Günther, T., Bogner, M., & Zimmermann, A. (2021). Investigation of Focused Ion and Electron Beam Platinum Carbon Nano-Tips with Transmission Electron Microscopy for Quantum Tunneling Vacuum Gap Applications. Applied Sciences, 11(24), Article 24.
    44. Heinemann, P. M., Armbruster, D., & Hauer, B. (2021). Active-site loop variations adjust activity and selectivity of the cumene dioxygenase. Nature Communications, 12(1), Article 1.
    45. Hemmerling, J., Guhathakurta, J., Dettinger, F., Fill, A., & Birke, K. P. (2021). Non-Uniform Circumferential Expansion of Cylindrical Li-Ion Cells : the Potato Effect. Batteries, 7(3), Article 3.
    46. Hermann, M., Teleki, A., Weitz, S., Niess, A., Freund, A., Bengelsdorf, F. R., Dürre, P., & Takors, R. (2021). Identifying and Engineering Bottlenecks of Autotrophic Isobutanol Formation in Recombinant C. ljungdahlii by Systemic Analysis. Frontiers in Bioengineering and Biotechnology : Synthetic Biology, 9, 647853.
    47. Hinze, M., Schmidt, A., & Leine, R. I. (2021). Finite Element Formulation of Fractional Constitutive Laws Using the Reformulated Infinite State Representation. Fractal and Fractional, 5(3), Article 3.
    48. Holder, D., Buser, M., Boley, S., Weber, R., & Graf, T. (2021). Image Processing Based Detection of the Fibre Orientation during Depth-Controlled Laser Ablation of CFRP Monitored by Optical Coherence Tomography. Materials & Design, 203, 109567.
    49. Huang, J., & Voß, B. (2021). Simulation of Folding Kinetics for Aligned RNAs. Genes, 12(3), Article 3.
    50. Hummel, U., Radgen, P., Ülker, S., & Schelle, R. (2021). Findings from Measurements of the Electric Power Demand of Air Compressors. Energies, 14(24), Article 24.
    51. Hüttenhain, B., & Kübler, A. I. (2021). City and Industry: How to Cross Borders? : Learning From Innovative Company Site Transformations. Urban Planning, 6(3), Article 3.
    52. Iakutkina, O., Rosslhuber, R., Kawamoto, A., & Dressel, M. (2021). Dielectric Anomaly and Charge Fluctuations in the Non-Magnetic Dimer Mott Insulator λ-(BEDT-STF)2GaCl4. Crystals, 11(9), Article 9.
    53. Janek, F., Eichhorn, N., Weser, S., Gläser, K., Eberhardt, W., & Zimmermann, A. (2021). Embedding of Ultrathin Chips in Highly Flexible, Photosensitive Solder Mask Resist. Micromachines, 12(8), Article 8.
    54. Kaeswurm, J. A. H., Nestl, B., Richter, S. M., Emperle, M., & Buchweitz, M. (2021). Purification and Characterization of Recombinant Expressed Apple Allergen Mal d 1. Methods and Protocols, 4(1), Article 1.
    55. Kaeswurm, J. A. H., Scharinger, A., Teipel, J., & Buchweitz, M. (2021). Absorption Coefficients of Phenolic Structures in Different Solvents Routinely Used for Experiments. Molecules, 26(15), Article 15.
    56. Kaffai, M., & Heiberger, R. H. (2021). Modeling non-pharmaceutical interventions in the COVID-19 pandemic with survey-based simulations. PLoS ONE, 16(10), Article 10.
    57. Karl, P., Mennle, S., Ubl, M., Flad, P., Yang, J.-W., Peng, T.-Y., Lu, Y.-J., & Gießen, H. (2021). Niobium nitride plasmonic perfect absorbers for tunable infrared superconducting nanowire photodetection. Optics Express, 29(11), Article 11.
    58. Kattelmann, F., Siegle, J., Cunha Montenegro, R., Sehn, V., Blesl, M., & Fahl, U. (2021). How to Reach the New Green Deal Targets : Analysing the Necessary Burden Sharing within the EU Using a Multi-Model Approach. Energies, 14(23), Article 23.
    59. Klotzbier, T. J., Wollesen, B., Vogel, O., Rudisch, J., Cordes, T., Jöllenbeck, T., & Vogt, L. (2021). An interrater reliability study of gait analysis systems with the dual task paradigm in healthy young and older adults. European Review of Aging and Physical Activity, 18, 17.
    60. Korkmaz, P., Schmid, D., & Fahl, U. (2021). Incorporating uncertainties towards a sustainable European energy system : a stochastic approach for decarbonization paths focusing on the transport sector. Energy Strategy Reviews, 38, 100707.
    61. Krüger, E. (2021). Magnetic Structure of CoO. Symmetry, 13(8), Article 8.
    62. Kölblin, P., Bartler, A., & Füller, M. (2021). Image Preprocessing for Outdoor Luminescence Inspection of Large Photovoltaic Parks. Energies, 14(9), Article 9.
    63. Lehrecke, A., Tucker, C., Yang, X., Baszynski, P., & Dahy, H. (2021). Tailored Lace : Moldless Fabrication of 3D Bio-Composite Structures through an Integrative Design and Fabrication Process. Applied Sciences, 11(22), Article 22.
    64. Leis, A., Weber, R., & Graf, T. (2021). Process Window for Highly Efficient Laser-Based Powder Bed Fusion of AlSi10Mg with Reduced Pore Formation. Materials, 14(18), Article 18.
    65. Leverenz, D., Schneider, F., Schmidt, T., Hafner, G., Nevárez, Z., & Kranert, M. (2021). Food Waste Generation in Germany in the Scope of European Legal Requirements for Monitoring and Reporting. Sustainability, 13(12), Article 12.
    66. Loescher, A., Oldorf, P., Peters, R., Pallmann, W., Resan, B., Lesparre, F., Beaure d’Augères, P., Delen, X., Balembois, F., Georges, P., Giedl-Wagner, R., De Loor, R., Graf, T., & Abdou Ahmed, M. (2021). Efficient and high-throughput ablation of platinum using high-repetition rate radially and azimuthally polarized sub-picosecond laser pulses. Optics Express, 29(13), Article 13.
    67. Ludwig, S., Ruchka, P., Pedrini, G., Peng, X., & Osten, W. (2021). Scatter-Plate Microscopy with Spatially Coherent Illumination and Temporal Scatter Modulation. Optics Express, 29(3), Article 3.
    68. Luz, P., Zhang, L., Wang, J., & Schwieger, V. (2021). Lane-Level Map-Aiding Approach Based on Non-Lane-Level Digital Map Data in Road Transport Security. Sustainability, 13(17), Article 17.
    69. Mathew, D. M., Kattan, H., Weis, C., Henkel, J., Wehn, N., & Amrouch, H. (2021). Longevity of Commodity DRAMs in Harsh Environments Through Thermoelectric Cooling. IEEE Access, 9, 83650–83962.
    70. Meinel, J., Vorobyov, V., Yavkin, B., Dasari, D., Sumiya, H., Onoda, S., Isoya, J., & Wrachtrup, J. (2021). Heterodyne sensing of microwaves with a quantum sensor. Nature Communications, 12, 2737.
    71. Mindermann, P., Bodea, S., Menges, A., & Gresser, G. T. (2021). Development of an Impregnation End-Effector with Fiber Tension Monitoring for Robotic Coreless Filament Winding. Processes, 9(5), Article 5.
    72. Mindermann, P., Rongen, B., Gubetini, D., Knippers, J., & Gresser, G. T. (2021). Material Monitoring of a Composite Dome Pavilion Made by Robotic Coreless Filament Winding. Materials, 14(19), Article 19.
    73. Modiri, E., & Bárdossy, A. (2021). Clustering Simultaneous Occurrences of the Extreme Floods in the Neckar Catchment. Water, 13(4), Article 4.
    74. Momeni Boroujeni, S., Fill, A., Ridder, A., & Birke, K. P. (2021). Influence of Temperature and Electrolyte Composition on the Performance of Lithium Metal Anodes. Batteries, 7(4), Article 4.
    75. Moreno Mendaza, J., Hornberger, M., Schmid, M., & Scheffknecht, G. (2021). Oxy-Fuel Combustion of Hard Coal, Wheat Straw, and Solid Recovered Fuel in a 200 kWth Calcium Looping CFB Calciner. Energies, 14(8), Article 8.
    76. Murugan, S., Klostermann, S. V., Frey, W., Kästner, J., & Buchmeiser, M. R. (2021). A sodium bis(perfluoropinacol) borate-based electrolyte for stable, high-performance room temperature sodium-sulfur batteries based on sulfurized poly(acrylonitrile). Electrochemistry Communications, 132, 107137.
    77. Mühlich, M., González San Martin, E. A., Born, L., Körner, A., Schwill, L., Gresser, G. T., & Knippers, J. (2021). Deformation Behavior of Elastomer-Glass Fiber-Reinforced Plastics in Dependence of Pneumatic Actuation. Biomimetics, 6(3), Article 3.
    78. Naumann, S. (2021). Strategies for Pore-Diameter Control in Mesoporous Carbons Derived from Organic Self-Assembly Processes. Organic Materials, 03(02), Article 02.
    79. Nisaa, A. F., Krauss, M., & Spuhler, D. (2021). Adapting Santiago Method to Determine Appropriate and Resource Efficient Sanitation Systems for an Urban Settlement in Lima Peru. Water, 13(9), Article 9.
    80. Orlando, M., Buchholz, P. C. F., Lotti, M., & Pleiss, J. (2021). The GH19 Engineering Database : Sequence diversity, substrate scope, and evolution in glycoside hydrolase family 19. PLoS ONE, 16(10), Article 10.
    81. Park, S.-Y., Klotzbier, T. J., & Schott, N. (2021). The Effects of the Combination of High-Intensity Interval Training with 3D-Multiple Object Tracking Task on Perceptual-Cognitive Performance : a Randomized Controlled Intervention Trial. International Journal of Environmental Research and Public Health, 18(9), Article 9.
    82. Pletz, C. (2021). Which Factors Promote and Inhibit the Technology Acceptance of Immersive Virtual Reality Technology in Teaching-Learning Contexts? : Results of an Expert Survey. International Journal of Emerging Technologies in Learning, 16(13), Article 13.
    83. Polatkan, S., & Uykur, E. (2021). Optical Response of Chiral Multifold Semimetal PdGa. Crystals, 11(2), Article 2.
    84. Prakash, O., Gupta, A., Pahwa, G., Chauhan, Y. S., & Amrouch, H. (2021). On the Critical Role of Ferroelectric Thickness for Negative Capacitance Device-Circuit Interaction. IEEE Journal of the Electron Devices Society, 9, 1262–1268.
    85. Prehofer, S., Kosow, H., Naegler, T., Pregger, T., Vögele, S., & Weimer-Jehle, W. (2021). Linking qualitative scenarios with quantitative energy models : knowledge integration in different methodological designs. Energy, Sustainability and Society, 11, 25.
    86. Pustogow, A., Rösslhuber, R., Tan, Y., Uykur, E., Böhme, A., Wenzel, M., Saito, Y., Löhle, A., Hübner, R., Kawamoto, A., Schlueter, J. A., Dobrosavljević, V., & Dressel, M. (2021). Low-temperature dielectric anomaly arising from electronic phase separation at the Mott insulator-metal transition. Npj Quantum Materials, 6, 9.
    87. Pustogow, A., Saito, Y., Löhle, A., Sanz Alonso, M., Kawamoto, A., Dobrosavljević, V., Dressel, M., & Fratini, S. (2021). Rise and fall of Landau’s quasiparticles while approaching the Mott transition. Nature Communications, 12, 1571.
    88. Raschhofer, J., Kerekes, G. A., Harmening, C., Neuner, H., & Schwieger, V. (2021). Estimating Control Points for B-Spline Surfaces Using Fully Populated Synthetic Variance–Covariance Matrices for TLS Point Clouds. Remote Sensing, 13(16), Article 16.
    89. Rathert, P. (2021). Structure, Activity and Function of the NSD3 Protein Lysine Methyltransferase. Life, 11(8), Article 8.
    90. Rebers, L., Reichsöllner, R., Regett, S., Tovar, G. E. M., Borchers, K., Baudis, S., & Southan, A. (2021). Differentiation of physical and chemical cross-linking in gelatin methacryloyl hydrogels. Scientific Reports, 11, 3256.
    91. Rehner, P., & Bauer, G. (2021). Application of Generalized (Hyper-) Dual Numbers in Equation of State Modeling. Frontiers in Chemical Engineering : Computational Methods in Chemical Engineering, 3(10), Article 10.
    92. Reiff, C., Buser, M., Betten, T., Onuseit, V., Hoßfeld, M., Wehner, D., & Riedel, O. (2021). A Process-Planning Framework for Sustainable Manufacturing. Energies, 14(18), Article 18.
    93. Ren, W., Foltyn, P., Geppert, A., & Weigand, B. (2021). Air entrapment and bubble formation during droplet impact onto a single cubic pillar. Scientific Reports, 11, 18018.
    94. Renninger, S., Rößner, P., Stein, J., Lambarth, M., & Birke, K. P. (2021). Towards High Efficiency CO2 Utilization by Glow Discharge Plasma. Processes, 9(11), Article 11.
    95. Resch, J., Dreier, J., Bonten, C., & Kreutzbruck, M. (2021). Miscibility and Phase Separation in PMMA/SAN Blends Investigated by Nanoscale AFM-IR. Polymers, 13(21), Article 21.
    96. Richter, F., Williams, S. K., John, K., Huber, C., Vaslin, C., Zanker, H., Fairless, R., Pichi, K., Marhenke, S., Vogel, A., Dhaen, M.-A., Herrmann, S., Herrmann, A., Pfizenmaier, K., Bantel, H., Diem, R., Kontermann, R. E., & Fischer, R. (2021). The TNFR1 Antagonist Atrosimab Is Therapeutic in Mouse Models of Acute and Chronic Inflammation. Frontiers in Immunology : Inflammation, 12, 705485.
    97. Riede, J. M., Holm, C., Schmitt, S., & Häufle, D. F. B. (2021). The control effort to steer self-propelled microswimmers depends on their morphology : comparing symmetric spherical versus asymmetric L-shaped particles. Royal Society Open Science, 8(9), Article 9.
    98. Rodrigues Marques Sakiyama, N., Carlo, J. C., Mazzaferro, L., & Garrecht, H. (2021). Building Optimization through a Parametric Design Platform : using Sensitivity Analysis to Improve a Radial-Based Algorithm Performance. Sustainability, 13(10), Article 10.
    99. Rodrigues Marques Sakiyama, N., Frick, J., Bejat, T., & Garrecht, H. (2021). Using CFD to Evaluate Natural Ventilation through a 3D Parametric Modeling Approach. Energies, 14(8), Article 8.
    100. Sachse, R., Geiger, F., Scheven, M. von, & Bischoff, M. (2021). Motion Design with Efficient Actuator Placement for Adaptive Structures that Perform Large Deformations. Frontiers in Built Environment : Computational Methods in Structural Engineering, 7, 545962.
    101. Saito, Y., Löhle, A., Kawamoto, A., Pustogow, A., & Dressel, M. (2021). Pressure-Tuned Superconducting Dome in Chemically-Substituted κ-(BEDT-TTF)2Cu2(CN)3. Crystals, 11(7), Article 7.
    102. Sajadi, F., Tiemann, J.-M., Bandari, N., Cheloee Darabi, A., Mola, J., & Schmauder, S. (2021). Fatigue Improvement of AlSi10Mg Fabricated by Laser-Based Powder Bed Fusion through Heat Treatment. Metals, 11(5), Article 5.
    103. Sakiyama, F. I. H., Lehmann, F., & Garrecht, H. (2021). A Novel Runtime Algorithm for the Real-Time Analysis and Detection of Unexpected Changes in a Real-Size SHM Network with Quasi-Distributed FBG Sensors. Sensors, 21(8), Article 8.
    104. Saleh, R., Barth, M., Eberhardt, W., & Zimmermann, A. (2021). Bending Setups for Reliability Investigation of Flexible Electronics. Micromachines, 12(1), Article 1.
    105. Schick, C. F., Klempp, N., & Hufendiek, K. (2021). Impact of Network Charge Design in an Energy System with Large Penetration of Renewables and High Prosumer Shares. Energies, 14(21), Article 21.
    106. Schilling, M. B., Wang, C. X., Shi, Y. G., Kremer, R. K., Dressel, M., & Pronin, A. V. (2021). Fractional Power-Law Intraband Optical Conductivity in the Low-Dimensional Dirac Material CaMnBi2. Crystals, 11(4), Article 4.
    107. Schneider, L., Herkt, S., Wang, L., Feld, C., Wesely, J., Kuvardina, O. N., Meyer, A., Oellerich, T., Häupl, B., Seifried, E., Bonig, H., & Lausen, J. (2021). PRMT6 activates cyclin D1 expression in conjunction with the transcription factor LEF1. Oncogenesis, 10, 42.
    108. Schneider, Y., Wasserbäch, W., Schmauder, S., Zhou, Z., Zielke, R., & Tillmann, W. (2021). A Numerical Method to Improve the Representativeness of Real Microstructure Cut-Outs Applied in Finite Element Simulations. Crystals, 11(4), Article 4.
    109. Schneider, Y., Zielke, R., Xu, C., Tayyab, M., Weber, U., Schmauder, S., & Tillmann, W. (2021). Experimental Investigations of Micro-Meso Damage Evolution for a Co/WC-Type Tool Material with Application of Digital Image Correlation and Machine Learning. Materials, 14(13), Article 13.
    110. Schulz, M., & Hufendiek, K. (2021). Discussing the Actual Impact of Optimizing Cost and GHG Emission Minimal Charging of Electric Vehicles in Distributed Energy Systems. Energies, 14(3), Article 3.
    111. Schwarz, T. M., Dietrich, C. A., Ott, J., Weikum, E. M., Lawitzki, R., Solodenko, H., Hadjixenophontos, E., Gault, B., Kästner, J., Schmitz, G., & Stender, P. (2021). 3D sub-nanometer analysis of glucose in an aqueous solution by cryo-atom probe tomography. Scientific Reports, 11, 11607.
    112. Schwenck, A., Günther, T., & Zimmermann, A. (2021). Characterization and Benchmark of a Novel Capacitive and Fluidic Inclination Sensor. Sensors, 21(23), Article 23.
    113. Seckinger, N., & Radgen, P. (2021). Dynamic Prospective Average and Marginal GHG Emission Factors-Scenario-Based Method for the German Power System until 2050. Energies, 14(9), Article 9.
    114. Seitz, G., Mohammadi, F., & Class, H. (2021). Thermochemical Heat Storage in a Lab-Scale Indirectly Operated CaO/Ca(OH)2 Reactor-Numerical Modeling and Model Validation through Inverse Parameter Estimation. Applied Sciences, 11(2), Article 2.
    115. Seyedpour, S. M., Valizadeh, I., Kirmizakis, P., Doherty, R., & Ricken, T. (2021). Optimization of the Groundwater Remediation Process Using a Coupled Genetic Algorithm-Finite Difference Method. Water, 13(3), Article 3.
    116. Steffen, S., Nitzlader, M., Burghardt, T., Binz, H., Blandini, L., & Sobek, W. (2021). An Actuator Concept for Adaptive Concrete Columns. Actuators, 10(10), Article 10.
    117. Steier, K., Guski, V., & Schmauder, S. (2021). Numerical Investigations on the Damage Behaviour of a Reconstructed Anode for Solid Oxide Fuel Cell Application. Energies, 14(23), Article 23.
    118. Ströbel, M., Kiefer, L., & Birke, K. P. (2021). Investigation of a Novel Ecofriendly Electrolyte-Solvent for Lithium-Ion Batteries with Increased Thermal Stability. Batteries, 7(4), Article 4.
    119. Ströbel, M., Pross-Brakhage, J., Kopp, M., & Birke, K. P. (2021). Impedance Based Temperature Estimation of Lithium Ion Cells Using Artificial Neural Networks. Batteries, 7(4), Article 4.
    120. Sun, Q.-C., Song, T., Anderson, E., Brunner, A., Förster, J., Shalomayeva, T., Taniguchi, T., Watanabe, K., Gräfe, J., Stöhr, R., Xu, X., & Wrachtrup, J. (2021). Magnetic domains and domain wall pinning in atomically thin CrBr3 revealed by nanoscale imaging. Nature Communications, 12(1), Article 1.
    121. Thalacker, C., Hahn, F., Jong, J. de, Pappa, A., & Barz, S. (2021). Anonymous and secret communication in quantum networks. New Journal of Physics, 23(8), Article 8.
    122. Tomalka, A., Weidner, S., Hahn, D., Seiberl, W., & Siebert, T. (2021). Power Amplification Increases With Contraction Velocity During Stretch-Shortening Cycles of Skinned Muscle Fibers. Frontiers in Physiology : Striated Muscle Physiology, 12, 644981.
    123. Trimpe, F., Lück, S., Naumann, R., & Salander, C. (2021). Simulation of Torsional Vibration of Driven Railway Wheelsets Respecting the Drive Control Response on the Vibration Excitation in the Wheel-Rail Contact Point. Vibration, 4(1), Article 1.
    124. Tschöpe, M., Schröder, B., Erfort, S., & Rauhut, G. (2021). High-Level Rovibrational Calculations on Ketenimine. Frontiers in Chemistry : Astrochemistry, 8, 623641.
    125. Upendar, S., Ando, R. F., Schmidt, M. A., & Weiss, T. (2021). Orders of Magnitude Loss Reduction in Photonic Bandgap Fibers by Engineering the Core Surround. Optics Express, 29(6), Article 6.
    126. Vasala, S., Alff, L., & Clemens, O. (2021). Tuning of superdiamagnetism in La2CuO4 by solid-state electrochemical fluorination and defluorination. APL Materials, 9(4), Article 4.
    127. Vieten, T., Stahl, D., Schilling, P., Civelek, F., & Zimmermann, A. (2021). Feasibility Study of Soft Tooling Inserts for Injection Molding with Integrated Automated Slides. Micromachines, 12(7), Article 7.
    128. Vieten, T., Zanin, D., Knöller, A., Litwin, T., Eberhardt, W., & Zimmermann, A. (2021). Soft Tooling-Friendly Inductive Mold Heating : a Novel Concept. Micromachines, 12(4), Article 4.
    129. Vishwakarma, B. D., Zhang, J., & Sneeuw, N. (2021). Downscaling GRACE total water storage change using partial least squares regression. Scientific Data, 8, 95.
    130. Vorobyov, V., Zaiser, S., Abt, N., Meinel, J., Dasari, D., Neumann, P., & Wrachtrup, J. (2021). Quantum Fourier transform for nanoscale quantum sensing. Npj Quantum Information, 7, 124.
    131. Wagner, J., Hagenlocher, C., Hummel, M., Olowinsky, A., Weber, R., & Graf, T. (2021). Synchrotron X-ray Analysis of the Influence of the Magnesium Content on the Absorptance during Full-Penetration Laser Welding of Aluminum. Metals, 11, 797.
    132. Wasielewski, S., Rott, E., Minke, R., & Steinmetz, H. (2021). Application of Natural Clinoptilolite for Ammonium Removal from Sludge Water. Molecules, 26(1), Article 1.
    133. Weimer, J., Koch, D., Nitzsche, M., Haarer, J., Roth-Stielow, J., & Kallfass, I. (2021). Miniaturization and Thermal Design of a170 W AC/DC Battery Charger UtilizingGaN Power Devices. IEEE Open Journal of Power Electronics, 3, 13–25.
    134. Wenzel, P. M., Radgen, P., & Westermeyer, J. (2021). Comparing Exergy Analysis and Physical Optimum Method Regarding an Induction Furnace. Energies, 14(6), Article 6.
    135. Wenzelburger, P., & Allgöwer, F. (2021). Model Predictive Control for Flexible Job Shop Scheduling in Industry 4.0 †. Applied Sciences, 11(17), Article 17.
    136. Wiranata Wijaya, A., Verhagen, N., Teleki, A., & Takors, R. (2021). Compartment-specific 13C metabolic flux analysis reveals boosted NADPH availability coinciding with increased cell-specific productivity for IgG1 producing CHO cells after MTA treatment. Engineering in Life Sciences, 21(12), Article 12.
    137. Xin, L., Duan, X., & Liu, N. (2021). Dimerization and oligomerization of DNA-assembled building blocks for controlled multi-motion in high-order architectures. Nature Communications, 12, 3207.
    138. Yan, S., Verestek, W., Zeizinger, H., & Schmauder, S. (2021). Characterization of Cure Behavior in Epoxy Using Molecular Dynamics Simulation Compared with Dielectric Analysis and DSC. Polymers, 13(18), Article 18.
    139. Yang, Y., Balangé, L., Gericke, O., Schmeer, D., Zhang, L., Sobek, W., & Schwieger, V. (2021). Monitoring of the Production Process of Graded Concrete Component Using Terrestrial Laser Scanning. Remote Sensing, 13(9), Article 9.
    140. Youssefi, R., Maier, J., & Scheffknecht, G. (2021). Pilot-Scale Experiences on a Plasma Ignition System for Pulverized Fuels. Energies, 14(16), Article 16.
    141. Youssefi, R., Segers, T., Norman, F., Maier, J., & Scheffknecht, G. (2021). Experimental Investigations of the Ignitability of Several Coal Dust Qualities. Energies, 14(19), Article 19.
    142. Zaiser, S., Cheung, C. T., Yang, S., Dasari, D. B. R., Raeisi, S., & Wrachtrup, J. (2021). Cyclic cooling of quantum systems at the saturation limit. Npj Quantum Information, 7, 92.
    143. Zhou, N., Georgiou, Y., Pospieszny, M., Zhong, L., Zhou, H., Niethammer, C., Pejak, B., Marko, O., & Hoppe, D. (2021). Container orchestration on HPC systems through Kubernetes. Journal of Cloud Computing, 10, 16.
    144. Ziegler, M., Hägele, L., Gäbele, T., & Takors, R. (2021). CRISPRi enables fast growth followed by stable aerobic pyruvate formation in Escherichia coli without auxotrophy. Engineering in Life Sciences, 22(2), Article 2.
  4. 2020

    1. Altan, E., Seide, S., Bayram, I., Gizzi, L., Ertan, H., & Röhrle, O. (2020). A Systematic Review and Meta-Analysis on the Longitudinal Effects of Unilateral Knee Extension Exercise on Muscle Strength. Frontiers in Sports and Active Living : Biomechanics and Control of Human Movement, 2(11), Article 11.
    2. Ankenbauer, A., Schäfer, R. A., Viegas, S. C., Pobre, V., Voß, B., Arraiano, C. M., & Takors, R. (2020). Pseudomonas Putida KT2440 is Naturally Endowed to withstand Industrial-Scale Stress Conditions. Microbial Biotechnology, 13(4), Article 4.
    3. Bader, K., Müller, C., Molard, Y., Baro, A., Ehni, P., Knelles, J., & Laschat, S. (2020). Fluorenone Imidazolium Salts as Novel de Vries Materials. RSC Advances, 10(40), Article 40.
    4. Bauer, C., & Gießen, H. (2020). Tailoring the Plasmonic Fano Resonance in Metallic Photonic Crystals. Nanophotonics, 9(2), Article 2.
    5. Beck, A., & Zibek, S. (2020). Growth Behavior of Selected Ustilaginaceae Fungi Used for Mannosylerythritol Lipid (MEL) Biosurfactant Production : Evaluation of a Defined Culture Medium. Frontiers in Bioengineering and Biotechnology, 8, 555280.
    6. Betten, T., Shammugam, S., & Graf, R. (2020). Adjustment of the Life Cycle Inventory in Life Cycle Assessment for the Flexible Integration into Energy Systems Analysis. Energies, 13(17), Article 17.
    7. Blum, M., Krieg, P., Killinger, A., Gadow, R., Luth, J., & Trenkle, F. (2020). High Velocity Suspension Flame Spraying (HVSFS) of Metal Suspensions. Materials, 13(3), Article 3.
    8. Brauchler, A., Ziegler, P., & Eberhard, P. (2020). Examination of Polarization Coupling in a Plucked Musical Instrument String via Experiments and Simulations. Acta Acustica, 4(3), Article 3.
    9. Bárdossy, A., Anwar, F., & Seidel, J. (2020). Hydrological Modelling in Data Sparse Environment : Inverse Modelling of a Historical Flood Event. Water, 12(11), Article 11.
    10. Böhm, C., Werz, M., & Weihe, S. (2020). Dilution Ratio and the Resulting Composition Profile in Dissimilar Laser Powder Bed Fusion of AlSi10Mg and Al99.8. Metals, 10(9), Article 9.
    11. Cho, H., Atanasov, V., Krieg, H. M., & Kerres, J. A. (2020). Novel Anion Exchange Membrane Based on Poly(Pentafluorostyrene) Substituted with Mercaptotetrazole Pendant Groups and Its Blend with Polybenzimidazole for Vanadium Redox Flow Battery Applications. Polymers, 12(4), Article 4.
    12. Class, H., Weishaupt, K., & Trötschler, O. (2020). Experimental and Simulation Study on Validating a Numerical Model for CO2 Density-Driven Dissolution in Water. Water, 12(3), Article 3.
    13. Dabrowski, M. L., Hamann, M., & Stubenrauch, C. (2020). Formulation and Polymerization of Foamed 1,4-BDDMA-In-Water Emulsions. RSC Advances, 10(15), Article 15.
    14. Defrance, J., & Weiss, T. (2020). On the Pole Expansion of Electromagnetic Fields. Optics Express, 28(22), Article 22.
    15. Di Bari, R., Horn, R., Nienborg, B., Klinker, F., Kieseritzky, E., & Pawelz, F. (2020). The Environmental Potential of Phase Change Materials in Building Applications : a Multiple Case Investigation Based on Life Cycle Assessment and Building Simulation. Energies, 13(12), Article 12.
    16. Diem, A. M., Fenk, B., Bill, J., & Burghard, Z. (2020). Binder-free V2O5 Cathode for High Energy Density Rechargeable Aluminum-Ion Batteries. Nanomaterials, 10(2), Article 2.
    17. Emmert, S., Davis, K., Gerlach, R., & Class, H. (2020). The Role of Retardation, Attachment and Detachment Processes during Microbial Coal-Bed Methane Production after Organic Amendment. Water, 12(11), Article 11.
    18. Fehr, J., Schmid, P., Schneider, G., & Eberhard, P. (2020). Modeling, Simulation, and Vision-/MPC-Based Control of a PowerCube Serial Robot. Applied Sciences, 10(20), Article 20.
    19. Feith, A., Schwentner, A., Teleki, A., Favilli, L., Blombach, B., & Takors, R. (2020). Streamlining the Analysis of Dynamic 13C-Labeling Patterns for the Metabolic Engineering of Corynebacterium glutamicum as l-Histidine Production Host. Metabolites, 10(11), Article 11.
    20. Feldmeyer, D., Meisch, C., Sauter, H., & Birkmann, J. (2020). Using OpenStreetMap Data and Machine Learning to Generate Socio-Economic Indicators. ISPRS International Journal of Geo-Information, 9(9), Article 9.
    21. Ferdowsi, P., Ochoa-Martinez, E., Alonso, S. S., Steiner, U., & Saliba, M. (2020). Ultrathin Polymeric Films for Interfacial Passivation in Wide Band-Gap Perovskite Solar Cells. Scientific Reports, 10, 22260.
    22. Fischer, R., Kontermann, R. E., & Pfizenmaier, K. (2020). Selective Targeting of TNF Receptors as a Novel Therapeutic Approach. Frontiers in Cell and Developmental Biology, 8, 401.
    23. Goerigk, F. C., Paterlini, V., Dorn, K. V., Mudring, A.-V., & Schleid, T. (2020). Synthesis and Crystal Structure of the Short LnSb2O4Br Series (Ln = Eu–Tb) and Luminescence Properties of Eu3+-Doped Samples. Crystals, 10(12), Article 12.
    24. Graf, M., Haas, T., Teleki, A., Feith, A., Cerff, M., Wiechert, W., Nöh, K., Busche, T., Kalinowski, J., & Takors, R. (2020). Revisiting the Growth Modulon of Corynebacterium glutamicum Under Glucose Limited Chemostat Conditions. Frontiers in Bioengineering and Biotechnology, 8, 584614.
    25. Gygli, G., Xu, X., & Pleiss, J. (2020). Meta-Analysis of Viscosity of Aqueous Deep Eutectic Solvents and their Components. Scientific Reports, 10, 21395.
    26. Günther, T., Diegel, L., Röder, M., Drexler, M., Haybat, M., Wappler, P., Soltani, M., & Zimmermann, A. (2020). Surface Optimization of Micro-Integrated Reflective Optical Elements by Thermoset Injection Molding. Applied Sciences, 10(12), Article 12.
    27. Hajian, C. S. S., Haringa, C., Noorman, H., & Takors, R. (2020). Predicting By-Product Gradients of Baker’s Yeast Production at Industrial Scale : a Practical Simulation Approach. Processes, 8(12), Article 12.
    28. He, J., Cui, Y., Liu, Y., & Wang, H. (2020). Probabilistic Analysis of Crack Growth in Railway Axles Using a Gaussian Process. Advances in Mechanical Engineering, 12(9), Article 9.
    29. Heim, F., Kreher, T., & Birke, K. P. (2020). The Influence of Micro-Structured Anode Current Collectors in Combination with Highly Concentrated Electrolyte on the Coulombic Efficiency of In-Situ Deposited Li-Metal Electrodes with Different Counter Electrodes. Batteries, 6(1), Article 1.
    30. Hellmuth, R., Wehner, F., & Giannakidis, A. (2020). Datasets of Captured Images of Three Different Devices for Photogrammetry Calculation Comparison and Integration into a Laserscan Point Cloud of a Built Environment. Data in Brief, 33(December), Article December.
    31. Henzler, K., Maier, S. D., Jäger, M., & Horn, R. (2020). SDG-Based Sustainability Assessment Methodology for Innovations in the Field of Urban Surfaces. Sustainability, 12(11), Article 11.
    32. Hermann, M., Teleki, A., Weitz, S., Niess, A., Freund, A., Bengelsdorf, F. R., & Takors, R. (2020). Electron Availability in CO2, CO and H2 Mixtures Constrains Flux Distribution, Energy Management and Product Formation in Clostridium ljungdahlii. Microbial Biotechnology, 13(6), Article 6.
    33. Holfelder, B., Klotzbier, T. J., Eisele, M., & Schott, N. (2020). Hot and Cool Executive Function in Elite- and Amateur- Adolescent Athletes From Open and Closed Skills Sports. Frontiers in Psychology : Movement Science and Sport Psychology, 11, 694.
    34. Hommel, J., Akyel, A., Frieling, Z., Phillips, A. J., Gerlach, R., Cunningham, A. B., & Class, H. (2020). A Numerical Model for Enzymatically Induced Calcium Carbonate Precipitation. Applied Sciences, 10(13), Article 13.
    35. Jahnke, T., Raafat, L., Hotz, D., Knöller, A., Diem, A. M., Bill, J., & Burghard, Z. (2020). Highly Porous Free-Standing rGO/SnO2 Pseudocapacitive Cathodes for High-Rate and Long-Cycling Al-Ion Batteries. Nanomaterials, 10(10), Article 10.
    36. Jamshed, A., Birkmann, J., Feldmeyer, D., & Rana, I. A. (2020). A Conceptual Framework to Understand the Dynamics of Rural-Urban Linkages for Rural Flood Vulnerability. Sustainability, 12(7), Article 7.
    37. Janek, F., Saller, E., Müller, E., Meißner, T., Weser, S., Barth, M., Eberhardt, W., & Zimmermann, A. (2020). Feasibility Study of an Automated Assembly Process for Ultrathin Chips. Micromachines, 11(7), Article 7.
    38. Kaeswurm, J. A. H., Könighofer, L., Hogg, M., Scharinger, A., & Buchschweitz, M. (2020). Impact of B-Ring Substitution and Acylation with Hydroxy Cinnamic Acids on the Inhibition of Porcine α-Amylase by Anthocyanin-3-Glycosides. Foods, 9(3), Article 3.
    39. Kamenskyi, D. L., Pronin, A. V., Benia, H. M., Martovitskii, V. P., Pervakov, K. S., & Selivanov, Y. G. (2020). Bulk Cyclotron Resonance in the Topological Insulator Bi2Te3. Crystals, 10(9), Article 9.
    40. Karl, P., Ubl, M., Hentschel, M., Flad, P., Chiao, Z.-Y., Yang, J.-W., Lu, Y.-J., & Gießen, H. (2020). Optical Properties of Niobium Nitride Plasmonic Nanoantennas for the Near- and Mid-Infrared Spectral Range. Optical Materials Express, 10(10), Article 10.
    41. Karst, J., Hentschel, M., Sterl, F., Linnenbank, H., Ubl, M., & Gießen, H. (2020). Optimizing Magnesium Thin Films for Optical Switching Applications : Rules and Recipes. Optical Materials Express, 10(6), Article 6.
    42. Karst, J., Sterl, F., Linnenbank, H., Weiss, T., Hentschel, M., & Gießen, H. (2020). Watching in Situ the Hydrogen Diffusion Dynamics in Magnesium on the Nanoscale. Science Advances, 6(19), Article 19.
    43. Keller, S., Liedek, A., Shendi, D., Bach, M., Tovar, G. E. M., Kluger, P. J., & Southan, A. (2020). Eclectic Characterisation of Chemically Modified Cell-Derived Matrices Obtained by Metabolic Glycoengineering and Re-Assessment of Commonly Used Methods. RSC Advances, 10, 35273–35286.
    44. Kerekes, G., & Schwieger, V. (2020). Elementary Error Model Applied to Terrestrial Laser Scanning Measurements : Study Case Arch Dam Kop. Mathematics, 8(4), Article 4.
    45. Keßelring, M., Wagner, F., Kirsch, M., Ajjabou, L., & Gloaguen, R. (2020). Development of Sustainable Test Sites for Mineral Exploration and Knowledge Spillover for Industry. Sustainability, 12(5), Article 5.
    46. Khella, M. S., Bröhm, A., Weirich, S., & Jeltsch, A. (2020). Mechanistic Insights into the Allosteric Regulation of the Clr4 Protein Lysine Methyltransferase by Autoinhibition and Automethylation. International Journal of Molecular Sciences, 21(22), Article 22.
    47. Knöller, A., Widenmeyer, M., Bill, J., & Burghard, Z. (2020). Fast-Growing Bacterial Cellulose with Outstanding Mechanical Properties via Cross-Linking by Multivalent Ions. Materials, 13(12), Article 12.
    48. Krüger, E. (2020). Structural Distortion Stabilizing the Antiferromagnetic and Insulating Ground State of NiO. Symmetry, 12(1), Article 1.
    49. Krüger, E. (2020). Nonadiabatic Atomic-Like State Stabilizing Antiferromagnetism and Mott Insulation in MnO. Symmetry, 12(11), Article 11.
    50. Krüger, E. (2020). Wannier States of FCC Symmetry Qualifying Paramagnetic NiO to be a Mott Insulator. Symmetry, 12(5), Article 5.
    51. Kuritz, K., Stöhr, D., Maichl, D. S., Pollak, N., Rehm, M., & Allgöwer, F. (2020). Reconstructing Temporal and Spatial Dynamics from Single-Cell Pseudotime Using Prior Knowledge of Real Scale Cell Densities. Scientific Reports, 10, 3619.
    52. Martins, V. C., Cutajar, S., van der Hoven, C., Baszyński, P., & Dahy, H. (2020). FlexFlax Stool: Validation of Moldless Fabrication of Complex Spatial Forms of Natural Fiber-Reinforced Polymer (NFRP) Structures through an Integrative Approach of Tailored Fiber Placement and Coreless Filament Winding Techniques. Applied Sciences, 10(9), Article 9.
    53. Meier, L., Raps, J., & Leistner, P. (2020). Insect Habitat-Systems Integrated in Façades-Impact on Building Physics and Awareness of Society. Sustainability, 12(2), Article 2.
    54. Meng, L., Ji, J., Röhrer, C., Kleem, G., Graf, T., & Abdou Ahmed, M. (2020). Analysis of Material Concentration in Step-Index Fibers with Alumina Cores Produced by Means of the Powder-In-Tube Technique. Optics Express, 28(19), Article 19.
    55. Meyer, A., Herkt, S., Kunze-Schumacher, H., Kohrs, N., Ringleb, J., Schneider, L., Kuvardina, O. N., Öllerich, T., Häupl, B., Krüger, A., Seifried, E., Bonig, H., & Lausen, J. (2020). The Transcription Factor TAL1 and miR-17-92 Create a Regulatory Loop in Hematopoiesis. Scientific Reports, 10, 21438.
    56. Mlikota, M., & Schmauder, S. (2020). A Newly Discovered Relation between the Critical Resolved Shear Stress and the Fatigue Endurance Limit for Metallic Materials. Metals, 10(6), Article 6.
    57. Mörz, F., Steinle, T., Linnenbank, H., Steinmann, A., & Gießen, H. (2020). Alignment-Free Difference Frequency Light Source Tunable from 5 to 20 µm by Mixing Two Independently Tunable OPOs. Optics Express, 28(8), Article 8.
    58. Müller, D., Fill, A., & Birke, K. P. (2020). Cycling of Double-Layered Graphite Anodes in Pouch-Cells. Batteries, 8(3), Article 3.
    59. Müller, H. A., Joshi, Y., Hadjixenophontos, E., Peter, C., Csiszár, G., Richter, G., & Schmitz, G. (2020). High Capacity Rock Salt Type Li2MnO3−δ Thin Film Battery Electrodes. RSC Advances, 10, 3636–3645.
    60. Müller, J., Siemann-Herzberg, M., & Takors, R. (2020). Modeling Cell-Free Protein Synthesis Systems : Approaches and Applications. Frontiers in Bioengineering and Biotechnology : Synthetic Biology, 8, 584178.
    61. Münster, A., Votteler, A., Sommer, S., & Hauber, W. (2020). Role of the Medial Orbitofrontal Cortex and Ventral Tegmental Area in Effort-Related Responding. Cerebral Cortex Communications, 1(1), Article 1.
    62. Nething, C., Smirnova, M., Gröning, J. A. D., Haase, W., Stolz, A., & Sobek, W. (2020). A Method for 3D Printing Bio-Cemented Spatial Structures Using Sand and Urease Active Calcium Carbonate Powder. Materials and Design, 195(October), Article October.
    63. Neuhaus, R., Zahiri, N., Petrs, J., Tahouni, Y., Siegert, J., Kolaric, I., Dahy, H., & Bauernhansl, T. (2020). Integrating Ionic Electroactive Polymer Actuators and Sensors into Adaptive Building Skins : Potentials and Limitations. Frontiers in Built Environment, 6, 95.
    64. Nägele, M., Steinle, T., Mörz, F., Linnenbank, H., Steinmann, A., & Gießen, H. (2020). Compact Harmonic Cavity Optical Parametric Oscillator for Optical Parametric Amplifier Seeding. Optics Express, 28(17), Article 17.
    65. Oladyshkin, S., Mohammadi, F., Kröker, I., & Nowak, W. (2020). Bayesian3 Active Learning for the Gaussian Process Emulator Using Information Theory. Entropy, 22(8), Article 8.
    66. Oraby, A., Werner, N., Sungur, Z., & Zibek, S. (2020). Factors Affecting the Synthesis of Cellobiose Lipids by Sporisorium scitamineum. Frontiers in Bioengineering and Biotechnology : Industrial Biotechnology, 8(11), Article 11.
    67. Perfahl, H., Jain, H. V., Joshi, T., Horger, M., Malek, N., Bitzer, M., & Reuß, M. (2020). Hybrid Modelling of Transarterial Chemoembolisation Therapies (TACE) for Hepatocellular Carcinoma (HCC). Scientific Reports, 10, 10571.
    68. Poh, W.-H., Lin, J., Colley, B., Müller, N., Goh, B. C., Schleheck, D., Sahili, A. E., Marquardt, A., Yang, L., Kjelleberg, S., Lescar, J., Rice, S. A., & Klebensberger, J. (2020). The SiaABC Threonine Phosphorylation Pathway Controls Biofilm Formation in Response to Carbon Availability in Pseudomonas aeruginosa. PLoS ONE, 15(11), Article 11.
    69. Praditia, T., Walser, T., Oladyshkin, S., & Nowak, W. (2020). Improving Thermochemical Energy Storage Dynamics Forecast with Physics-Inspired Neural Network Architecture. Energies, 13(15), Article 15.
    70. Reinhardt, T., Campero, A. N. V., Minke, R., Schönberger, H., & Rott, E. (2020). Batch Studies of Phosphonate and Phosphate Adsorption on Granular Ferric Hydroxide (GFH) with Membrane Concentrate and Its Synthetic Replicas. Molecules, 25(21), Article 21.
    71. Rihaczek, G., Klammer, M., Başnak, O., Petrš, J., Grisin, B., Dahy, H., Carosella, S., & Middendorf, P. (2020). Curved Foldable Tailored Fiber Reinforcements for Moldless Customized Bio-Composite Structures : Proof of Concept: Biomimetic NFRP Stools. Polymers, 12(9), Article 9.
    72. Ristok, S., Thiele, S., Toulouse, A., Herkommer, A. M., & Gießen, H. (2020). Stitching-Free 3D Printing of Millimeter-Sized Highly Transparent Spherical and Aspherical Optical Components. Optical Materials Express, 10(10), Article 10.
    73. Rohwer, A., Dressel, M., & Nakamura, T. (2020). Deuteration Effects on the Transport Properties of (TMTTF)2X Salts. Crystals, 10(12), Article 12.
    74. Rott, E., Happel, O., Armbruster, D., & Minke, R. (2020). Influence of Wastewater Discharge on the Occurrence of PBTC, HEDP, and Aminophosphonates in Sediment, Suspended Matter, and the Aqueous Phase of Rivers. Water, 12(3), Article 3.
    75. Scheben, H., Klempp, N., & Hufendiek, K. (2020). Impact of Long-Term Water Inflow Uncertainty on Wholesale Electricity Prices in Markets with High Shares of Renewable Energies and Storages. Energies, 13(9), Article 9.
    76. Scherle, M., & Nieken, U. (2020). Simultaneous Optimization of Process Operational and Material Parameters for a 2-Bed Adsorption Refrigeration Process. ChemEngineering, 4(2), Article 2.
    77. Schuhmacher, M. K., Beldar, S., Khella, M. S., Bröhm, A., Ludwig, J., Tempel, W., Weirich, S., Min, J., & Jeltsch, A. (2020). Sequence specificity analysis of the SETD2 protein lysine methyltransferase and discovery of a SETD2 super-substrate. Communications Biology, 3, 511.
    78. Schulz, M., Kemmler, T., Kumm, J., Hufendiek, K., & Thomas, B. (2020). A More Realistic Heat Pump Control Approach by Application of an Integrated Two-Part Control. Energies, 13(11), Article 11.
    79. Schwarz, T. M., Weikum, E. M., Meng, K., Hadjixenophontos, E., Dietrich, C. A., Kästner, J., Stender, P., & Schmitz, G. (2020). Field Evaporation and Atom Probe Tomography of Pure Water Tips. Scientific Reports, 10, 20271.
    80. Shoarinezhad, V., Wieprecht, S., & Haun, S. (2020). Comparison of Local and Global Optimization Methods for Calibrating of a 3D Morphodynamic Model of a Curved Channel. Water, 12(5), Article 5.
    81. Siebler, F., Lapin, A., & Takors, R. (2020). Synergistically Applying 1-D Modeling and CFD for Designing Industrial Scale Bubble Column Syngas Bioreactors. Engineering in Life Sciences, 20(7), Article 7.
    82. Sinsbeck, M., Höge, M., & Nowak, W. (2020). Exploratory-Phase-Free Estimation of GP Hyperparameters in Sequential Design Methods : at the Example of Bayesian Inverse Problems. Frontiers in Artificial Intelligence : AI in Food, Agriculture and Water, 3, 52.
    83. Sippach, T., Dahy, H., Uhlig, K., Grisin, B., Carosella, S., & Middendorf, P. (2020). Structural Optimization through Biomimetic-Inspired Material-Specific Application of Plant-Based Natural Fiber-Reinforced Polymer Composites (NFRP) for Future Sustainable Lightweight Architecture. Polymers, 12(12), Article 12.
    84. Steffen, S., Weidner, S., Blandini, L., & Sobek, W. (2020). Using Influence Matrices as a Design and Analysis Tool for Adaptive Truss and Beam Structures. Frontiers in Built Environment : Computational Methods in Structural Engineering, 6, 83.
    85. Torralba-Díaz, L., Schimeczek, C., Reeg, M., Savvidis, G., Deissenroth-Uhrig, M., Guthoff, F., Fleischer, B., & Hufendiek, K. (2020). Identification of the Efficiency Gap by Coupling a Fundamental Electricity Market Model and an Agent-Based Simulation Model. Energies, 13(15), Article 15.
    86. Tristán, A., Heuberger, F., & Sauer, A. (2020). A Methodology to Systematically Identify and Characterize Energy Flexibility Measures in Industrial Systems. Energies, 13(22), Article 22.
    87. Ullrich, T., Weirich, S., & Jeltsch, A. (2020). Development of an Epigenetic Tetracycline Sensor System Based on DNA Methylation. PLOS ONE, 15(5), Article 5.
    88. Verhagen, N., Wijaya, A. W., Teleki, A., Fadhlullah, M., Unsöld, A., Schilling, M., Heinrich, C., & Takors, R. (2020). Comparison of L-tyrosine Containing Dipeptides Reveals Maximum ATP Availability for L-prolyl-L-tyrosine in CHO Cells. Engineering in Life Sciences, 20(9/10), Article 9/10.
    89. Verhagen, N., Zieringer, J., & Takors, R. (2020). Methylthioadenosine (MTA) Boosts Cell-Specific Productivities of Chinese Hamster Ovary Cultures : Dosage Effects on Proliferation, Cell Cycle and Gene Expression. FEBS Open Bio, 10(2), Article 2.
    90. Wagner, J. L., Gienger, A., Stein, C., Arnold, P., Tarín Sauer, C., Sawodny, O., & Böhm, M. (2020). Optimal Static Load Compensation With Fault Tolerance in Nonlinear Adaptive Structures Under Input and State Constraints. Frontiers in Built Environment, 6, 93.
    91. Walter, C. A., Martens, S., Zander, C., Mehring, C., & Nieken, U. (2020). Heat Transfer through Wire Cloth Micro Heat Exchanger. Energies, 13(14), Article 14.
    92. Weber, K., Werdehausen, D., König, P., Thiele, S., Schmid, M., Decker, M., William De Oliveira, P., Herkommer, A., & Gießen, H. (2020). Tailored Nanocomposites for 3D Printed Micro-Optics. Optical Materials Express, 10(10), Article 10.
    93. Wehrmann, M., Toussaint, M., Pfannstiel, J., Billard, P., & Klebensberger, J. (2020). The Cellular Response to Lanthanum is Substrate Specific and Reveals a Novel Route for Glycerol Metabolism in Pseudomonas Putida KT2440. Molecular Biology and Physiology, 11(2), Article 2.
    94. Wellekötter, J., & Bonten, C. (2020). Direct Joule Heating as a Means to Efficiently and Homogeneously Heat Thermoplastic Prepregs. Polymers, 12(12), Article 12.
    95. Wellekötter, J., Resch, J., Baz, S., Gresser, G. T., & Bonten, C. (2020). Insights into the Processing of Recycled Carbon Fibers via Injection Molding Compounding. Journal of Composites Science, 4(4), Article 4.
    96. Willems, F., Reitinger, P., & Bonten, C. (2020). Calibration of Fiber Orientation Simulations for LFT-A New Approach. Journal of Composites Science, 4(4), Article 4.
    97. Wochner, I., Drieß, D., Zimmermann, H., Häufle, D. F. B., Toussaint, M., & Schmitt, S. (2020). Optimality Principles in Human Point-to-Manifold Reaching Accounting for Muscle Dynamics. Frontiers in Computational Neuroscience, 14, 38.
    98. Wölfle, J., Nitzsche, M., Ruthardt, J., & Roth-Stielow, J. (2020). Junction Temperature Control System to Increase the Lifetime of IGBT-Power-Modules in Synchronous Motor Drives Without Affecting Torque and Speed. IEEE Open Journal of Power Electronics, 1, 273–283.
    99. Xia, J., Eigenberger, G., Strathmann, H., & Nieken, U. (2020). Acid-Base Flow Battery, Based on Reverse Electrodialysis with Bi-Polar Membranes : Stack Experiments. Processes, 8(1), Article 1.
    100. Zhang, L., Balangé, L., Braun, K., Di Bari, R., Horn, R., Hos, P. D., Kropp, C., Leistner, P., & Schweiger, V. (2020). Quality as Driver for Sustainable Construction—Holistic Quality Model and Assessment. Sustainability, 12(19), Article 19.
    101. Zhukova, E. S., Zhang, H., Martovitskiy, V. P., Selivanov, Y. G., Gorshunov, B. P., & Dressel, M. (2020). Infrared Optical Conductivity of Bulk Bi2Te2Se. Crystals, 10(7), Article 7.
    102. Ziegler, M., Zieringer, J., & Takors, R. (2020). Transcriptional Profiling of the Stringent Response Mutant Strain E. coli SR Reveals Enhanced Robustness to Large-Scale Conditions. Microbial Biotechnology.
  5. 2019

    1. Allgaier, M., Halder, J. M., Kittelberger, J., Hauer, B., & Nebel, B. A. (2019). A Simple and Robust LC-ESI Single Quadrupole MS-Based Method to Analyze Neonicotinoids in Honey Bee Extracts. MethodsX, 6, 2484–2491.
    2. Atanasova, P., Atanasov, V., Wittum, L., Southan, A., Choi, E., Wege, C., Kerres, J., Eiben, S., & Bill, J. (2019). Hydrophobization of Tobacco Mosaic Virus to Control the Mineralization of Organic Templates. Nanomaterials, 9(5), Article 5.
    3. Autenrieth, C., & Ghosh, R. (2019). The methoxylated, highly conjugated C40 carotenoids, spirilloxanthin and anhydrorhodovibrin, can be separated using high performance liquid chromatography with safe and environmentally friendly solvents. Metabolites, 9(2), Article 2.
    4. Becker, M., Junghans, L., Teleki, A., Bechmann, J., & Takors, R. (2019). The Less the Better : how Suppressed Base Addition Boosts Production of Monoclonal Antibodies with Chinese Hamster Ovary Cells. Frontiers in Bioengineering and Biotechnology, 7, 76.
    5. Bergmann, D., Denzel, J., Baden, A., Kugler, L., & Strohmayer, A. (2019). Innovative Scaled Test Platform e-Genius-Mod : Scaling Methods and Systems Design. Aerospace, 6(2), Article 2.
    6. Biesner, T., & Uykur, E. (2019). Pressure-Tuned Interactions in Frustrated Magnets : Pathway to Quantum Spin Liquids? Crystals, 10(1), Article 1.
    7. Boroujeni, S. M., & Birke, K. P. (2019). Study of a Li-Ion Cell Kinetics in Five Regions to Predict Li Plating Using a Pseudo Two-Dimensional Model. Sustainability, 11(22), Article 22.
    8. Bubeck, C., Widenmeyer, M., Richter, G., Coduri, M., Goering, E., Yoon, S., & Weidenkaff, A. (2019). Tailoring of an Unusual Oxidation State in a Lanthanum Tantalum (IV) Oxynitride via Precursor Microstructure Design. Communications Chemistry, 2(1), Article 1.
    9. Chen, X., Greiner, J. N., Wrachtrup, J., & Gerhardt, I. (2019). Single Photon Randomness based on a Defect Center in Diamond. Scientific Reports, 9(1), Article 1.
    10. Dahy, H. (2019). Natural Fibre-Reinforced Polymer Composites (NFRP) Fabricated from Lignocellulosic Fibres for Future Sustainable Architectural Applications, Case Studies: Segmented-Shell Construction, Acoustic Panels, and Furniture. Sensors, 19(3), Article 3.
    11. Dorn, K. V., & Hartenbach, I. (2019). Press to Success : Gd5FW3O16—The First Gadolinium(III) Fluoride Oxidotungstate(VI). Crystals, 9(8), Article 8.
    12. Eberhart, M., Löhle, S., Strelnikov, B., Hedin, J., Khaplanov, M., Fasoulas, S., Gumbel, J., Lübken, F.-J., & Rapp, M. (2019). Atomic oxygen number densities in the mesosphere-lower thermosphere region measured by solid electrolyte sensors on WADIS-2. Atmospheric Measurement Techniques, 12(4), Article 4.
    13. Elkelesh, A., Ebada, M., Cammerer, S., Schmalen, L., & ten Brink, S. (2019). Decoder-in-the-Loop : Genetic Optimization-Based LDPC Code Design. IEEE Access, 7, 141161–141170.
    14. Faas, S., Bielke, U., Weber, R., & Graf, T. (2019). Scaling the Productivity of Laser Structuring Processes Using Picosecond Laser Pulses at Average Powers of up to 420 W to Produce Superhydrophobic Surfaces on Stainless Steel AISI 316L. Scientific Reports, 9(1933), Article 1933.
    15. Farag, A., Ubl, M., Konzelmann, A., Hentschel, M., & Giessen, H. (2019). Utilizing Niobium Plasmonic Perfect Absorbers for Tunable Near- and Mid-IR Photodetection. Optics Express, 27(18), Article 18.
    16. Feith, A., Teleki, A., Graf, M., Favilli, L., & Takors, R. (2019). HILIC-Enabled 13C Metabolomics Strategies : Comparing Quantitative Precision and Spectral Accuracy of QTOF High- and QQQ Low-Resolution Mass Spectrometry. Metabolites, 9(4), Article 4.
    17. Feldmeyer, D., Wilden, D., Kind, C., Kaiser, T., Goldschmidt, R., Diller, C., & Birkmann, J. (2019). Indicators for Monitoring Urban Climate Change Resilience and Adaptation. Sustainability, 11(10), Article 10.
    18. Fritzen, F., Fernandez, M., & Larsson, F. (2019). On-the-Fly Adaptivity for Nonlinear Twoscale Simulations Using Artificial Neural Networks and Reduced Order Modeling. Frontiers in Materials, 6, 75.
    19. Graf, M., Haas, T., Müller, F., Buchmann, A., Harm-Bekbenbetova, J., Freund, A., Nieß, A., Persicke, M., Kalinowski, J., Blombach, B., & Takors, R. (2019). Continuous Adaptive Evolution of a Fast-Growing Corynebacterium glutamicum Strain Independent of Protocatechuate. Frontiers in Microbiology, 10, 1648.
    20. Haas, T., Graf, M., Nieß, A., Busche, T., Kalinowski, J., Blombach, B., & Takors, R. (2019). Identifying the Growth Modulon of Corynebacterium Glutamicum. Frontiers in Microbiology, 10, 974.
    21. Hagenlocher, C., Fetzer, F., Weller, D., Weber, R., & Graf, T. (2019). Explicit Analytical Expressions for the Influence of Welding Parameters on the Grain Structure of Laser Beam Welds in Aluminium Alloys. Materials & Design, 174, 107791.
    22. Halter, W., Eisele, R., Rothenstein, D., Bill, J., & Allgöwer, F. (2019). Moment Dynamics of Zirconia Particle Formation for Optimizing Particle Size Distribution. Nanomaterials, 9(3), Article 3.
    23. Halter, W., Murray, R. M., & Allgöwer, F. (2019). Analysis of Primitive Genetic Interactions for the Design of a Genetic Signal Differentiator. Synthetic Biology, 4(1), Article 1.
    24. Hütt, F., Kamenskyi, D., Neubauer, D., Shekhar, C., Felser, C., Dressel, M., & Pronin, A. V. (2019). Terahertz Transmission Through TaAs Single Crystals in Simultaneously Applied Magnetic and Electric Fields : Possible Optical Signatures of the Chiral Anomaly in a Weyl Semimetal. Results in Physics, 15, 102630.
    25. Jäckle, M., Linnenbank, H., Hentschel, M., Saliba, M., Tikhodeev, S. G., & Gießen, H. (2019). Tunable green lasing from circular grating distributed feedback based on CH3NH3PbBr3 perovskite. Optical Materials Express, 9(5), Article 5.
    26. Katzmeier, F., Aufinger, L., Dupin, A., Quintero, J., Lenz, M., Bauer, L., Klumpe, S., Sherpa, D., Dürr, B., Honemann, M., Styazhkin, I., Simmel, F. C., & Heymann, M. (2019). A Low-Cost Fluorescence Reader for in vitro Transcription and Nucleic Acid Detection with Cas13a. PLOS ONE, 14(12), Article 12.
    27. Kilper, S., Jahnke, T., Wiegers, K., Grohe, V., Burghard, Z., Bill, J., & Rothenstein, D. (2019). Peptide Controlled Shaping of Biomineralized Tin(II) Oxide into Flower-Like Particles. Materials, 12(6), Article 6.
    28. Küstner, L., Nägele, T., & Heyer, A. G. (2019). Mathematical modeling of diurnal patterns of carbon allocation to shoot and root in Arabidopsis thaliana. Npj Systems Biology and Applications, 5, 4.
    29. Maier, S., Lindner, J., & Francisco, J. (2019). Conceptual Framework for Biodiversity Assessments in Global Value Chains. Sustainability, 11(7), Article 7.
    30. Micadei, K., Peterson, J. P. S., Souza, A. M., Sarthour, R. S., Oliveira, I. S., Landi, G. T., Batalhão, T. B., Serra, R. M., & Lutz, E. (2019). Reversing the Direction of Heat Flow Using Quantum Correlations. Nature Communications, 10(1), Article 1.
    31. Müller, D., Dufaux, T., & Birke, K. P. (2019). Model-Based Investigation of Porosity Profiles in Graphite Anodes Regarding Sudden-Death and Second-Life of Lithium Ion Cells. Batteries, 5(2), Article 2.
    32. Nargesi, B. M., Sprenger, G. A., & Youn, J.-W. (2019). Metabolic engineering of Escherichia coli for para-amino-phenylethanol and para-amino-phenylacetic acid biosynthesis. Frontiers in Bioengineering and Biotechnology, 6, 201.
    33. Nieß, A., Siemann-Herzberg, M., & Takors, R. (2019). Protein production in Escherichia coli is guided by the trade-off between intracellular substrate availability and energy cost. Microbial Cell Factories, 18, 8.
    34. Oladyshkin, S., & Nowak, W. (2019). The Connection between Bayesian Inference and Information Theory for Model Selection, Information Gain and Experimental Design. Entropy, 21(11), Article 11.
    35. Olayioye, M. A., Noll, B., & Hausser, A. (2019). Spatiotemporal Control of Intracellular Membrane Trafficking by Rho GTPases. Cells, 8(12), Article 12.
    36. Padutsch, T., Sendetski, M., Huber, C., Peters, N., Pfizenmaier, K., Bethea, J. R., Kontermann, R. E., & Fischer, R. (2019). Superior Treg-Expanding Properties of a Novel Dual-Acting Cytokine Fusion Protein. Frontiers in Pharmacology, 10, 1490.
    37. Pfander, D., Daiß, G., & Pflüger, D. (2019). Heterogeneous Distributed Big Data Clustering on Sparse Grids. Algorithms, 12(3), Article 3.
    38. Pross, T., & Roßdeutscher, A. (2019). Towards a Correlation of Form, Use and Meaning of German Ge-prefixed Predicative Participles. Glossa : A Journal of General Linguistics, 4(1), Article 1.
    39. Putra, M. H., & Fyta, M. (2019). Probing DNA Nucleobases with Diamond (111) Surfaces. Journal of Physics Communications, 3(9), Article 9.
    40. Rex, J., Lutz, A., Faletti, L. E., Albrecht, U., Thomas, M., Bode, J. G., Borner, C., Sawodny, O., & Merfort, I. (2019). IL-1β and TNFα Differentially Influence NF-κB Activity and FasL-induced Apoptosis in Primary Murine Hepatocytes During LPS-Induced Inflammation. Frontiers in Physiology, 10, 117.
    41. Rott, E., Happel, O., Armbruster, D., & Minke, R. (2019). Behavior of PBTC, HEDP, and Aminophosphonates in the Process of Wastewater Treatment. Water, 12(1), Article 1.
    42. Röder, M., Günther, T., & Zimmermann, A. (2019). Review on Fabrication Technologies for Optical Mold Inserts. Micromachines, 10(4), Article 4.
    43. Schlegl, F., Honold, C., Leistner, S., Albrecht, S., Roth, D., Haase, W., Leistner, P., Binz, H., & Sobek, W. (2019). Integration of LCA in the Planning Phases of Adaptive Buildings. Sustainability, 11(16), Article 16.
    44. Schmid, M., Ludescher, D., & Giessen, H. (2019). Optical Properties of Photoresists for Femtosecond 3D Printing : Refractive Index, Extinction, Luminescence-Dose Dependence, Aging, Heat Treatment and Comparison Between 1-Photon and 2-Photon Exposure. Optical Materials Express, 9(12), Article 12.
    45. Schmitt, G., Birke, J., & Jendrossek, D. (2019). Towards the Understanding of the Enzymatic Cleavage of Polyisoprene by the Dihaem-Dioxygenase RoxA. AMB Express, 9(1), Article 1.
    46. Schuler, B., Kühner, L., Hentschel, M., Giessen, H., & Tarín, C. (2019). Adaptive Method for Quantitative Estimation of Glucose and Fructose Concentrations in Aqueous Solutions Based on Infrared Nanoantenna Optics. Sensors, 19(14), Article 14.
    47. Seidel, J., Trachte, K., Orellana-Alvear, J., Figueroa, R., Célleri, R., Bendix, J., Fernandez, C., & Huggel, C. (2019). Precipitation Characteristics at Two Locations in the Tropical Andes by Means of Vertically Pointing Micro-Rain Radar Observations. Remote Sensing, 11(24), Article 24.
    48. Soltani, M., Kulkarni, R., Scheinost, T., Grözinger, T., & Zimmermann, A. (2019). A Novel Approach for Reliability Investigation of LEDs on Molded Interconnect Devices Based on FE-Analysis Coupled to Injection Molding Simulation. IEEE Access, 7, 56163–56173.
    49. Sánchez-Moreno, I., Trachtmann, N., Ilhan, S., Hélaine, V., Lemaire, M., Guérard-Hélaine, C., & Sprenger, G. A. (2019). 2-Ketogluconate Kinase from Cupriavidus Necator H16 : Purification, Characterization, and Exploration of Its Substrate Specificity. Molecules, 24(13), Article 13.
    50. Thiele, S., Pruss, C., Herkommer, A. M., & Giessen, H. (2019). 3D Printed Stacked Diffractive Microlenses. Optics Express, 27(24), Article 24.
    51. Trück, J., Hadjixenophontos, E., Joshi, Y., Richter, G., Stender, P., & Schmitz, G. (2019). Ionic Conductivity of Melt-Frozen LiBH4 Films. RSC Advances, 9(66), Article 66.
    52. Uykur, E., Li, W., Kuntscher, C. A., & Dressel, M. (2019). Optical signatures of energy gap in correlated Dirac fermions. Npj Quantum Materials, 4, 19.
    53. Wehrmann, M., Berthelot, C., Billard, P., & Klebensberger, J. (2019). Rare Earth Element (REE)-Dependent Growth of Pseudomonas putida KT2440 Relies on the ABC-Transporter PedA1A2BC and Is Influenced by Iron Availability. Frontiers in Microbiology, 10, 2494.
    54. Würth, I., Valldecabres, L., Simon, E., Möhrlen, C., Uzunoğlu, B., Gilbert, C., Giebel, G., Schlipf, D., & Kaifel, A. (2019). Minute-Scale Forecasting of Wind Power : Results from the Collaborative Workshop of IEA Wind Task 32 and 36. Energies, 12(4), Article 4.
  6. 2018

    1. Albernaz, V. L., Bach, M., Weber, A., Southan, A., & Tovar, G. (2018). Active Ester Containing Surfmer for One-Stage Polymer Nanoparticle Surface Functionalization in Mini-Emulsion Polymerization. Polymers, 10(4), Article 4.
    2. Beirow, F., Eckerle, M., Dannecker, B., Dietrich, T., Abdou Ahmed, M., & Graf, T. (2018). Radially polarized passively mode-locked thin-disk laser oscillator emitting sub-picosecond pulses with an average output power exceeding the 100 W level. Optics Express, 26(4), Article 4.
    3. Berberich, J., Dietrich, J. W., Hörmann, R., & Müller, M. A. (2018). Mathematical Modeling of the Pituitary-Thyroid Feedback Loop: Role of a TSH-T-3-Shunt and Sensitivity Analysis. Frontiers in Endocrinology, 9, 91.
    4. Buchholz, P. C. F., Zeil, C., & Pleiss, J. (2018). The scale-free nature of protein sequence space. PLOS ONE, 13(8), Article 8.
    5. Clifton, A., Clive, P., Gottschall, J., Schlipf, D., Simley, E., Simmons, L., Stein, D., Trabucchi, D., Vasiljevic, N., & Würth, I. (2018). IEAWind Task 32: Wind Lidar Identifying and Mitigating Barriers to the Adoption of Wind Lidar. Remote Sensing, 10(3), Article 3.
    6. Cui, Y., Martin, U., & Liang, J. (2018). PULSim: User-Based Adaptable Simulation Tool for Railway Planning and Operations. Journal of Advanced Transportation, 2018, 7284815.
    7. Danish, L., Imig, D., Allgöwer, F., Scheurich, P., & Pollak, N. (2018). Bcl-2-mediated control of TRAIL-induced apoptotic response in the non-small lung cancer cell line NCI-H460 is effective at late caspase processing steps. PLOS ONE, 13(6), Article 6.
    8. Defrance, J., Schäferling, M., & Weiss, T. (2018). Modeling of second-harmonic generation in periodic nanostructures by the Fourier modal method with matched coordinates. Optics Express, 26(11), Article 11.
    9. Emperle, M., Dukatz, M., Kunert, S., Holzer, K., Rajavelu, A., Jurkowska, R. Z., & Jeltsch, A. (2018). The DNMT3A R882H mutation does not cause dominant negative effects in purified mixed DNMT3A/R882H complexes. Scientific Reports, 8, 13242.
    10. Faas, S., Foerster, D. J., Weber, R., & Graf, T. (2018). Determination of the thermally induced focal shift of processing optics for ultrafast lasers with average powers of up to 525 W. Optics Express, 26(20), Article 20.
    11. Failmezger, J., Scholz, S., Blombach, B., & Siemann-Herzberg, M. (2018). Cell-free protein synthesis from fast-growing vibrio natriegens. Frontiers in Microbiology, 9, 1146.
    12. Fischer, S. (2018). Locality, control, and non-adjoined islands. Glossa, 3(1), Article 1.
    13. Förster, D. J., Weber, R., Holder, D., & Graf, T. (2018). Estimation of the depth limit for percussion drilling with picosecond laser pulses. Optics Express, 26(9), Article 9.
    14. Graf, M., Zieringer, J., Haas, T., Nieß, A., Blombach, B., & Takors, R. (2018). Physiological Response of Corynebacterium glutamicum to Increasingly Nutrient-Rich Growth Conditions. Frontiers in Microbiology, 9, 2058.
    15. Götz, T., Schädel, N., Petri, N., Kirchhof, M., Bilitewski, U., Tovar, G. E. M., Laschat, S., & Southan, A. (2018). Triazole-based cross-linkers in radical polymerization processes: tuning mechanical properties of poly(acrylamide) and poly(N,N-dimethylacrylamide) hydrogels. RSC Advances, 8(60), Article 60.
    16. Güsewell, J., Härdtlein, M., & Eltrop, L. (2018). A plant‐specific model approach to assess effects of repowering measures on existing biogas plants : the case of Baden‐Wuerttemberg. GCB Bioenergy, 11(1), Article 1.
    17. Hepp, S., Bauer, S., Hornung, F., Schwartz, M., Portalupi, S. L., Jetter, M., & Michler, P. (2018). Bragg grating cavities embedded into nano-photonic waveguides for Purcell enhanced quantum dot emission. Optics Express, 26(23), Article 23.
    18. Hofsäß, M., Clifton, A., & Cheng, P. W. (2018). Reducing the Uncertainty of Lidar Measurements in Complex Terrain Using a Linear Model Approach. Remote Sensing, 10(9), Article 9.
    19. Huttunen-Lenz, M., Hansen, S., Christensen, P., Larsen, T. M., Sando-Pedersen, F., Drummen, M., Adam, T. C., Macdonald, I. A., Taylor, M. A., Alfredo Martinez, J., Navas-Carretero, S., Handjiev, S., Poppitt, S. D., Silvestre, M. P., Fogelholm, M., Pietilainen, K. H., Brand-Miller, J., Berendsen, A. A. M., Raben, A., & Schlicht, W. (2018). PREVIEW study-influence of a behavior modification intervention (PREMIT) in over 2300 people with pre-diabetes: intention, self-efficacy and outcome expectancies during the early phase of a lifestyle intervention. Psychology Research and Behavior Management, 11, 383–394.
    20. Jarwitz, M., Fetzer, F., Weber, R., & Graf, T. (2018). Weld seam geometry and electrical resistance of laser-welded, aluminum-copper dissimilar joints produced with spatial beam oscillation. Metals, 8(7), Article 7.
    21. Jeske, H. (2018). Barcoding of Plant Viruses with Circular Single-Stranded DNA Based on Rolling Circle Amplification. Viruses, 10(9), Article 9.
    22. Klein, A. C., Bartholomay, S., Marten, D., Lutz, T., Pechlivanoglou, G., Nayeri, C. N., Paschereit, C. O., & Krämer, E. (2018). About the suitability of different numerical methods to reproduce model wind turbine measurements in a wind tunnel with a high blockage ratio. Wind Energy Science, 3(1), Article 1.
    23. Klein, L., Gude, J., Wenz, F., Lutz, T., & Krämer, E. (2018). Advanced computational fluid dynamics (CFD)-multi-body simulation (MBS) coupling to assess low-frequency emissions from wind turbines. Wind Energy Science, 3(2), Article 2.
    24. Klenk, J. M., Dubiel, P., Sharma, M., Grogan, G., & Hauer, B. (2018). Characterization and structure-guided engineering of the novel versatile terpene monooxygenase CYP109Q5 from Chondromyces apiculatus DSM436. Microbial Biotechnology, 12(2), Article 2.
    25. Koch, T., Heck, K., Schröder, N., Class, H., & Helmig, R. (2018). A new simulation framework for soil-root interaction, evaporation, root growth, and solute transport. Vadose Zone Journal, 17(1), Article 1.
    26. Konzelmann, A., Charaya, H., Gompf, B., Dressel, M., & Berrier, A. (2018). Tuning the second harmonic generation of self-generated metallic islands. AIP Advances, 8(7), Article 7.
    27. Kropp, T., Schubert, M., & Werner, J. H. (2018). Quantitative Prediction of Power Loss for Damaged Photovoltaic Modules Using Electroluminescence. Energies, 11(5), Article 5.
    28. Krüger, E. (2018). Constraining Forces Stabilizing Superconductivity in Bismuth. Symmetry, 10(2), Article 2.
    29. Krüger, E. (2018). k-Space Magnetism as the Origin of Superconductivity. Symmetry, 10(7), Article 7.
    30. Lange, J., Müller, F., Takors, R., & Blombach, B. (2018). Harnessing novel chromosomal integration loci to utilize an organosolv-derived hemicellulose fraction forisobutanol production with engineered Corynebacterium glutamicum. Microbial Biotechnology, 11(1), Article 1.
    31. Lange, J., Münch, E., Müller, J., Busche, T., Kalinowski, J., Takors, R., & Blombach, B. (2018). Deciphering the Adaptation of Corynebacterium glutamicum in Transition from Aerobiosis via Microaerobiosis to Anaerobiosis. Genes, 9(6), Article 6.
    32. Li, H., Fu, L., Frenner, K., & Osten, W. (2018). Cascaded DBR plasmonic cavity lens for far-field subwavelength imaging at a visible wavelength. Optics Express, 26(15), Article 15.
    33. Li, H., Fu, L., Frenner, K., & Osten, W. (2018). Cascaded plasmonic superlens for far-field imaging with magnification at visible wavelength. Optics Express, 26(8), Article 8.
    34. Linnenbank, H., Saliba, M., Gui, L., Metzger, B., Tikhodeev, S. G., Kadro, J., Nasti, G., Abate, A., Hagfeldt, A., Graetzel, M., & Giessen, H. (2018). Temperature dependent two-photon photoluminescence of CH3NH3PbBr3: structural phase and exciton to free carrier transition. Optical Materials Express, 8(3), Article 3.
    35. Lozanovski, A., Whitehouse, N., Ko, N., & Whitehouse, S. (2018). Sustainability Assessment of Fuel Cell Buses in Public Transport. Sustainability, 10(5), Article 5.
    36. Mueller, K., & Cheng, P. W. (2018). Application of a Monte Carlo procedure for probabilistic fatigue design of floating offshore wind turbines. Wind Energy Science, 3(1), Article 1.
    37. Nargesi, B. M., Trachtmann, N., Sprenger, G. A., & Youn, J.-W. (2018). Production of p-amino-L-phenylalanine (L-PAPA) from glycerol by metabolic grafting of Escherichia coli. Microbial Cell Factories, 17, 149.
    38. Pustogow, A., McLeod, A. S., Saito, Y., Basov, D. N., & Dressel, M. (2018). Internal Strain Tunes Electronic Correlations on the Nanoscale. Science Advances, 4(12), Article 12.
    39. Rajavelu, A., Lungu, C., Emperle, M., Dukatz, M., Bröhm, A., Broche, J., Hanelt, I., Parsa, E., Schiffers, S., Karnik, R., Meissner, A., Carell, T., Rathert, P., Jurkowska, R. Z., & Jeltsch, A. (2018). Chromatin-dependent allosteric regulation of DNMT3A activity by MeCP2. Nucleic Acids Research, 46(17), Article 17.
    40. Rawluszko-Wieczorek, A. A., Knodel, F., Tamas, R., Dhayalan, A., & Jeltsch, A. (2018). Identification of protein lysine methylation readers with a yeast three-hybrid approach. Epigenetics & Chromatin, 11, 4.
    41. Renz, T., Leistner, P., & Liebl, A. (2018). Auditory Distraction by Speech : Comparison of Fluctuating and Steady Speech-Like Masking Sounds. Journal of the Acoustical Society of America, 144(2), Article 2.
    42. Rezai, M., Wrachtrup, J., & Gerhardt, I. (2018). Coherence Properties of Molecular Single Photons for Quantum Networks. Physical Review X, 8(3), Article 3.
    43. Ritter, R., Gruhler, N., Dobbertin, H., Kübler, H., Scheel, S., Pernice, W., Pfau, T., & Löw, R. (2018). Coupling Thermal Atomic Vapor to Slot Waveguides. Physical Review. X, 8(2), Article 2.
    44. Rott, E., Kuch, B., Lange, C., Richter, P., Kugele, A., & Minke, R. (2018). Removal of Emerging Contaminants and Estrogenic Activity from Wastewater Treatment Plant Effluent with UV/Chlorine and UV/H2O2 Advanced Oxidation Treatment at Pilot Scale. International Journal of Environmental Research and Public Health, 15(5), Article 5.
    45. Rott, E., Kuch, B., Lange, C., Richter, P., & Minke, R. (2018). Influence of Ammonium ions, organic load and flow rate on the UV/chlorine AOP applied to effluent of a wastewater treatment plant at pilot scale. International Journal of Environmental Research and Public Health, 15(6), Article 6.
    46. Röder, M., Drexler, M., Rothermel, T., Meissner, T., Günther, T., & Zimmermann, A. (2018). Injection Compression Molded Microlens Arrays for Hyperspectral Imaging. Micromachines, 9(7), Article 7.
    47. Schmidt, H., Thom, M., Wieprecht, S., Manz, W., & Gerbersdorf, S. U. (2018). The effect of light intensity and shear stress on microbial biostabilization and the community composition of natural biofilms. Research and Reports in Biology, 9, 1–16.
    48. Schott, N., & Klotzbier, T. J. (2018). Profiles of Cognitive-Motor Interference During Walking in Children : Does the Motor or the Cognitive Task Matter? Frontiers in Psychology, 9, 947.
    49. Shaw, S., & Ghosh, R. (2018). A modified Kulka micromethod for the rapid and safe analysis of fructose and 1-deoxy-D-xylulose-5-phosphate. Metabolites, 8(4), Article 4.
    50. Siebert, T., Eb, M., Ryan, D. S., Wakeling, J. M., & Stutzig, N. (2018). Impact of Multidirectional Transverse Calf Muscle Loading on Calf Muscle Force in Young Adults. Frontiers in Physiology, 9, 1148.
    51. Singer, J. P., Sämann, C., Gössl, T., & Birke, K. P. (2018). Pressure Monitoring Cell for Constrained Battery Electrodes. Sensors, 18(11), Article 11.
    52. Suissa, D., Günther, M., Shapiro, A., Melzer, I., & Schmitt, S. (2018). On Laterally Perturbed Human Stance : Experiment, Model, and Control. Applied Bionics and Biomechanics, 2018, 4767624.
    53. Wang, M., Gompf, B., Dressel, M., Destouches, N., & Berrier, A. (2018). Pure Circular Dichroism by Curved Rows of Plasmonic Nanoparticles. Optical Materials Express, 8(6), Article 6.
    54. Wasielewski, S., Rott, E., Minke, R., & Steinmetz, H. (2018). Evaluation of Different Clinoptilolite Zeolites as Adsorbent for Ammonium Removal from Highly Concentrated Synthetic Wastewater. Water, 10(5), Article 5.
    55. Wehrmann, M., Berthelot, C., Billard, P., & Klebensberger, J. (2018). The PedS2/PedR2 two-component system is crucial for the rare earth element switch in Pseudomonas putida KT2440. MSphere, 3(4), Article 4.
    56. Wehrmann, M., & Klebensberger, J. (2018). Engineering Thermal Stability and Solvent Tolerance of the Soluble Quinoprotein PedE from Pseudomonas Putida KT2440 with a Heterologous Whole-Cell Screening Approach. Microbial Biotechnology, 11(2), Article 2.
    57. Weihing, P., Wegmann, T., Lutz, T., Krämer, E., Kühn, T., & Altmikus, A. (2018). Numerical analyses and optimizations on the flow in the nacelle region of a wind turbine. Wind Energy Science, 3(2), Article 2.
    58. Weiß, I. M., Muth, C., Drumm, R., & Kirchner, H. O. K. (2018). Thermal Decomposition of the Amino Acids Glycine, Cysteine, Aspartic Acid, Asparagine, Glutamic Acid, Glutamine, Arginine and Histidine. BMC Biophysics, 11, 2.
    59. Zieringer, J., & Takors, R. (2018). In Silico Prediction of Large-Scale Microbial Production Performance : Constraints for Getting Proper Data-Driven Models. Computational and Structural Biotechnology Journal, 16, 246–256.
  7. 2017

    1. Albin, T., Koschny, D., Molau, S., Srama, R., & Poppe, B. (2017). Analysis of the technical biases of meteor video cameras used in the CILBO system. Geoscientific Instrumentation Methods and Data Systems, 6(1), Article 1.
    2. Briem, J., Mader, M., Reiter, D., Amirpour, R., Grözing, M., & Berroth, M. (2017). Fully Integrated High Quality Factor GmC Bandpass Filter Stage with Highly Linear Operational Transconductance Amplifier. Advances in Radio Science, 15, 149–155.
    3. Brown, N., Bubeck, D., Häufle, D. F. B., Weickenmeier, J., Kuhl, E., Alt, W., & Schmitt, S. (2017). Weekly Time Course of Neuro-Muscular Adaptation to Intensive Strength Training. Frontiers in Physiology, 8, 329.
    4. Buchholz, P. C. F., Fademrecht, S., & Pleiss, J. (2017). Percolation in protein sequence space. PLOS ONE, 12(12), Article 12.
    5. Christensen, K. B., Günther, M., Schmitt, S., & Siebert, T. (2017). Strain in shock-loaded skeletal muscle and the time scale of muscular wobbling mass dynamics. Scientific Reports, 7, 13266.
    6. Dietrich, T., Piehler, S., Rumpel, M., Villeval, P., Lupinski, D., Abdou Ahmed, M., & Graf, T. (2017). Highly-efficient continuous-wave intra-cavity frequency-doubled Yb:LuAG thin-disk laser with 1 kW of output power. Optics Express, 25(5), Article 5.
    7. Failmezger, J., Rauter, M., Nitschel, R., Kraml, M., & Siemann-Herzberg, M. (2017). Cell-free protein synthesis from non-growing, stressed Escherichia coli. Scientific Reports, 7, 16524.
    8. Floess, D., Hentschel, M., Weiss, T., Habermeier, H.-U., Jiao, J., Tikhodeev, S. G., & Giessen, H. (2017). Plasmonic Analog of Electromagnetically Induced Absorption Leads to Giant Thin Film Faraday Rotation of 14 degrees. Physical Review. X, Expanding Access, 7(2), Article 2.
    9. Frank, B., Kahl, P., Podbiel, D., Spektor, G., Orenstein, M., Fu, L., Weiss, T., Horn-von Hoegen, M., Davis, T. J., zu Heringdorf, F.-J. M., & Gießen, H. (2017). Short-range surface plasmonics: Localized electron emission dynamics from a 60-nm spot on an atomically flat single-crystalline gold surface. Science Advances, 3(7), Article 7.
    10. Gissibl, T., Wagner, S., Sykora, J., Schmid, M., & Gießen, H. (2017). Refractive index measurements of photo-resists for three-dimensional direct laser writing. Optical Materials Express, 7(7), Article 7.
    11. Hoppe, N., Rothe, C., Celik, A., Rosa, M. F., Vogel, W., Widmann, D., Rathgeber, L., Delgado, M. C. R., Belén, V., Ludwigs, S., & Berroth, M. (2017). Single Waveguide Silicon-Organic Hybrid Modulator. Advances in Radio Science, 15, 141–147.
    12. Hoppe, N., Scheck, P., Sweidan, R., Diersing, P., Rathgeber, L., Vogel, W., Riegger, B., Southan, A., & Berroth, M. (2017). Silicon Integrated Dual-Mode Interferometer with Differential Outputs. Biosensors, 7(3), Article 3.
    13. Jensch, A., Thomaseth, C., & Radde, N. E. (2017). Sampling-based Bayesian approaches reveal the importance of quasi-bistable behavior in cellular decision processes on the example of the MAPK signaling pathway in PC-12 cell lines. BMC Systems Biology, 11, 11.
    14. Jurkowska, R. Z., Qin, S., Kungulovski, G., Tempel, W., Liu, Y., Bashtrykov, P., Stiefelmaier, J., Jurkowski, T. P., Kudithipudi, S., Weirich, S., Tamas, R., Wu, H., Dombrovski, L., Loppnau, P., Reinhardt, R., Min, J., & Jeltsch, A. (2017). H3K14ac is linked to methylation of H3K9 by the triple Tudor domain of SETDB1. Nature Communications, 8, 2057.
    15. Kleinbach, C., Martynenko, O., Promies, J., Haeufle, D. F. B., Fehr, J., & Schmitt, S. (2017). Implementation and validation of the extended Hill-type muscle model with robust routing capabilities in LS-DYNA for active human body models. Biomedical Engineering Online, 16, 109.
    16. Kleinknecht, S. M., Class, H., & Braun, J. (2017). Experimental study on retardation of a heavy NAPL vapor in partially saturated porous media. Hydrology and Earth System Sciences, 21(3), Article 3.
    17. Klotzbier, T. J., & Schott, N. (2017). Cognitive-Motor Interference during Walking in Older Adults with Probable Mild Cognitive Impairment. Frontiers in Aging Neuroscience, 9, 350.
    18. Knöller, A., Lampa, C. P., von Cube, F., Zeng, T. H., Bell, D. C., Dresselhaus, M. S., Burghard, Z., & Bill, J. (2017). Strengthening of Ceramic-based Artificial Nacre via Synergistic Interactions of 1D Vanadium Pentoxide and 2D Graphene Oxide Building Blocks. Scientific Reports, 7, 40999.
    19. Knöller, A., Runcevski, T., Dinnebier, R. E., Bill, J., & Burghard, Z. (2017). Cuttlebone-like V2O5 Nanofibre Scaffolds - Advances in Structuring Cellular Solids. Scientific Reports, 7, 42951.
    20. Krüger, E. (2017). Constraining Forces Causing the Meissner Effect. Journal of Modern Physics, 8(8), Article 8.
    21. Lange, J., Müller, F., Bernecker, K., Dahmen, N., Takors, R., & Blombach, B. (2017). Valorization of pyrolysis water: a biorefinery side stream, for 1,2-propanediol production with engineered Corynebacterium glutamicum. Biotechnology for Biofuels, 10, 277.
    22. Lill, P. C., Dahlinger, M., & Köhler, J. R. (2017). Boron Partitioning Coefficient above Unity in Laser Crystallized Silicon. Materials, 10(2), Article 2.
    23. Lungu, C., Pinter, S., Broche, J., Rathert, P., & Jeltsch, A. (2017). Modular fluorescence complementation sensors for live cell detection of epigenetic signals at endogenous genomic sites. Nature Communications, 8, 649.
    24. Maier, J. A. H., Möhrle, R., & Jeltsch, A. (2017). Design of synthetic epigenetic circuits featuring memory effects and reversible switching based on DNA methylation. Nature Communications, 8, 15336.
    25. Mauser, R., Kungulovski, G., Keup, C., Reinhardt, R., & Jeltsch, A. (2017). Application of dual reading domains as novel reagents in chromatin biology reveals a new H3K9me3 and H3K36me2/3 bivalent chromatin state. Epigenetics & Chromatin, 10, 45.
    26. Mosthaf, T., & Bárdossy, A. (2017). Regionalizing nonparametric models of precipitation amounts on different temporal scales. Hydrology and Earth System Sciences, 21(5), Article 5.
    27. Mörz, F., Semenyshyn, R., Steinle, T., Neubrech, F., Zschieschang, U., Klauk, H., Steinmann, A., & Gießen, H. (2017). Nearly diffraction limited FTIR mapping using an ultrastable broadband femtosecond laser tunable from 1.33 to 8 mu m. Optics Express, 25(26), Article 26.
    28. Nieß, A., Löffler, M., Simen, J. D., & Takors, R. (2017). Repetetive Short-Term Stimuli Imposed in Poor Mixing Zones Induce Long-Term Adaptation of E. Coli Cultures in Large-Scale Bioreactors : Experimental Evidence and Mathematical Model. Frontiers in Microbiology, 8, 1195.
    29. Park, S., Du, X.-Q., Grözing, M., & Berroth, M. (2017). Design of a 0.13 µm SiGe Limiting Amplifier with 14.6 THz Gain-Bandwidth-Product. Advances in Radio Science, 15, 115–121.
    30. Piehler, S., Dietrich, T., Wittmüss, P., Sawodny, O., Ahmed, M. A., & Graf, T. (2017). Deformable mirrors for intra-cavity use in high-power thin-disk lasers. Optics Express, 25(4), Article 4.
    31. Raach, S., Schlipf, D., & Cheng, P.-W. (2017). Lidar-Based Wake Tracking for Closed-Loop Wind Farm Control. Wind Energy Science, 2(1), Article 1.
    32. Rosa, M. F., Rathgeber, L., Elster, R., Hoppe, N., Föhn, T., Schmidt, M., Vogel, W., & Berroth, M. (2017). Design of a Carrier-Depletion Mach-Zehnder Modulator in 250 nm Silicon-On-Insulator Technology. Advances in Radio Science, 15, 269–281.
    33. Rott, E., Pittmann, T., Wasielewski, S., Kugele, A., & Minke, R. (2017). Detoxification of Pesticide-Containing Wastewater with FeIII, Activated Carbon and Fenton Reagent and Its Control Using Three Standardized Bacterial Inhibition Tests. Water, 9(12), Article 12.
    34. Sartison, M., Portalupi, S. L., Gissibl, T., Jetter, M., Gießen, H., & Michler, P. (2017). Combining in-situ lithography with 3D printed solid immersion lenses for single quantum dot spectroscopy. Scientific Reports, 7, 39916.
    35. Simen, J. D., Löffler, M., Jäger, G., Schäferhoff, K., Freund, A., Matthes, J., Müller, J., Takors, R., & RecogNice‐Team. (2017). Transcriptional response of Escherichia coli to ammonia and glucose fluctuations. Microbial Biotechnology, 10(4), Article 4.
    36. Singh, A. K., Naik, D. N., Pedrini, G., Takeda, M., & Osten, W. (2017). Exploiting Scattering Media for Exploring 3-D Objects. Light : Science & Applications, 6, e16219.
    37. Singh, A. K., Pedrini, G., Takeda, M., & Osten, W. (2017). Scatter-plate microscope for lensless microscopy with diffraction limited resolution. Scientific Reports, 7, 10687.
    38. Steinle, T., Greiner, J. N., Wrachtrup, J., Gießen, H., & Gerhardt, I. (2017). Unbiased All-Optical Random-Number Generator. Physical Review. X, Expanding Access, 7(4), Article 4.
    39. Stepper, P., Kungulovski, G., Jurkowska, R. Z., Chandra, T., Krueger, F., Reinhardt, R., Reik, W., Jeltsch, A., & Jurkowski, T. P. (2017). Efficient targeted DNA methylation with chimeric dCas9-Dnmt3a-Dnmt3L methyltransferase. Nucleic Acids Research, 45(4), Article 4.
    40. Striebel, M., Wrachtrup, J., & Gerhardt, I. (2017). Absorption and Extinction Cross Sections and Photon Streamlines in the Optical Near-field. Scientific Reports, 7, 15420.
    41. Thiele, S., Arzenbacher, K., Gissibl, T., Gießen, H., & Herkommer, A. M. (2017). 3D-printed eagle eye: Compound microlens system for foveated imaging. Science Advances, 3(2), Article 2.
    42. Vinnik, D. A., Tarasova, A. Yu., Zherebtsov, D. A., Gudkova, S. A., Galimov, D. M., Zhivulin, V. E., Trofimov, E. A., Nemrava, S., Perov, N. S., Isaenko, L. I., & Niewa, R. (2017). Magnetic and Structural Properties of Barium Hexaferrite BaFe12O19 from Various Growth Techniques. Materials, 10(6), Article 6.
    43. von Wulffen, J., Ulmer, A., Jäger, G., Sawodny, O., & Feuer, R. (2017). Rapid Sampling of Escherichia coli After Changing Oxygen Conditions Reveals Transcriptional Dynamics. Genes, 8(3), Article 3.
    44. Wang, M., Löhle, A., Gompf, B., Dressel, M., & Berrier, A. (2017). Physical interpretation of Mueller matrix spectra: a versatile method applied to gold gratings. Optics Express, 25(6), Article 6.
    45. Weber, K., Hütt, F., Thiele, S., Gissibl, T., Herkommer, A., & Gießen, H. (2017). Single mode fiber based delivery of OAM light by 3D direct laser writing. Optics Express, 25(17), Article 17.
    46. Weber, R., Graf, T., Freitag, C., Feuer, A., Kononenko, T., & Konov, V. I. (2017). Processing constraints resulting from heat accumulation during pulsed and repetitive laser materials processing. Optics Express, 25(4), Article 4.
    47. Wehrmann, M., Billard, P., Martin-Meriadec, A., Zegeye, A., & Klebensberger, J. (2017). Functional Role of Lanthanides in Enzymatic Activity and Transcriptional Regulation of Pyrroloquinoline Quinone-Dependent Alcohol Dehydrogenases in Pseudomonas putida KT2440. MBio, 8(3), Article 3.
    48. Weirich, S., Kudithipudi, S., & Jeltsch, A. (2017). Somatic cancer mutations in the MLL1 histone methyltransferase modulate its enzymatic activity and dependence on the WDR5/RBBP5/ASH2L complex. Molecular Oncology, 11(4), Article 4.
  8. 2016

    1. Ackermann, T., Neuhaus, R., & Roth, S. (2016). The effect of rod orientation on electrical anisotropy in silver nanowire networks for ultra-transparent electrodes. Scientific Reports, 6, 34289.
    2. Bardossy, A., Huang, Y., & Wagener, T. (2016). Simultaneous calibration of hydrological models in geographical space. Hydrology and Earth System Sciences, 20(7), Article 7.
    3. Chen, B., & Herkommer, A. M. (2016). Generalized Aldis theorem for calculating aberration contributions in freeform systems. Optics Express, 24(23), Article 23.
    4. Colley, B., Dederer, V., Carnell, M., Kjelleberg, S., Rice, S. A., & Klebensberger, J. (2016). SiaA/D Interconnects c-di-GMP and RsmA Signaling to Coordinate Cellular Aggregation of Pseudomonas aeruginosa in Response to Environmental Conditions. Frontiers in Microbiology, 7, 179.
    5. Failmezger, J., Nitschel, R., Sánchez-Kopper, A., Kraml, M., & Siemann-Herzberg, M. (2016). Site-Specific Cleavage of Ribosomal RNA in Escherichia Coli-Based Cell-Free Protein Synthesis Systems. PLOS ONE, 11(12), Article 12.
    6. Fu, L., Berrier, A., Li, H., Schau, P., Frenner, K., Dressel, M., & Osten, W. (2016). Depolarization of a Randomly Distributed Plasmonic Meander Metasurface Characterized by Mueller Matrix Spectroscopic Ellipsometry. Optics Express, 24(24), Article 24.
    7. Gissibl, T., Schmid, M., & Gießen, H. (2016). Spatial beam intensity shaping using phase masks on single-mode optical fibers fabricated by femtosecond direct laser writing. Optica, 3(4), Article 4.
    8. Gissibl, T., Thiele, S., Herkommer, A., & Giessen, H. (2016). Sub-micrometre accurate free-form optics by three-dimensional printing on single-mode fibres. Nature Communications, 7, 11763.
    9. Hargart, F., Roy-Choudhury, K., John, T., Portalupi, S. L., Schneider, C., Höfling, S., Kamp, M., Hughes, S., & Michler, P. (2016). Probing Different Regimes of Strong Field Light-Matter Interaction with Semiconductor Quantum Dots and Few Cavity Photons. New Journal of Physics, 18, 123031.
    10. Kahle, H., Mateo, C. M. N., Brauch, U., Tatar-Mathes, P., Bek, R., Jetter, M., Graf, T., & Michler, P. (2016). Semiconductor membrane external-cavity surface-emitting laser (MECSEL). Optica, 3(12), Article 12.
    11. Kahlert, D., Unyi-Reicherz, A., Stratton, G., Larsen, T. M., Fogelholm, M., Raben, A., & Schlicht, W. (2016). PREVIEW Behavior Modification Intervention Toolbox (PREMIT): A Study Protocol for a Psychological Element of a Multicenter Project. Frontiers in Psychology, 7, 1136.
    12. Kedenburg, S., Steinle, T., Mörz, F., Steinmann, A., Nguyen, D. T., Rhonehouse, D., Zong, J., Chavez-Pirson, A., & Gießen, H. (2016). Solitonic supercontinuum of femtosecond mid-IR pulses in W-type index tellurite fibers with two zero dispersion wavelengths. APL Photonics, 1, 086101; 1–10.
    13. Klünder, M., Sawodny, O., Amend, B., Ederer, M., Kelp, A., Sievert, K.-D., Stenzl, A., & Feuer, R. (2016). Signal processing in urodynamics: towards high definition urethral pressure profilometry. Biomedical Engineering Online, 15, 31.
    14. Krauth, J., Steinle, T., Liu, B., Flöß, M., Linnenbank, H., Steinmann, A., & Gießen, H. (2016). Low drift cw-seeded high-repetition-rate optical parametric amplifier for fingerprint coherent Raman spectroscopy. Optics Express, 24(19), Article 19.
    15. Krüger, E. (2016). Structural Distortion Stabilizing the Antiferromagnetic and Semiconducting Ground State of BaMn2As2. Symmetry, 8(10), Article 10.
    16. Kungulovski, G., Mauser, R., Reinhardt, R., & Jeltsch, A. (2016). Application of recombinant TAF3 PHD domain instead of anti-H3K4me3 antibody. Epigenetics & Chromatin, 9, 11.
    17. Linnenbank, H., Steinle, T., & Gießen, H. (2016). Narrowband cw injection seeded high power femtosecond double-pass optical parametric generator at 43 MHz: Gain and noise dynamics. Optics Express, 24(17), Article 17.
    18. Meinert, I., Brown, N., & Alt, W. (2016). Effect of Footwear Modifications on Oscillations at the Achilles Tendon during Running on a Treadmill and Over Ground: A Cross-Sectional Study. PLOS ONE, 11(3), Article 3.
    19. Radde, N. E., & Hütt, M.-T. (2016). The Physics behind Systems Biology. EPJ Nonlinear Biomedical Physics, 4, 7.
    20. Röhrle, O., Neumann, V., & Heidlauf, T. (2016). The Role of Parvalbumin, Sarcoplasmatic Reticulum Calcium Pump Rate, Rates of Cross-Bridge Dynamics, and Ryanodine Receptor Calcium Current on Peripheral Muscle Fatigue: A Simulation Study. Computational and Mathematical Methods in Medicine, 2016, 3180205.
    21. Sanchez-Kopper, A., Becker, M., Pfizenmaier, J., Kessler, C., Karau, A., & Takors, R. (2016). Tracking dipeptides at work-uptake and intracellular fate in CHO culture. AMB Express, 6, 48.
    22. Seidel, J., Ketzler, G., Bechtel, B., Thies, B., Philipp, A., Böhner, J., Egli, S., Eisele, M., Herma, F., Langkamp, T., Petersen, E., Sachsen, T., Schlabing, D., & Schneider, C. (2016). Mobile measurement techniques for local and micro-scale studies in urban and topo-climatology. Die Erde, 147(1), Article 1.
    23. Steinle, T., Kumar, V., Floess, M., Steinmann, A., Marangoni, M., Koch, C., Wege, C., Cerullo, G., & Gießen, H. (2016). Synchronization-free all-solid-state laser system for stimulated Raman scattering microscopy. Light : Science & Applications, 5, e16149.
    24. Stitz, N., Eiben, S., Atanasova, P., Domingo, N., Leineweber, A., Burghard, Z., & Bill, J. (2016). Piezoelectric Templates - New Views on Biomineralization and Biomimetics. Scientific Reports, 6, 26518.
    25. Strobel, M., Eggenberger, M., & Radetzki, M. (2016). Low Power Memory Allocation and Mapping for Area-Constrained Systems-on-Chips. EURASIP Journal on Embedded Systems, 2017, 2.
    26. Sämann, C., Köhler, J. R., Dahlinger, M., Schubert, M. B., & Werner, J. H. (2016). Pulsed Laser Porosification of Silicon Thin Films. Materials, 9(7), Article 7.
    27. Tiritiris, I., & Schleid, T. (2016). Caesium Tetramethylammonium Dodecahydrido-Closo-Dodecaborate Monohydrate. IUCrData, 1, x160291.
    28. von Wulffen, J., RecogNice-Team, Sawodny, O., & Feuer, R. (2016). Transition of an Anaerobic Escherichia coli Culture to Aerobiosis: Balancing mRNA and Protein Levels in a Demand-Directed Dynamic Flux Balance Analysis. PLOS ONE, 11(7), Article 7.
    29. Wagenpfeil, J., Schöllig, C., Mayer, V., Feuer, R., Nold, B., Neugebauer, A., Ederer, M., Rothmund, R., Krämer, B., Brucker, S., Enderle, M., Sawodny, O., & Rex, J. (2016). In silico evaluation of geometry variations with respect to the thermal spread during coagulation of egg white using bipolar vessel sealing instruments. Biomedical Engineering Online, 15, 117.
    30. Wagner, S., Abdulkhaleq, A., Bogicevic, I., Ostberg, J.-P., & Ramadani, J. (2016). How are Functionally Similar Code Clones Syntactically Different? : an Empirical Study and a Benchmark. PeerJ Computer Science, 2, 1–26.
    31. Watcharakul, S., Röther, W., Birke, J., Umsakul, K., Hodgson, B., & Jendrossek, D. (2016). Biochemical and spectroscopic characterization of purified Latex Clearing Protein (Lcp) from newly isolated rubber degrading Rhodococcus rhodochrous strain RPK1 reveals novel properties of Lcp. BMC Microbiology, 16, 92.
  9. 2015

    1. Bagheri, S., Zgrabik, C. M., Gissibl, T., Tittl, A., Sterl, F., Walter, R., De Zuani, S., Berrier, A., Stauden, T., Richter, G., Hu, E. L., & Gießen, H. (2015). Large-area fabrication of TiN nanoantenna arrays for refractory plasmonics in the mid-infrared by femtosecond direct laser writing and interference lithography. Optical Materials Express, 5(11), Article 11.
    2. Bischoff, A., Bayerlova, M., Strotbek, M., Schmid, S., Beissbarth, T., & Olayioye, M. A. (2015). A global microRNA screen identifies regulators of the ErbB receptor signaling network. Cell Communication and Signaling, 13, 5.
    3. Blombach, B., & Takors, R. (2015). CO2 - Intrinsic Product, Essential Substrate, and Regulatory Trigger of Microbial and Mammalian Production Processes. Frontiers in Bioengineering and Biotechnology, 3, 108.