Articles already funded

Aghaei Hakkak, R., Tiritiris, I., & Schleid, T. (2024). Synthesis and Characterization of High-Energy Anti-Perovskite Compounds Cs3XB12H12 Based on Cesium Dodecahydro-Closo-Borate with Molecular Oxoanions (X− = NO3−, ClO3− and ClO4−). Molecules, 29(2), Article 2. https://doi.org/10.3390/molecules29020382

Andresen, M., Krautter, B., Pagel, J., & Reiter, N. (2024). Knowledge Distribution in German Drama. Journal of Open Humanities Data, 10(6), Article 6. https://doi.org/10.5334/johd.167

Bashir, D., Boubekraoui, A., Mourkioti, G., Li, F., Karvinen, P., Kuittinen, M., Mackenzie, Jacob. I., Graf, T., & Abdou Ahmed, M. (2024). Sapphire-based resonant waveguide-grating mirrors : advancing their intra-cavity power density capability. Applied Physics. B, Lasers and Optics, 130(4), Article 4. https://doi.org/10.1007/s00340-023-08144-2

Bens, T., Walter, R., Beerhues, J., Lücke, C., Gabler, J., & Sarkar, B. (2024). Isolation, Characterization and Reactivity of Key Intermediates Relevant to Reductive (Electro)catalysis with CpRh Complexes Containing Pyridyl-MIC (MIC=Mesoionic Carbene) Ligands. Chemistry - a European Journal, 30(3), Article 3. https://doi.org/10.1002/chem.202302354

Brandl, L., Reuß, H.-C., & Heidle, D. (2024). Approach to Design of Piezoelectric Energy Harvester for Sensors on Electric Machine Rotors. Energies, 17(8), Article 8. https://doi.org/10.3390/en17081884

Doshi, S., Ludescher, D., Karst, J., Flöß, M., Carlström, J., Li, B., Hemed, N. M., Duh, Y.-S., Melosh, N. A., Hentschel, M., Brongersma, M., & Giessen, H. (2024). Direct electron beam patterning of electro-optically active PEDOT:PSS. Nanophotonics, 1–10. https://doi.org/10.1515/nanoph-2023-0640

Geng, S., Dorling, K. C., Prenzel, T. M., & Albrecht, S. (2024). Grill and Chill : A Comprehensive Analysis of the Environmental Impacts of Private Household Barbecuing in Germany. Sustainability, 16(3), Article 3. https://doi.org/10.3390/su16031041

Göbel, R., Schwertel, S., Weihe, S., & Werz, M. (2024). Investigation of Tool Degradation during Friction Stir Welding of Hybrid Aluminum-Steel Sheets in a Combined Butt and Overlap Joint. Materials, 17(4), Article 4. https://doi.org/10.3390/ma17040874

Harting, C., Teleki, A., Braakmann, M., Jankowitsch, F., & Takors, R. (2024). Systemic intracellular analysis for balancing complex biosynthesis in a transcriptionally deregulated Escherichia coli l-Methionine producer. Microbial Biotechnology, 17(3), Article 3. https://doi.org/10.1111/1751-7915.14433

Kuhlmann, U., Hoffmann, D., Schorr, J., Kantar, M., & Völlner, J. (2024). Composite girders with short headed studs in grouted joints of precast concrete elements : Numerical investigations and design recommendations. Steel Construction. https://doi.org/10.1002/stco.202300008

Latsuzbaya, T., Middendorf, P., Voelkle, D., & Weber, C. (2024). Thermomechanical Analysis of Thermoplastic Mono-Material Sandwich Structures with Honeycomb Core. Journal of Composites Science, 8(1), Article 1. https://doi.org/10.3390/jcs8010018

Leder, S., & Menges, A. (2024). Merging architectural design and robotic planning using interactive agent-based modelling for collective robotic construction. Journal of Computational Design and Engineering, 11(2), Article 2. https://doi.org/10.1093/jcde/qwae028

Makki, N., Lang, N., & Büchler, H. P. (2024). Absorbing state phase transition with Clifford circuits. Physical Review Research, 6(1), Article 1. https://doi.org/10.1103/PhysRevResearch.6.013278

Mandl, A., Barzen, J., Bechtold, M., Leymann, F., & Wild, K. (2024). Amplitude amplification-inspired QAOA: improving the success probability for solving 3SAT. Quantum Science and Technology, 9(1), Article 1. https://doi.org/10.1088/2058-9565/ad141d

Micadei, K., Landi, G. T., & Lutz, E. (2024). Extracting Bayesian networks from multiple copies of a quantum system. Epl, 144(6), Article 6. https://doi.org/10.1209/0295-5075/ad177d

Miranda-Quintana, R. A., Chen, L., & Smiatek, J. (2024). Insights into Hildebrand Solubility Parameters : Contributions from Cohesive Energies or Electrophilicity Densities? ChemPhysChem, 25(1), Article 1. https://doi.org/10.1002/cphc.202300566

Roduner, E., & Rohwer, E. R. (2024). Preserving Cultural Diversity in Rural Africa Using Renewable Energy. Global Challenges, 8(1), Article 1. https://doi.org/10.1002/gch2.202300263

Stock, A., Stock, O., Mönch, J., Suren, M., Koch, N. N., Rey, G. D., & Wirzberger, M. (2024). BeeLife: a mobile application to foster environmental awareness in classroom settings. Frontiers in Computer Science, 5, 1–14. https://doi.org/10.3389/fcomp.2023.1298888

Wang, R., Marut, G., Hadas, T., & Hobiger, T. (2024). Improving GNSS Meteorology by Fusing Measurements of Several Colocated Receivers on the Observation Level. IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing, 17, 7841–7851. https://doi.org/10.1109/JSTARS.2024.3381792

Weihing, P., Cormier, M., Lutz, T., & Krämer, E. (2024). The near-wake development of a wind turbine operating in stalled conditions : Part 1: Assessment of numerical models. Wind Energy Science, 9(4), Article 4. https://doi.org/10.5194/wes-9-933-2024

Wuttke, E., Heinrichs, K., Kögler, K., & Just, A. (2024). How training quality, trainer competence, and satisfaction with training affect vocational identification of apprentices in vocational education programs. Frontiers in Psychology, 15, 1200279. https://doi.org/10.3389/fpsyg.2024.1200279

Yu, W., Zhou, S. T., Lemmer, F., & Cheng, P. W. (2024). Control co-design optimization of floating offshore wind turbines with tuned liquid multi-column dampers. Wind Energy Science, 9(4), Article 4. https://doi.org/10.5194/wes-9-1053-2024

Zahedian, M., Keller, M., Kwon, M., Javadzade, J., Meinel, J., Vorobyov, V., & Wrachtrup, J. (2024). On readout and initialisation fidelity by finite demolition single shot readout. Quantum Science and Technology, 9(1), Article 1. https://doi.org/10.1088/2058-9565/ad133f

Abdallah, A., Agag, T., & Schwieger, V. (2023). Method of Development of a New Regional Ionosphere Model (RIM) to Improve Static Single-Frequency Precise Point Positioning (SF-PPP) for Egypt Using Bernese GNSS Software. Remote Sensing, 15(12), Article 12. https://doi.org/10.3390/rs15123147

Abdelhady, O., Spyridonos, E., & Dahy, H. (2023). Bio-Modules: Mycelium-Based Composites Forming a Modular Interlocking System through a Computational Design towards Sustainable Architecture. Designs, 7(1), Article 1. https://doi.org/10.3390/designs7010020

Abdou, K., Mohammed, O., Eskandar, G. B. F., Ibrahim, A., Matt, P.-A., & Huber, M. (2023). Smart nesting : estimating geometrical compatibility in the nesting problem using graph neural networks. Journal of Intelligent Manufacturing, 1–17. https://doi.org/10.1007/s10845-023-02179-0

Aberle, B., Kowalczyk, D., Massini, S., Egler-Kemmerer, A.-N., Gergel, S., Hammer, S. C., & Hauer, B. (2023). Methylierung nicht-aktivierter Alkene mit modifizierten Methyltransferasen zur Diversifizierung von Terpenoiden. Angewandte Chemie, 135(26), Article 26. https://doi.org/10.1002/ange.202301601

Aberle, B., Kowalczyk, D., Massini, S., Egler-Kemmerer, A.-N., Gergel, S., Hammer, S. C., & Hauer, B. (2023). Methylation of Unactivated Alkenes with Engineered Methyltransferases To Generate Non-natural Terpenoids. Angewandte Chemie, 62(26), Article 26. https://doi.org/10.1002/anie.202301601

Ackermann, A. C., Demleitner, M., Guhathakurta, J., Carosella, S., Ruckdäschel, H., Simon, S., Fox, B. L., & Middendorf, P. (2023). Mechanical, thermal, and electrical properties of amine- and non-functionalized reduced graphene oxide/epoxy carbon fiber-reinforced polymers. Polymer Composites, 44(8), Article 8. https://doi.org/10.1002/pc.27461

Aiello, M., & Georgievski, I. (2023). Service composition in the ChatGPT era. Service Oriented Computing and Applications, 17, 233–238. https://doi.org/10.1007/s11761-023-00367-7

Alsaffar, A., Sun, K., & Simon, S. (2023). Multi-material blind beam hardening correction in near real-time based on non-linearity adjustment of projections. Journal of Real-Time Image Processing, 20, 20. https://doi.org/10.1007/s11554-023-01285-9

Amann, S., Haist, T., Gatto, A., Kamm, M., & Herkommer, A. (2023). Design and realization of a miniaturized high resolution computed tomography imaging spectrometer. Journal of the European Optical Society, 19(2), Article 2. https://doi.org/10.1051/jeos/2023027

Angstenberger, S., Ruchka, P., Hentschel, M., Steinle, T., & Gießen, H. (2023). Hybrid fiber-solid-state laser with 3D-printed intracavity lenses. Optics Express, 48(24), Article 24. https://doi.org/10.1364/OL.504940

Arasteh-Khoshbin, O., Seyedpour, S. M., Brodbeck, M., Lambers, L., & Ricken, T. (2023). On effects of freezing and thawing cycles of concrete containing nano-SiO2 : experimental study of material properties and crack simulation. Scientific Reports, 13, 22278. https://doi.org/10.1038/s41598-023-48211-4

Arndt, M., Dazer, M., Raither, W., & Bertsche, B. (2023). Parameter assessment for reliability modeling of machine components using heuristic screening. Forschung Im Ingenieurwesen, 87(4), Article 4. https://doi.org/10.1007/s10010-023-00711-5

Arnim, M. von, Eichler, S., Brätz, O., Hildebrand, J., Kuhlmann, U., Bergmann, J. P., & Flügge, W. (2023). Study on load-carrying capacity of MAG butt-welded mixed connections with different steel strengths. Ce/Papers, 6(3–4), Article 3–4. https://doi.org/10.1002/cepa.2262

Askari Lasaki, B., Maurer, P., & Schönberger, H. (2023). A Fundamental Study on the Extraction of Particulate Organic Carbon from Municipal Wastewater Treatment Plants. Water, 15(10), Article 10. https://doi.org/10.3390/w15101861

Askari Lasaki, B., Maurer, P., & Schönberger, H. (2023). Effect of coupling primary sedimentation tank (PST) and microscreen (MS) to remove particulate organic carbon (POC) : a study to mitigate energy demand in municipal wastewater treatment plants. Sustainable Environment Research, 33(1), Article 1. https://doi.org/10.1186/s42834-023-00186-7

Askari Lasaki, B., Maurer, P., Schönberger, H., & Alvarez, E. P. (2023). Empowering municipal wastewater treatment : enhancing particulate organic carbon removal via chemical advanced primary treatment. Environmental Technology & Innovation, 32, 103436. https://doi.org/10.1016/j.eti.2023.103436

Aslani, V., Toulouse, A., Schmid, M., Gießen, H., Haist, T., & Herkommer, A. (2023). 3D printing of colored micro-optics. Optical Materials Express, 13(5), Article 5. https://doi.org/10.1364/OME.489681

Ates, F., Marquetand, J., & Zimmer, M. (2023). Detecting age-related changes in skeletal muscle mechanics using ultrasound shear wave elastography. Scientific Reports, 13(1), Article 1. https://doi.org/10.1038/s41598-023-47468-z

Attalah, I., Nylund, P., & Brem, A. (2023). Who captures value from hackathons? Innovation contests with collective intelligence tools bridging creativity and coupled open innovation. Creativity and Innovation Management, 32(2), Article 2. https://doi.org/10.1111/caim.12552

Auch, M., Kuthada, T., Giese, S., & Wagner, A. (2023). Influence of Lithium-Ion-Battery Equivalent Circuit Model Parameter Dependencies and Architectures on the Predicted Heat Generation in Real-Life Drive Cycles. Batteries, 9(5), Article 5. https://doi.org/10.3390/batteries9050274

Avdyli, A., Fill, A., & Birke, K. P. (2023). Modeling and Experimental Investigation of the Interaction between Pressure-Dependent Aging and Pressure Development Due to the Aging of Lithium-Ion Cells. Batteries, 9(10), Article 10. https://doi.org/10.3390/batteries9100484

Bahr, T., & Zinn, B. (2023). Gender Differences in the New Interdisciplinary Subject Informatik, Mathematik, Physik (IMP)-Sticking with STEM? Education Sciences, 13(5), Article 5. https://doi.org/10.3390/educsci13050478

Bardossy, A., & Anwar, F. (2023). Why do our rainfall–runoff models keep underestimating the peak flows? Hydrology and Earth System Sciences, 27(10), Article 10. https://doi.org/10.5194/hess-27-1987-2023

Bareiß, L., Platz, F., & Wirzberger, M. (2023). Implicit assumptions of (prospective) music school teachers about musically gifted students. Social Psychology of Education, 1–33. https://doi.org/10.1007/s11218-023-09833-8

Bauer, R., Ngo, Q., Reina, G., Frey, S., Flemisch, B., Hauser, H., Ertl, T., & Sedlmair, M. (2023). Visual Ensemble Analysis of Fluid Flow in Porous Media Across Simulation Codes and Experiment. Transport in Porous Media, 1–29. https://doi.org/10.1007/s11242-023-02019-y

Bayer, F., & Leine, R. I. (2023). Sorting-free Hill-based stability analysis of periodic solutions through Koopman analysis. Nonlinear Dynamics, 111, 8439–8466. https://doi.org/10.1007/s11071-023-08247-7

Bayerbach, M., D’Aurelio, S., Loock, P. van, & Barz, S. (2023). Bell-state measurement exceeding 50% success probability with linear optics. Science Advances, 9(32), Article 32. https://doi.org/10.1126/sciadv.adf4080

Becher, M., Heinemann, M., Marmann, T., Reina, G., Weiskopf, D., & Ertl, T. (2023). Accelerated 2D visualization using adaptive resolution scaling and temporal reconstruction. Journal of Visualization, 26, 1155–1172. https://doi.org/10.1007/s12650-023-00925-3

Bechtold, M., Barzen, J., Leymann, F., Mandl, A., Obst, J., Truger, F., & Weder, B. (2023). Investigating the effect of circuit cutting in QAOA for the MaxCut problem on NISQ devices. Quantum Science and Technology, 8(4), Article 4. https://doi.org/10.1088/2058-9565/acf59c

Beisswanger, R., Pruß, C., & Reichelt, S. (2023). Retrace error calibration for interferometric measurements using an unknown optical system. Optics Express, 31(17), Article 17. https://doi.org/10.1364/OE.496059

Benn, M., & Stoy, C. (2023). Implementing asset information requirement templates for corporate real estate management : A study in the chemical industry. Developments in the Built Environment, 16(December), Article December. https://doi.org/10.1016/j.dibe.2023.100224

Bens, T., Walter, R., Beerhues, J., Schmitt, M., Krossing, I., & Sarkar, B. (2023). The Best of Both Worlds : Combining the Power of MICs and WCAs To Generate Stable and Crystalline CrI-Tetracarbonyl Complexes with π-Accepting Ligands. Chemistry - a European Journal, 29(50), Article 50. https://doi.org/10.1002/chem.202301205

Berkmann, F., Steuer, O., Ganss, F., Prucnal, S., Schwarz, D., Fischer, A., & Schulze, J. (2023). Sharp MIR plasmonic modes in gratings made of heavily doped pulsed laser-melted Ge1-xSnx. Optical Materials Express, 13(3), Article 3. https://doi.org/10.1364/OME.479637

Bett, C., Daiber-Huppert, M., Frenner, K., & Osten, W. (2023). Evaluation of a time-gated-single-pixel-camera as a promising sensor for autonomous vehicles in harsh weather conditions. Journal of the European Optical Society, 19(1), Article 1. https://doi.org/10.1051/jeos/2023023

Bettenmann, D. (2023). It’s all about opportunities : sourcing and selection of new ventures to accelerate innovation. R & D Management, 53(5), Article 5. https://doi.org/10.1111/radm.12587

Beydeda, C., Nikolaou, K., Tochtermann, M., Ebensperger, N. G., Untereiner, G., Farag, A., Karl, P., Ubl, M., Gießen, H., Dressel, M., & Scheffler, M. (2023). Characterization of harmonic modes and parasitic resonances in multi-mode superconducting coplanar resonators. AIP Advances, 13(10), Article 10. https://doi.org/10.1063/5.0152461

Bibartiu, O., Dürr, F., Rothermel, K., Ottenwälder, B., & Grau, A. (2023). Availability analysis of redundant and replicated cloud services with Bayesian networks. Quality and Reliability Engineering International. https://doi.org/10.1002/qre.3414

Bieber, S., Auricchio, F., Reali, A., & Bischoff, M. (2023). Artificial instabilities of finite elements for nonlinear elasticity : Analysis and remedies. International Journal for Numerical Methods in Engineering, 124(11), Article 11. https://doi.org/10.1002/nme.7224

Bienert, F., Graf, T., & Abdou Ahmed, M. (2023). General mathematical model for the period chirp in interference lithography. Optics Express, 31(4), Article 4. https://doi.org/10.1364/OE.481887

Bienert, F., Röcker, C., Dietrich, T., Graf, T., & Abdou Ahmed, M. (2023). Detrimental effects of period-chirped gratings in pulse compressors. Optics Express, 31(24), Article 24. https://doi.org/10.1364/OE.505875

Bienert, F., Röcker, C., Graf, T., & Abdou Ahmed, M. (2023). Simple spatially resolved period measurement of chirped pulse compression gratings. Optics Express, 31(12), Article 12. https://doi.org/10.1364/OE.489238

Bierbaum, T., Hansen, S. K., Poudel, B., & Haslauer, C. (2023). Investigating rate-limited sorption, sorption to air-water interfaces, and colloid-facilitated transport during PFAS leaching. Environmental Science and Pollution Research, 30, 121529–121547. https://doi.org/10.1007/s11356-023-30811-2

Bin Ridzuan, A. R., Schmauder, S., Manurung, Y. H. P., Binkele, P., Dusza, J., Csanadi, T., Ahmad, M. I. M., Mat, M. F., & Dogahe, K. J. (2023). Assessing Fatigue Life Cycles of Material X10CrMoVNb9-1 through a Combination of Experimental and Finite Element Analysis. Metals, 13(12), Article 12. https://doi.org/10.3390/met13121947

Blagojevic, B., & Sawodny, O. (2023). Path planning for graded concrete element fabrication. Construction Robotics, 7, 125–139. https://doi.org/10.1007/s41693-023-00096-5

Blind, M., Kleinert, J., Lutz, T., & Beck, A. (2023). A time-accurate inflow coupling for zonal LES. CEAS Aeronautical Journal, 19. https://doi.org/10.1007/s13272-023-00638-1

Blumendeller, E., Gaßner, L., Müller, F. J. Y., Pohl, J., Hübner, G., Ritter, J., & Cheng, P. W. (2023). Quantification of amplitude modulation of wind turbine emissions from acoustic and ground motion recordings. Acta Acustica, 7(55), Article 55. https://doi.org/10.1051/aacus/2023047

Boehm, T. G. (2023). Zur Erschließung semantischer Strukturen durch algebraisch-topologische Konzepte. Nietzscheforschung, 30(1), Article 1. https://doi.org/10.1515/NIFO-2023-022

Bogner, J., Kotstein, S., & Pfaff, T. (2023). Do RESTful API design rules have an impact on the understandability of Web APIs? Empirical Software Engineering, 28(6), Article 6. https://doi.org/10.1007/s10664-023-10367-y

Bornschlegl, S. M., Krause, P., Kropp, C., & Leistner, P. (2023). Analysis of the Microclimatic and Biodiversity-Enhancing Functions of a Living Wall Prototype for More-than-Human Conviviality in Cities. Buildings, 13(6), Article 6. https://doi.org/10.3390/buildings13061393

Brauchler, A., Gonzalez, S., Vierneisel, M., Ziegler, P., Antonacci, F., Sarti, A., & Eberhard, P. (2023). Model-predicted geometry variations to compensate material variability in the design of classical guitars. Scientific Reports, 13(1), Article 1. https://doi.org/10.1038/s41598-023-37943-y

Braun, K., Kropp, C., & Boeva, Y. (2023). Constructing platform capitalism : inspecting the political techno-economy of Building Information Modelling. Architectural Research Quarterly, 26(3), Article 3. https://doi.org/10.1017/S135913552200046X

Brem, A., Nylund, P., & Roshani, S. (2023). Unpacking the complexities of crisis innovation : a comprehensive review of ecosystem-level responses to exogenous shocks. Review of Managerial Science, 1–24. https://doi.org/10.1007/s11846-023-00709-x

Brendecke, E., Tsitlakidis, S., Götze, M., Hagmann, S., & Ates, F. (2023). Quantifying the effects of achilles tendon lengthening surgery : an intraoperative approach. Frontiers in Physiology, 14, 1–9. https://doi.org/10.3389/fphys.2023.1143292

Briesenick, D., & Liewald, M. (2023). Efficient net shape forming of high-strength sheet metal parts by Transversal Compression Drawing. The International Journal of Advanced Manufacturing Technology, 130, 3053–3063. https://doi.org/10.1007/s00170-023-12880-2

Brinkmeier, D., Onuseit, V., & Graf, T. (2023). Feasibility assessment of parallelized helical drilling. Optical Engineering, 62(3), Article 3. https://doi.org/10.1117/1.oe.62.3.035106

Broche, J., Köhler, A. R., Kühnel, F., Osteresch, B., Chandrasekaran, T. T., Adam, S., Brockmeyer, J., & Jeltsch, A. (2023). Genome-wide deposition of 6-methyladenine in human DNA reduces the viability of HEK293 cells and directly influences gene expression. Communications Biology, 6, 138. https://doi.org/10.1038/s42003-023-04466-1

Brookman, M. W., Holland, L. A., Thomas, M. B., Austin, M. E., Barada, K., Gentle, K. W., La Haye, R. J., Leddy, J. B., Petty, C. C., Rhodes, T. L., Yan, Z., Vann, R. G. L., & Köhn-Seemann, A. (2023). Broadening of microwave heating beams in the DIII-D tokamak by edge turbulence. Nuclear Fusion, 63(4), Article 4. https://doi.org/10.1088/1741-4326/acbb8e

Brändle, M., Sotiriadou, C., & Zinn, B. (2023). Self-assessments, attitudes, and motivational orientations towards the use of digital media in teaching a comparison between student teachers of different subject clusters. Heliyon, 9(9), Article 9. https://doi.org/10.1016/j.heliyon.2023.e19516

Bucklin, O., Di Bari, R., Amtsberg, F., & Menges, A. (2023). Environmental Impact of a Mono-Material Timber Building Envelope with Enhanced Energy Performance. Sustainability, 15(1), Article 1. https://doi.org/10.3390/su15010556

Bunz, E. K., Häufle, D., Remy, D., & Schmitt, S. (2023). Bioinspired preactivation reflex increases robustness of walking on rough terrain. Scientific Reports, 13(1), Article 1. https://doi.org/10.1038/s41598-023-39364-3

Buser, M., Hofele, M., Menold, T., Riegel, H., & Michalowski, A. (2023). Enhanced Scaling of Material Removal Rate with High Surface Quality Through Combined Laser Processes. Lasers in Manufacturing and Materials Processing, 1–15. https://doi.org/10.1007/s40516-023-00234-5

Bárdossy, A. (2023). Changing correlations: a flexible definition of non-Gaussian multivariate dependence. Stochastic Environmental Research and Risk Assessment, 37, 2619–2629. https://doi.org/10.1007/s00477-023-02408-1

Bühler, C., Ilg, T., & Büchler, H. P. (2023). Quantum fluctuations in one-dimensional supersolids. Physical Review Research, 5(3), Article 3. https://doi.org/10.1103/PhysRevResearch.5.033092

Cattaneo, S., Mahadik, V. K., Genesio, G., & Hofmann, J. (2023). Influence of edge proximity on concrete breakout failure in post-installed RC columns foundation joints. Materials and Structures, 56, 119. https://doi.org/10.1617/s11527-023-02208-7

Celik, A., Willems, F., Tüzün, M., Marinova, S., Heyn, J., Fiedler, M., & Bonten, C. (2023). Compounding, Rheology and Numerical Simulation of Highly Filled Graphite Compounds for Potential Fuel Cell Applications. Polymers, 15(12), Article 12. https://doi.org/10.3390/polym15122589

Chavli, E., & Pfeiffer, G. (2023). Centers of Hecke algebras of complex reflection groups. Beiträge Zur Algebra Und Geometrie, 18. https://doi.org/10.1007/s13366-023-00690-2

Choudalakis, M., Kungulovski, G., Mauser, R., Bashtrykov, P., & Jeltsch, A. (2023). Refined read-out : The hUHRF1 Tandem-Tudor domain prefers binding to histone H3 tails containing K4me1 in the context of H3K9me2/3. Protein Science, 32(9), Article 9. https://doi.org/10.1002/pro.4760

Christos, M., Sachdev, S., & Scheurer, M. (2023). Nodal band-off-diagonal superconductivity in twisted graphene superlattices. Nature Communications, 14(1), Article 1. https://doi.org/10.1038/s41467-023-42471-4

Class, H., Keim, L., Schirmer, L., Strauch, B., Wendel, K., & Zimmer, M. (2023). Seasonal Dynamics of Gaseous CO2 Concentrations in a Karst Cave Correspond with Aqueous Concentrations in a Stagnant Water Column. Geosciences, 13(2), Article 2. https://doi.org/10.3390/geosciences13020051

Dausch, V., Roth, D., Kreimeyer, M., & Bohr, S. (2023). Challenges of Using Augmented Reality to Support An Efficient and Error-Free Assembly in Complex Variant Environments. International Conference on Engineering Design, ICED23, 3, Article 3. https://doi.org/10.1017/pds.2023.86

Davidová, M., Barath, S., & Dickinson, S. (2023). Cultural environments with more-than-human perspectives : Prototyping through research and training. Agathón, 13, 165–178. https://doi.org/10.19229/2464-9309/13142023

de Jong, D., Karst, J., Ludescher, D., Flöß, M., Möll, S., Dirnberger, K., Hentschel, M., Ludwigs, S., Braun, P. V., & Gießen, H. (2023). Electrically switchable metallic polymer metasurface device with gel polymer electrolyte. Nanophotonics, 12(8), Article 8. https://doi.org/10.1515/nanoph-2022-0654

Deliktas, T., Liewald, M., Clauß, P., Schmid-Schirling, T., Kuntz, I., Feurer, M., Dimitropoulos, G., Wientapper, F., & Räuchle, F. (2023). Kontrolle und Identifizierung von Pressteilen im freien Fall : Digitalisierung beim Kaltfließpressen durch Freifallinspektion und -kontrolle. Werkstattstechnik, 113(10), Article 10. https://doi.org/10.37544/1436-4980-2023-10-11

Deng, X.-L. (2023). Evaluation of gravitational curvatures for a tesseroid and spherical shell with arbitrary-order polynomial density. Journal of Geodesy, 97, 18. https://doi.org/10.1007/s00190-023-01708-2

Deng, X.-L. (2023). Corrections to: “Accurate computation of gravitational field of a tesseroid” by Fukushima (2018) in J. Geod. 92(12):1371–1386. Journal of Geodesy, 97, 8. https://doi.org/10.1007/s00190-022-01673-2

Deng, X.-L., & Sneeuw, N. (2023). Analytical Solutions for Gravitational Potential up to Its Third-order Derivatives of a Tesseroid, Spherical Zonal Band, and Spherical Shell. Surveys in Geophysics, 44, 1125–1173. https://doi.org/10.1007/s10712-023-09774-z

Didychenko, D., Esser, S., Beirow, F., Savchenko, A., Pruß, C., Graf, T., & Abdou Ahmed, M. (2023). Generation of a radially polarized beam in a polycrystalline ceramic Yb:Lu2O3 thin-disk laser. Applied Physics. B, Lasers and Optics, 129, 146. https://doi.org/10.1007/s00340-023-08089-6

Diem, A. M., Bill, J., & Burghard, Z. (2023). Fast One-Step Fabrication of Highly Regular Microscrolls with Controllable Surface Morphology. Advanced Science, 10(21), Article 21. https://doi.org/10.1002/advs.202302103

Dinkelacker, J., Kaiser, D., Panzeri, M., Parmentier, P., Neumaier, M., Tonhäuser, C., & Rudolph, S. (2023). System integration based on packing, piping and harness routing automation using graph-based design languages. CEAS Aeronautical Journal, 14, 591–606. https://doi.org/10.1007/s13272-023-00642-5

Dittmann, D., Kaya, E., & Dyballa, M. (2023). Desilicated ZSM-5 Catalysts : Properties and Ethanol to Aromatics (ETA) Performance. ChemCatChem, 15(20), Article 20. https://doi.org/10.1002/cctc.202300716

Dufner, L., Oßwald, B., Eberspaecher, J., Riedel, B., Kling, C., Kern, F., & Seidenstuecker, M. (2023). Adjustment of Micro- and Macroporosity of ß-TCP Scaffolds Using Solid-Stabilized Foams as Bone Replacement. Bioengineering, 10(2), Article 2. https://doi.org/10.3390/bioengineering10020256

Dufner, L., Ott, F., Otto, N., Lembcke, T., & Kern, F. (2023). Immobilization of TiO2 Photocatalysts for Water Treatment in Geopolymer Based Coatings. Catalysts, 13(5), Article 5. https://doi.org/10.3390/catal13050898

Dula, I., Berberena, T., Keplinger, K., & Wirzberger, M. (2023). Hooked on artificial agents : a systems thinking perspective. Frontiers in Behavioral Economics, 2, 01–12. https://doi.org/10.3389/frbhe.2023.1223281

Ebel, H., Rosenfelder, M., & Eberhard, P. (2023). A note on the predictive control of non-holonomic systems and underactuated vehicles in the presence of drift. 93rd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), 23, 4, Article 23, 4. https://doi.org/10.1002/pamm.202300022

Ehlers, W. (2023). A historical review on porous-media research. 93rd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), 23, 3, Article 23, 3. https://doi.org/10.1002/pamm.202300271

Eichler, R., Gröger, C., Hoos, E., Stach, C., Schwarz, H., & Mitschang, B. (2023). Introducing the enterprise data marketplace : a platform for democratizing company data. Journal of Big Data, 10(1), Article 1. https://doi.org/10.1186/s40537-023-00843-z

Engelfried, M., Haffner, G., Baumann, M., & Bauer, F. (2023). Modeling the Pumping Behavior of Macroscopic Lead Structures on Shaft Counterfaces of Rotary Shaft Seals. Lubricants, 11(11), Article 11. https://doi.org/10.3390/lubricants11110495

Engelhardt, N. (2023). Tolerance. Victorian Literature and Culture, 51(3), Article 3. https://doi.org/10.1017/S1060150323000190

Engert, M., Werkle, K. T., Wegner, R., Born, L., Gresser, G. T., & Möhring, H.-C. (2023). Validation of the Manufacturing Methodology of Prestressed Fiber-Reinforced Polymer Concrete by the Variation of Process Parameters. Materials, 16(23), Article 23. https://doi.org/10.3390/ma16237377

Ertel, B., Meer, J. V. der, & Seifert, U. (2023). Waiting Time Distributions in Hybrid Models of Motor–Bead Assays : A Concept and Tool for Inference. International Journal of Molecular Sciences, 24(8), Article 8. https://doi.org/10.3390/ijms24087610

Esser, S., Xu, X., Wang, J., Zhang, J., Graf, T., & Abdou Ahmed, M. (2023). Single-crystal and ceramic Yb:Lu2O3 gain media for thin-disk oscillators. Applied Physics. B, Lasers and Optics, 129(10), Article 10. https://doi.org/10.1007/s00340-023-08103-x

Eugster, S. R., & Harsch, J. (2023). A family of total Lagrangian Petrov–Galerkin Cosserat rod finite element formulations. GAMM-Mitteilungen, 46(2), Article 2. https://doi.org/10.1002/gamm.202300008

Fahse, N., Millard, M., Kempter, F., Maier, S., Roller, M., & Fehr, J. C. (2023). Dynamic human body models in vehicle safety : an overview. GAMM-Mitteilungen, 46(2), Article 2. https://doi.org/10.1002/gamm.202300007

Falter, J., Binz, H., & Kreimeyer, M. (2023). Investigations on design limits and improved material utilization of press-fit connections using elastic-plastic design. Applications in Engineering Science, 13(March), Article March. https://doi.org/10.1016/j.apples.2022.100124

Fay, L., Cobos, E., Yang, B., Gatidis, S., & Küstner, T. (2023). Avoiding Shortcut-Learning by Mutual Information Minimization in Deep Learning-Based Image Processing. IEEE Access, 11, 64070–64086. https://doi.org/10.1109/ACCESS.2023.3289397

Fischer, F., Frenner, K., Granai, M., Fend, F., & Herkommer, A. (2023). Data-driven development of sparse multi-spectral sensors for urological tissue differentiation. Journal of the European Optical Society, 19(1), Article 1. https://doi.org/10.1051/jeos/2023030

Fischer, M., Walker, M., Lechler, A., Riedel, O., & Verl, A. (2023). Fehlertolerante Sicherheitssteuerung aus der Cloud : Softwarebasierte Sicherheitssteuerungen. Werkstattstechnik, 113(5), Article 5. https://doi.org/10.37544/1436-4980-2023-05-11

Fischer-Kennedy, S. B., Özbek, S., Wang, S., Grözing, M., Hesselbarth, J., Berroth, M., & Burghartz, J. (2023). Adaptive triple-fed antenna and thinned RF-chip integration into ultra thin flexible polymer foil. International Journal of Microwave and Wireless Technologies, 15(8), Article 8. https://doi.org/10.1017/S1759078723000818

Flemisch, B., Class, H., Gläser, D., & et. al. (2023). The FluidFlower Validation Benchmark Study for the Storage of CO2. Transport in Porous Media, 1–48. https://doi.org/10.1007/s11242-023-01977-7

Flöß, M., Steinle, T., & Gießen, H. (2023). Spectrally resolved ultrafast transient dynamics of a femtosecond fiber-feedback optical parametric oscillator. Optics Express, 31(26), Article 26. https://doi.org/10.1364/OE.509472

Flöß, M., Steinle, T., Werner, F., Wang, Y., Wagner, W. L., Steinle, V., Liu, B. S., Zheng, Y., Chen, Z., Ackermann, M., Mentzer, S. J., & Gießen, H. (2023). 3D stimulated Raman spectral imaging of water dynamics associated with pectin-glycocalyceal entanglement. Biomedical Optics Express, 14(4), Article 4. https://doi.org/10.1364/BOE.485314

Frasquet, C. P., Stoll, D., Kuthada, T., & Wagner, A. (2023). Experimental and Numerical Investigation of the Aerodynamic Ventilation Drag of Heavy-Duty Vehicle Wheels. Fluids, 8(2), Article 2. https://doi.org/10.3390/fluids8020064

Frey, W., Schwenger, A., Berking, T., & Richert, C. (2023). Transitions in Solvate Crystals of a Tetraaryladamantane. Helvetica Chimica Acta, 106(9), Article 9. https://doi.org/10.1002/hlca.202300102

Frick, K., Ebbing, T., Yeh, Y.-C., Schmid-Staiger, U., & Tovar, G. (2023). Influence of light conditions on the production of chrysolaminarin using Phaeodactylum tricornutum in artificially illuminated photobioreactors. MicrobiologyOpen, 12(5), Article 5. https://doi.org/10.1002/mbo3.1378

Frick, K., Ebbing, T., Yeh, Y.-C., Schmid-Staiger, U., & Tovar, G. (2023). Beta-glucan production of Phaeodactylum tricornutum, Monodopsis subterranea and Cylindrotheca fusiformis during nitrogen depletion. Journal of Applied Phycology. https://doi.org/10.1007/s10811-023-03026-8

Frie, L., & Eberhard, P. (2023). On shift selection for Krylov subspace based model order reduction : an iterative greedy approach combined with singular value decomposition. Multibody System Dynamics, 1–21. https://doi.org/10.1007/s11044-022-09872-7

Fritz, J., & Seifert, U. (2023). Thermodynamically consistent model of an active Ornstein-Uhlenbeck particle. Journal of Statistical Mechanics : Theory and Experiment, 2023(September), Article September. https://doi.org/10.1088/1742-5468/acf70c

Fritz, T. H., Saiger, D., & Burr, W. (2023). Innovationstrends bei Cloud-Services – Analyse der internationalen Patentaktivitäten : Innovation trends in cloud services-analysis of international patent activities. HMD Praxis Der Wirtschaftsinformatik, 60, 975–988. https://doi.org/10.1365/s40702-023-01007-6

Gambarelli, S., Fararoni Platas, R. N., Shankar, A., Dakova, S., Böhm, M., Sawodny, O., Nitzlader, M., & Blandini, L. (2023). Failure behavior of an adaptive concrete beam with integrated fluidic actuators : non-linear three-dimensional finite element analysis. Frontiers in Built Environment, 9, 1272785. https://doi.org/10.3389/fbuil.2023.1272785

Gao, Y., Ziegler, P., Hartlieb, E., Heinemann, C., & Eberhard, P. (2023). Reproduction of transport-induced vibration of paintings based on a multi-channel FxLMS controller. Acta Mechanica, 234, 5369–5384. https://doi.org/10.1007/s00707-023-03655-7

Geck, M. (2023). The character table of the finite Chevalley group F4(q) for q a power of 2. Archiv Der Mathematik, 1–11. https://doi.org/10.1007/s00013-023-01879-6

Gehringer, D., Kuthada, T., & Wagner, A. (2023). Thermal Management System of the UNICARagil Vehicles : A Comprehensive Overview. World Electric Vehicle Journal, 14(1), Article 1. https://doi.org/10.3390/wevj14010006

Geiger, C., & Riedelbach, S. (2023). Power Plant Transients including Hydraulic Short Circuit Operation Mode. Energies, 16(11), Article 11. https://doi.org/10.3390/en16114492

Geng, J., Shalomayeva, T., Gryzlova, M., Mukherjee, A., Santonocito, S., Dzhavadzade, D., Dasari, D., Kato, H., Stöhr, R., Denisenko, A., Mizuochi, N., & Wrachtrup, J. (2023). Dopant-assisted stabilization of negatively charged single nitrogen-vacancy centers in phosphorus-doped diamond at low temperatures. Npj Quantum Information, 9, 110. https://doi.org/10.1038/s41534-023-00777-7

Geß, A., & Kalonya, D. H. (2023). Sustainable Husbandry? : A Comparative LCA of Three Lamb Breeding Systems in Turkey. Circular Economy and Sustainability, 23. https://doi.org/10.1007/s43615-023-00249-2

Ghazal, I., Mansour, R., & Davidova, M. (2023). AGRI|gen: Analysis and Design of a Parametric Modular System for Vertical Urban Agriculture. Sustainability, 15(6), Article 6. https://doi.org/10.3390/su15065284

Giess, T., Itzigehl, S., Range, J., Schömig, R., Bruckner, J. R., & Pleiss, J. (2023). FAIR and scalable management of small-angle X-ray scattering data. Journal of Applied Crystallography, 56(2), Article 2. https://doi.org/10.1107/s1600576723001577

Graeb, F., & Bernhagen, P. (2023). Lokale Hauptwahl oder nationale Nebenwahl? : Der Einfluss von Gemeindegröße, Wahlsystem und Parteiensystem auf die Beteiligung an Kommunalwahlen. Politische Vierteljahresschrift. https://doi.org/10.1007/s11615-023-00506-x

Gratz, S., & Zvonareva, A. (2023). Lattices of t-structures and thick subcategories for discrete cluster categories. Journal of the London Mathematical Society, 107(3), Article 3. https://doi.org/10.1112/jlms.12705

Gräfe, M., Pettas, V., Gottschall, J., & Cheng, P. W. (2023). Quantification and correction of motion influence for nacelle-based lidar systems on floating wind turbines. Wind Energy Science, 8(6), Article 6. https://doi.org/10.5194/wes-8-925-2023

Gröger, A., Pedrini, G., Claus, D., Alekseenko, I., Gloeckler, F., & Reichelt, S. (2023). Advantages of holographic imaging through fog. Applied Optics, 62(10), Article 10. https://doi.org/10.1364/AO.478435

Gröger, A., Pedrini, G., Fischer, F., Claus, D., Aleksenko, I., & Reichelt, S. (2023). Two-wavelength digital holography through fog. Journal of the European Optical Society, 19(1), Article 1. https://doi.org/10.1051/jeos/2023024

Grübel, J., Albernaz, V. L., Tsianaka, A., Jauch, C. O., Quirin, S., Kerger, C., Kohl, C. G., Burger-Kentischer, A., Tovar, G., & Southan, A. (2023). Preparation of multifunctional hydrogels with accessible isothiouronium groups via radical cross-linking copolymerization. Scientific Reports, 13, 10361. https://doi.org/10.1038/s41598-023-36956-x

Grübel, J., Wendlandt, T., Urban, D., Jauch, C. O., Wege, C., Tovar, G., & Southan, A. (2023). Soft Sub-Structured Multi-Material Biosensor Hydrogels with Enzymes Retained by Plant Viral Scaffolds. Macromolecular Bioscience, 2300311. https://doi.org/10.1002/mabi.202300311

Gubaev, K., Zaverkin, V., Srinivasan, P., Duff, A. I., Kästner, J., & Grabowski, B. T. (2023). Performance of two complementary machine-learned potentials in modelling chemically complex systems. Npj Computational Materials, 9(1), Article 1. https://doi.org/10.1038/s41524-023-01073-w

Guenat, S., Bailey-Athias, J. P., & Fischer, L. K. (2023). Urban foraging in Brazilian public greenspaces. Ambio, 52, 1248–1261. https://doi.org/10.1007/s13280-023-01847-y

Gutierrez Galindo, E., Yilmaz, Z. H., & Haußer, A. (2023). Membrane trafficking in breast cancer progression : protein kinase D comes into play. Frontiers in Cell and Developmental Biology, 11, 1173387. https://doi.org/10.3389/fcell.2023.1173387

Guttá, C., Morhard, C., & Rehm, M. (2023). Applying a GAN-based classifier to improve transcriptome-based prognostication in breast cancer. PLoS Computational Biology, 19(4), Article 4. https://doi.org/10.1371/journal.pcbi.1011035

Gärtner, J. W., Kronenburg, A., Rees, A., & Oschwald, M. (2023). Investigating 3-D Effects on Flashing Cryogenic Jets with Highly Resolved LES. Flow, Turbulence and Combustion, 111(4), Article 4. https://doi.org/10.1007/s10494-023-00485-4

Gödeke, J., & Rigaud, G. (2023). Imaging based on Compton scattering : model uncertainty and data-driven reconstruction methods. Inverse Problems, 39, 034004. https://doi.org/10.1088/1361-6420/acb2ed

Görz, M., Schenek, A., Liewald, M., & Riedmüller, K. (2023). Einsatz von ML beim Scheren im offenen Schnitt : Bestimmung von mechanischen Blechkennwerten durch Maschinelles Lernen im offenen Beschnitt. Werkstattstechnik, 113(10), Article 10. https://doi.org/10.37544/1436-4980-2023-10-6

Haag, P., & Jünger, H. C. (2023). Turning a spotlight on construction logistics for a sustainable urban environment : a review of current policy concepts and literature. Frontiers in Built Environment, 9, 1202091. https://doi.org/10.3389/fbuil.2023.1202091

Hagendorff, T., Bossert, L., Fai, T. Y., & Singer, P. (2023). Speciesist bias in AI: a reply to Arandjelović. AI and Ethics, 1043–1047. https://doi.org/10.1007/s43681-023-00319-z

Hahn, L., Matter, F., & Eberhard, P. (2023). Transient optical simulation by coupling elastic multibody systems, finite elements, and ray tracing. Journal of the European Optical Society, 19(1), Article 1. https://doi.org/10.1051/jeos/2023006

Hamedani, Y. P., Çakırefe, S., Fietz, A., Hurst, J., Schnichels, S., & Adams, F. (2023). The Effect of mPEGA/EHA Ratio and Copolymer Composition on the Solution Behavior of Amphiphilic, Comb-Shape Copolymers Synthesized via Cu(0)-Mediated SET-LRP for Potential Drug Delivery Applications. Macromolecular Chemistry and Physics, 224(24), Article 24. https://doi.org/10.1002/macp.202300226

Hannss, J., Grün, J., Olbrich, C., Feldmeth, S., & Bauer, F. (2023). Multiphase Conjugate Heat Transfer Analyses on the Assembly Situation of Rotary Shaft Seals. Applied Sciences, 13(19), Article 19. https://doi.org/10.3390/app131911026

Hans, A. C., Becker, P. M., Haußmann, J., Suhr, S., Wanner, D. M., Lederer, V., Willig, F., Frey, W., Sarkar, B., Kästner, J., & Peters, R. (2023). A Practical and Robust Zwitterionic Cooperative Lewis Acid/Acetate/Benzimidazolium Catalyst for Direct 1,4-Additions. Angewandte Chemie, 62(13), Article 13. https://doi.org/10.1002/anie.202217519

Harsch, J., & Eugster, S. R. (2023). Nonunit quaternion parametrization of a Petrov–Galerkin Cosserat rod finite element. Proceedings in Applied Mathematics and Mechanics, 23(4), Article 4. https://doi.org/10.1002/pamm.202300172

Harsch, J., Sailer, S., & Eugster, S. R. (2023). A total Lagrangian, objective and intrinsically locking-free Petrov–Galerkin SE(3) Cosserat rod finite element formulation. International Journal for Numerical Methods in Engineering, 124(13), Article 13. https://doi.org/10.1002/nme.7236

Hartlieb, E., Ziegler, P., & Eberhard, P. (2023). Vibration analysis on newly designed painting supports for the Cranach exhibition 2022 at Herzogin Anna Amalia Bibliothek. In M. Kaliske (Ed.), 92nd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Vols. 22, 1, p. e202200324). Wiley. https://doi.org/10.1002/pamm.202200324

Hartlieb, S., Schober, C., Haist, T., & Reichelt, S. (2023). Field evaluation of a novel holographic single-image depth reconstruction sensor. Journal of the European Optical Society, 19(1), Article 1. https://doi.org/10.1051/jeos/2023017

Harzenetter, L., Breitenbücher, U., Binz, T., & Leymann, F. (2023). An Integrated Management System for Composed Applications Deployed by Different Deployment Automation Technologies. SN Computer Science, 4, 370. https://doi.org/10.1007/s42979-023-01810-4

Hay, J., Schories, L., Bayerschen, E., Wimmer, P., Zehbe, O., Kirschbichler, S., & Fehr, J. C. (2023). Application of data-driven surrogate models for active human model response prediction and restraint system optimization. Frontiers in Applied Mathematics and Statistics, 9, 1–16. https://doi.org/10.3389/fams.2023.1156785

Heinemann, T., Ajdinovic, S., Lechler, A., & Riedel, O. (2023). OPC UA Tests im Kontext einer Dateninfrastruktur : Aussagekraft von OPC UA Testfällen für die innerbetriebliche Dateninfrastruktur. Werkstattstechnik, 113(5), Article 5. https://doi.org/10.37544/1436-4980-2023-05-29

Helber, F., Carosella, S., & Middendorf, P. (2023). Effects of reactive and non-reactive tackifying agents on mechanical neat resin and composite performance for preforming processes and Liquid Resin Infusion (LRI) techniques. Advanced Manufacturing : Polymer & Composites Science, 9(1), Article 1. https://doi.org/10.1080/20550340.2023.2205796

Helbich, S., Barrantes, I., Borges, L. G. dos A., Pieper, D. H., Vainshtein, Y., Sohn, K., & Engesser, K. H. (2023). The 2-methylpropene degradation pathway in Mycobacteriaceae family strains. Environmental Microbiology, 25(11), Article 11. https://doi.org/10.1111/1462-2920.16449

Hentschel, M., Koshelev, K., Sterl, F., Both, S., Karst, J., Shamsafar, L., Weiss, T., Kivshar, Y., & Gießen, H. (2023). Dielectric Mie voids: confining light in air. Light : Science & Applications, 12, 3. https://doi.org/10.1038/s41377-022-01015-z

Herberichs, C., & Viehhauser, G. (2023). Varianz vermitteln : zur editorischen Aufarbeitung abweichender Textfassungen in Redaktionen von Der Heiligen Leben. Editio, 36(1), Article 1. https://doi.org/10.1515/editio-2022-0008

Hermann, F., Michaelowski, A., Brünnette, T., Reimann, P., Vogt, S., & Grof, T. (2023). Data-Driven Prediction and Uncertainty Quantification of Process Parameters for Directed Energy Deposition. Materials, 16(23), Article 23. https://doi.org/10.3390/ma16237308

Heudorfer, K., Bauer, J. V., Caydamli, Y., Gompf, B., Take, J., Bauchmeiser, M. R., & Middendorf, P. (2023). Method of Manufacturing Structural, Optically Transparent Glass Fiber-Reinforced Polymers (tGFRP) Using Infusion Techniques with Epoxy Resin Systems and E-Glass Fabrics. Polymers, 15(9), Article 9. https://doi.org/10.3390/polym15092183

Heß, M., & Schneider, G. (2023). A robust way to justify the derivative NLS approximation. Zeitschrift Für Angewandte Mathematik Und Physik, 74(224), Article 224. https://doi.org/10.1007/s00033-023-02121-7

Hillebrand, M., Müller, J., Ullah, J., & Lutz, T. (2023). Investigation of a Realistic Flap Modeling Using a Combination of Chimera Method and Grid Deformation on a Wing Fuselage Configuration. In M. Kaliske (Ed.), 92nd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Vols. 22, 1, p. e202200101). Wiley. https://doi.org/10.1002/pamm.202200101

Hirsch, V., Reimann, P., Treder-Tschechlov, D., Schwarz, H., & Mitschang, B. (2023). Exploiting domain knowledge to address class imbalance and a heterogeneous feature space in multi-class classification. The VLDB Journal, 28. https://doi.org/10.1007/s00778-023-00780-6

Hoffmann, J. P., Van den Eynde, J., & Steelant, J. (2023). An analysis tool for boundary layer and correlation-based transition onset assessment on generic geometries. CEAS Space Journal, 923–945. https://doi.org/10.1007/s12567-023-00507-x

Hoffmann, T. (2023). Interviewkunst : Gegenwartsliteratur als Entparatextualisierung : The Art of the Interview : Contemporary Literature as De-Paratextualization. Deutsche Vierteljahrsschrift Für Literaturwissenschaft Und Geistesgeschichte, 97(4), Article 4. https://doi.org/10.1007/s41245-023-00224-7

Hofmann, G., & Kuhlmann, U. (2023). Influence of the geometry of butt welds and longitudinal attachments on their fatigue resistance. Ce/Papers, 6(3–4), Article 3–4. https://doi.org/10.1002/cepa.2333

Hole, D. (2023). The relationship between Chinese zhiyou ‘only’ and cai: a matter of morphosyntax. Journal of East Asian Linguistics, 245–260. https://doi.org/10.1007/s10831-023-09257-7

Holzhey, P., Prettl, M., Collavini, S., Mortan, C., & Saliba, M. (2023). Understanding the impact of surface roughness : changing from FTO to ITO to PEN/ITO for flexible perovskite solar cells. Scientific Reports, 13, 6375. https://doi.org/10.1038/s41598-023-33147-6

Hommel, P., Roth, D., Binz, H., & Kreimeyer, M. (2023). Implementation of a Design Guideline for Aluminum Foam Sandwich Based on Industrial Demands. International Conference on Engineering Design, ICED23, 3, Article 3. https://doi.org/10.1017/pds.2023.224

Horn, T., Gosliga, A., Li, C., Enculescu, M., & Legewie, S. G. (2023). Position-dependent effects of RNA-binding proteins in the context of co-transcriptional splicing. Npj Systems Biology and Applications, 9, 1. https://doi.org/10.1038/s41540-022-00264-3

Horter, T., Rühl, H., Yang, W., Chiang, Y.-S., Glaeser, K., & Zimmermann, A. (2023). Image Analysis Based Evaluation of Print Quality for Inkjet Printed Structures. Journal of Manufacturing and Materials Processing, 7(1), Article 1. https://doi.org/10.3390/jmmp7010020

Houba, N., Delchambre, S., Hechenblaikner, G., Ziegler, T., & Fichter, W. (2023). Time-delay interferometry infinity for tilt-to-length noise estimation in LISA. Classical and Quantum Gravity, 40(10), Article 10. https://doi.org/10.1088/1361-6382/accbfc

Hufert, J., Grebhardt, A., Schneider, Y., Bonten, C., & Schmauder, S. (2023). Deformation Behavior of 3D Printed Auxetic Structures of Thermoplastic Polymers : PLA, PBAT, and Blends. Polymers, 15(2), Article 2. https://doi.org/10.3390/polym15020389

Hufgard, F., Dürnhofer, C., Fasoulas, S., & Löhle, S. (2023). Novel heat flux controlled surface cooling for hypersonic flight. Scientific Reports, 13(1), Article 1. https://doi.org/10.1038/s41598-023-40281-8

Huth, F., Blascheck, T., Koch, S., & Ertl, T. (2023). Studies and design considerations for animated transitions between small-scale visualizations. Journal of Visualization, 26(6), Article 6. https://doi.org/10.1007/s12650-023-00937-z

Härer, F., & Herzwurm, G. (2023). Entwicklung und Evaluation einer gamifizierten Design Thinking Methode für die frühe Phase des Innovationsmanagements. HMD : Praxis Der Wirtschaftsinformatik, 60, 721–737. https://doi.org/10.1365/s40702-023-00966-0

Hönig, J., Littfinski, D., Schnierle, M., Röck, S., & Verl, A. (2023). Konzept zur Testfallgenerierung mittels Mixed Reality : Erweiterung der Testautomatisierung um Methoden der Mixed-Reality-in-the-Loop-Simulation (MRiLS). Werkstattstechnik, 113(5), Article 5. https://doi.org/10.37544/1436-4980-2023-05-22

Höpfl, S., Pleiss, J., & Radde, N. E. (2023). Bayesian estimation reveals that reproducible models in Systems Biology get more citations. Scientific Reports, 13, 2695. https://doi.org/10.1038/s41598-023-29340-2

Jagfeld, S. M. P., Birke, K. P., Fill, A., & Keil, P. (2023). How Cell Design Affects the Aging Behavior : Comparing Electrode-Individual Aging Processes of High-Energy and High-Power Lithium-Ion Batteries Using High Precision Coulometry. Batteries, 9(4), Article 4. https://doi.org/10.3390/batteries9040232

Jahedi, A., Luz, M., Rivinius, M., Mehl, L., & Bruhn, A. (2023). MS-RAFT plus: High Resolution Multi-Scale RAFT. International Journal of Computer Vision. https://doi.org/10.1007/s11263-023-01930-7

Jamshed, A., Patel, C., Puriya, A., Iqba, N., Rana, I. A., McMillan, J. M., Pandey, R., Altaf, S., Mehmood, R. T., & Saad, U. bin. (2023). Flood resilience assessment from the perspective of urban (in)formality in Surat, India : Implications for sustainable development. Natural Hazards, 1–30. https://doi.org/10.1007/s11069-023-06267-5

Jayaram, A., & Speck, T. (2023). Effective dynamics and fluctuations of a trapped probe moving in a fluid of active hard discs(a). Epl, 143(1), Article 1. https://doi.org/10.1209/0295-5075/acdf1a

Jimenez, C. E., Hellmann, C., Toulouse, A., Drozella, J., Wyrowski, F., & Herkommer, A. (2023). Numerical analysis of micro-optics based single photon sources via a combined physical optics and rigorous simulations approach. Optics Express, 31(24), Article 24. https://doi.org/10.1364/OE.502926

Johann, K., Wolf, A., & Bonten, C. (2023). Mechanical Properties of 3D-Printed Liquid Crystalline Polymers with Low and High Melting Temperatures. Materials, 17(1), Article 1. https://doi.org/10.3390/ma17010152

Jung, J. H., Srinivasan, P., Forslund, A., & Grabowski, B. T. (2023). High-accuracy thermodynamic properties to the melting point from ab initio calculations aided by machine-learning potentials. Npj Computational Materials, 9, 3. https://doi.org/10.1038/s41524-022-00956-8

Kaeswurm, J. A. H., Sempio, R., Manca, F., Burandt, M. R., & Buchweitz, M. (2023). Analyzing Bioaccessibility of Polyphenols in Six Commercial and Six Traditional Apples (Malus domestica Borkh.) during In Vitro and Ex Vivo Oral Digestion. Molecular Nutrition & Food Research, 67(22), Article 22. https://doi.org/10.1002/mnfr.202300055

Kalu-Uka, A., Ozoegwu, C., & Eberhard, P. (2023). 3D FEM Simulation of Titanium Alloy (Ti6Al4V) Machining with Harmonic Endmill Tools. In M. Kaliske (Ed.), 92nd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Vols. 22, 1, p. e202200111). Wiley. https://doi.org/10.1002/pamm.202200111

Kamm, V., Mesmer, P., Lechler, A., & Verl, A. (2023). Prozessmodellierung für das Rührreibschweißen : Semi-analytisches Prozessmodell für das roboterbasierte Rührreibschweißen : Process modeling of friction stir welding : Semi-analytical process model of robotic friction stir welding. Werkstattstechnik, 113(5), Article 5. https://doi.org/10.37544/1436-4980-2023-05-5

Kammerer, M., Purkl, F., & Geigle, K. P. (2023). Development of an optical particle number sensor based on continuous wave laser-induced incandescence. Applied Physics. B, Lasers and Optics, 129(10), Article 10. https://doi.org/10.1007/s00340-023-08113-9

Kannen, B., & Rasche, B. (2023). Alkaline Metal Intercalates of VSe2 by Electrochemical Intercalation. Zeitschrift Für Anorganische Und Allgemeine Chemie, 650(2), Article 2. https://doi.org/10.1002/zaac.202300165

Kappler, J., Klostermann, S., Lange, P. L., Dyballa, M., Veith, L., Schleid, T., Weil, T., Kästner, J., & Buchmeiser, M. (2023). Sulfur-Composites Derived from Poly(acrylonitrile) and Poly(vinylacetylene) : A Comparative Study on the Role of Pyridinic and Thioamidic Nitrogen. Batteries & Supercaps, 6(3), Article 3. https://doi.org/10.1002/batt.202200522

Karadogan, C., Beck, M., Cyron, P., Riedmüller, K., & Liewald, M. (2023). Zyklische Scherprüfung metallischer Folien : Nutzen von Daten in der Umformtechnik - Potenziale der Digitalisierung. Werkstattstechnik, 113(10), Article 10. https://doi.org/10.37544/1436-4980-2023-10-60

Karoui, A. Y., & Leine, R. I. (2023). Model reduction of a periodically forced slow-fast continuous piecewise linear system. Nonlinear Dynamics, 111(21), Article 21. https://doi.org/10.1007/s11071-023-08858-0

Karsch, M., Van den Eynde, J., & Steelant, J. (2023). Linearly combined transition model based on empirical spot growth correlations. CEAS Space Journal, 1–12. https://doi.org/10.1007/s12567-023-00499-8

Kaschub, V., Wechner, R., Krautmacher, L., Diers, D., Bues, M., Lossack, R., Kloos, U., & Riedel, O. (2023). IDEA - Towards an Interactive Tool that Supports Creativity Sessions in Automotive Product Development. International Conference on Engineering Design, ICED23, 3, Article 3. https://doi.org/10.1017/pds.2023.216

Kaufmann, S., Rößner, P., Renninger, S., Lambarth, M., Raab, M., Stein, J. S., Seithümmer, V., & Birke, K. P. (2023). Techno-Economic Potential of Plasma-Based CO2 Splitting in Power-to-Liquid Plants. Applied Sciences, 13(8), Article 8. https://doi.org/10.3390/app13084839

Kaya Keles, C. S., & Ates, F. (2023). How mechanics of individual muscle-tendon units define knee and ankle joint function in health and cerebral palsy : a narrative review. Frontiers in Bioengineering and Biotechnology, 11, 1287385. https://doi.org/10.3389/fbioe.2023.1287385

Kern, M., Klotz, T., Spiess, M., Mavridis, P., Blümich, B., & Anders, J. (2023). Dead Time-Free Detection of NMR Signals Using Voltage-Controlled Oscillators. Applied Magnetic Resonance, 54(11–12), Article 11–12. https://doi.org/10.1007/s00723-023-01599-8

Kersten, E., Linker, O., Blankenburg, J., Wagner, M., Walther, P., Naumann, S., & Frey, H. (2023). Revealing the Monomer Gradient of Polyether Copolymers Prepared Using N-Heterocyclic Olefins: Metal-Free Anionic versus Zwitterionic Lewis Pair Polymerization. Macromolecular Chemistry and Physics, 224(16), Article 16. https://doi.org/10.1002/macp.202300097

Kesselring, M., Kirsch, M., Wagner, F., & Gloaguen, R. (2023). Knowledge and technology transfer in and beyond mineral exploration. Journal of Innovation and Entrepreneurship, 12, 74. https://doi.org/10.1186/s13731-023-00316-w

Khella, M. S., Schnee, P., Weirich, S., Bui, T., Bröhm, A., Bashtrykov, P., Pleiss, J., & Jeltsch, A. (2023). The T1150A cancer mutant of the protein lysine dimethyltransferase NSD2 can introduce H3K36 trimethylation. The Journal of Biological Chemistry, 299(6), Article 6. https://doi.org/10.1016/j.jbc.2023.104796

Kiemle, S., Heck, K., Coltman, E., & Helmig, R. (2023). Stable Water Isotopologue Fractionation During Soil-Water Evaporation : Analysis Using a Coupled Soil-Atmosphere Model. Water Resources Research, 59(2), Article 2. https://doi.org/10.1029/2022wr032385

Klein, S., Ruchka, P., Klumpp, T., Bartels, N., Steinle, T., & Gießen, H. (2023). Effects of high-power laser radiation on polymers for 3D printing micro-optics. Optical Materials Express, 13(12), Article 12. https://doi.org/10.1364/OME.503929

Kleiner, T., & Hilfer, R. (2023). Convolution on distribution spaces characterized by regularization. Mathematische Nachrichten, 296(5), Article 5. https://doi.org/10.1002/mana.202100330

Kleinert, J., Ehrle, M., Waldmann, A., & Lutz, T. (2023). Wake tail plane interactions for a tandem wing configuration in high-speed stall conditions. CEAS Aeronautical Journal, 1–25. https://doi.org/10.1007/s13272-023-00670-1

Kleinert, J., Stober, J., & Lutz, T. (2023). Numerical simulation of wake interactions on a tandem wing configuration in high-speed stall conditions. CEAS Aeronautical Journal, 14, 171–186. https://doi.org/10.1007/s13272-022-00634-x

Klotz, T., Lehmann, L., Negro, F., & Röhrle, O. (2023). High-density magnetomyography is superior to high-density surface electromyography for motor unit decomposition : a simulation study. Journal of Neural Engineering, 20(4), Article 4. https://doi.org/10.1088/1741-2552/ace7f7

Kneifl, J., Rosin, D., Avci, O., Röhrle, O., & Fehr, J. (2023). Low-dimensional data-based surrogate model of a continuum-mechanical musculoskeletal system based on non-intrusive model order reduction. Archive of Applied Mechanics, 93, 3637–3663. https://doi.org/10.1007/s00419-023-02458-5

Kohl, J., Schweikert, M., Klaas, N., & Lemloh, M.-L. (2023). Intracellular bioaccumulation of the rare earth element Gadolinium in ciliate cells resulting in biogenic particle formation and excretion. Scientific Reports, 13(1), Article 1. https://doi.org/10.1038/s41598-023-32596-3

Kohlhaas, R., Kröker, I., Oladyshkin, S., & Nowak, W. (2023). Gaussian active learning on multi-resolution arbitrary polynomial chaos emulator: concept for bias correction, assessment of surrogate reliability and its application to the carbon dioxide benchmark. Computational Geosciences, 27, 369–389. https://doi.org/10.1007/s10596-023-10199-1

Kousik, S. R., Solodenko, H., YazdanYar, A., Kirchhof, M., Schützendübe, P., Richter, G., Laschat, S., Fyta, M., Schmitz, G., Bill, J., & Atanasova, P. (2023). A Complementary Experimental and Theoretical Approach for Probing the Surface Functionalization of ZnO with Molecular Catalyst Linkers. Advanced Materials Interfaces, 10(26), Article 26. https://doi.org/10.1002/admi.202300399

Krach, D., & Steeb, H. (2023). Comparing methods for permeability computation of porous materials and their limitations. In M. Kaliske (Ed.), 92nd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Nos. 23, 1; Issues 23, 1, p. e202200225). Wiley-VCH. https://doi.org/10.1002/pamm.202200225

Kreher, T., Heim, F., Pross-Brakhage, J., Hemmerling, J., & Birke, K. P. (2023). Comparison of Different Current Collector Materials for In Situ Lithium Deposition with Slurry-Based Solid Electrolyte Layers. Batteries, 9(8), Article 8. https://doi.org/10.3390/batteries9080412

Kreher, T., Jäger, P., Heim, F., & Birke, K. P. (2023). Investigating the Production Atmosphere for Sulfide-Based Electrolyte Layers Regarding Occupational Health and Safety. Batteries, 9(9), Article 9. https://doi.org/10.3390/batteries9090472

Kreis, P., Frank, E., Clauss, B., Bauch, V., Stolpmann, H., Kuske, L., Schneck, T., Koenig, S., & Buchmeiser, M. (2023). Lignin/Poly(vinylpyrrolidone) Multifilament Fibers Dry-Spun from Water as Carbon Fiber Precursors. Macromolecular Materials and Engineering. https://doi.org/10.1002/mame.202300296

Kröker, I., Oladyshkin, S., & Rybak, I. (2023). Global sensitivity analysis using multi-resolution polynomial chaos expansion for coupled Stokes-Darcy flow problems. Computational Geosciences, 27, 805–827. https://doi.org/10.1007/s10596-023-10236-z

Krüger, E. (2023). Extremely Narrow Superconducting Band with Crystal Spin 3/2ℏ in LaH10. Symmetry, 15(8), Article 8. https://doi.org/10.3390/sym15081533

Kumar, S., Bhatti, D., Jones, A. E., & Barz, S. (2023). Experimental entanglement generation using multiport beam splitters. New Journal of Physics, 25, 063027. https://doi.org/10.1088/1367-2630/acdd1a

Kumar, S., Chatterjee, S., Dabhi, C. K., Singh Chauhan, Y., & Amrouch, H. (2023). Nontraditional Design of Dynamic Logics Using FDSOI for Ultra-Efficient Computing. IEEE Journal on Exploratory Solid-State Computational Devices and Circuits, 9(1), Article 1. https://doi.org/10.1109/JXCDC.2023.3269141

Kundu, K., Musso, J. V., Benedikter, M. J., Frey, W., Gugeler, K., Kästner, J., & Buchmeiser, M. (2023). Neutral and Cationic Molybdenum Imido Alkylidene Cyclic Alkyl Amino Carbene (CAAC) Complexes for Olefin Metathesis. Chemistry - a European Journal, 29(52), Article 52. https://doi.org/10.1002/chem.202301818

Käß, M., Werz, M., & Weihe, S. (2023). Residual Stress Formation Mechanisms in Laser Powder Bed Fusion : a Numerical Evaluation. Materials, 16(6), Article 6. https://doi.org/10.3390/ma16062321

Lakhani, H., & Hofmann, J. (2023). Concrete cone failure of post installed fasteners during fire. Ce/Papers, 6(1), Article 1. https://doi.org/10.1002/cepa.1920

Lee, D., Weinhardt, F., Hommel, J., Piotrowski, J., Class, H., & Steeb, H. (2023). Machine learning assists in increasing the time resolution of X-ray computed tomography applied to mineral precipitation in porous media. Scientific Reports, 13(1), Article 1. https://doi.org/10.1038/s41598-023-37523-0

Lee, Y., Karst, J., Ubl, M., Hentschel, M., & Gießen, H. (2023). Dynamic beam control based on electrically switchable nanogratings from conducting polymers. Nanophotonics, 1–7. https://doi.org/10.1515/nanoph-2022-0801

Leipe, V., Hinze, C., Lechler, A., & Verl, A. (2023). Model predictive control for compliant feed drives with offset-free tracking behavior. Production Engineering, 17, 805–814. https://doi.org/10.1007/s11740-023-01206-6

Leisin, M., & Radgen, P. (2023). Holistic Assessment of Decarbonization Pathways of Energy-Intensive Industries Based on Exergy Analysis. Sustainability, 16(1), Article 1. https://doi.org/10.3390/su16010351

Li, B., & Massonne, H.-J. (2023). Chromium in minerals as tracer of the polycyclic evolution of eclogite and related metabasite from the Pohorje Mountains, Slovenian Eastern Alps. Journal of Metamorphic Geology, 42(1), Article 1. https://doi.org/10.1111/jmg.12746

Li, B., Massonne, H.-J., & Yuan, X. (2023). A wealth of P-T-t information from metasediments in the HP-UHP terrane of the Pohorje Mountains, Slovenia, elucidates the evolution of the Eastern Alps. Journal of Metamorphic Geology, 41(9), Article 9. https://doi.org/10.1111/jmg.12740

Li, Y., Bauer, M., Kelz, S., Strack, H., Simolka, J., Mazur, C., Sommer, M. M., Mocker, A., & Srama, R. (2023). Upgrades of a Small Electrostatic Dust Accelerator at the University of Stuttgart. Applied Sciences, 13(7), Article 7. https://doi.org/10.3390/app13074441

Li, Y., Metzner, M., & Schwieger, V. (2023). Driving Environment Inference from POI of Navigation Map : Fuzzy Logic and Machine Learning Approaches. Sensors, 23(22), Article 22. https://doi.org/10.3390/s23229156

Lienstromberg, C., Schiffer, S., & Schubert, R. (2023). A Data-Driven Approach to Viscous Fluid Mechanics: The Stationary Case. Archive for Rational Mechanics and Analysis, 247, 30. https://doi.org/10.1007/s00205-023-01849-w

Lind, J., Hagenlocher, C., Weckenmann, N., Blazquez-Sanchez, D., Weber, R., & Graf, T. (2023). Adjustment of the geometries of the cutting front and the kerf by means of beam shaping to maximize the speed of laser cutting. The International Journal of Advanced Manufacturing Technology, 126, 1527–1538. https://doi.org/10.1007/s00170-023-11215-5

Link, L., & Niewa, R. (2023). Polynator: a tool to identify and qu­antitatively evaluate polyhedra and other shapes in crystal structures. Journal of Applied Crystallography, 56(6), Article 6. https://doi.org/10.1107/S1600576723008476

Liu, J., Atmaca, Ö., & Pott, P. (2023). Needle-Based Electrical Impedance Imaging Technology for Needle Navigation. Bioengineering, 10(5), Article 5. https://doi.org/10.3390/bioengineering10050590

Lißner, J., & Fritzen, F. (2023). Double U-Net: Improved multiscale modeling via fully convolutional neural networks. Proceedings in Applied Mathematics and Mechanics, 23(4), Article 4. https://doi.org/10.1002/pamm.202300205

Locke, R., Haag, T., Hartenbach, I., Kurz, M. V., Blaschkowski, B., & Schleid, T. (2023). Two New Members of the Lanthanoid Bismuth Oxide Oxidosilicates LnBiOSiO4 with Ln=La and Gd. Zeitschrift Für Anorganische Und Allgemeine Chemie, 649(22), Article 22. https://doi.org/10.1002/zaac.202300126

Locke, R., & Schleid, T. (2023). M-type Gd2Si2O7. IUCrData, 8(8), Article 8. https://doi.org/10.1107/S2414314623006545

Locke, R., Weis, M., & Schleid, T. (2023). H-type Ce2Si2O7. IUCrData, 8(7), Article 7. https://doi.org/10.1107/S2414314623005916

Lorenz, M., Seitfudem, G., Randazzo, S., Gueccia, R., Gehring, F., & Prenzel, T. M. (2023). Combining Membrane and Zero Brine Technologies in Waste Acid Treatment for a Circular Economy in the Hot-Dip Galvanizing Industry : A Life Cycle Perspective. Journal of Sustainable Metallurgy, 9, 537–549. https://doi.org/10.1007/s40831-023-00668-3

Ma, H., Gaisser, L., & Riedelbach, S. (2023). Monitoring Pumping Units by Convolutional Neural Networks for Operating Point Estimations. Energies, 16(11), Article 11. https://doi.org/10.3390/en16114392

Mackeprang, J., Bhatti, D., & Barz, S. (2023). Non-adaptive measurement-based quantum computation on IBM Q. Scientific Reports, 13, 15428. https://doi.org/10.1038/s41598-023-41025-4

Mackeprang, J., Bhatti, D., Hoban, M. J., & Barz, S. (2023). The power of qutrits for non-adaptive measurement-based quantum computing. New Journal of Physics, 25, 073007. https://doi.org/10.1088/1367-2630/acdf77

Madadi Varzaneh, H. R., & Steeb, H. (2023). The high cycle fatigue testing of High-Performance Concretes using high frequency excitation. In M. Kaliske (Ed.), 92nd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Vols. 22, 1, p. e202200221). Wiley. https://doi.org/10.1002/pamm.202200221

Madadi Varzaneh, H. R., & Steeb, H. (2023). High-speed fatigue testing of high-performance concretes and parallel frequency sweep characterization. 93rd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), 23, 3, Article 23, 3. https://doi.org/10.1002/pamm.202300262

Mages, A., Willer, L., & Sauer, A. (2023). Vergleich einer Wärmepumpe mit einem Blockheizkraftwerk : Wärmebedarfsdeckung in einer bestehenden industriellen Energieversorgungsinfrastruktur. Werkstattstechnik, 113(11–12), Article 11–12. https://doi.org/10.37544/1436-4980-2023-11-12-41

Maier, F., & Bächtiger, A. (2023). Reflecting on the boundaries of the demos : A virtual deliberative experiment with German citizens. European Journal of Political Research. https://doi.org/10.1111/1475-6765.12629

Maier, J., & Reuß, H.-C. (2023). Design of Zonal E/E Architectures in Vehicles Using a Coupled Approach of k-Means Clustering and Dijkstra’s Algorithm. Energies, 16(19), Article 19. https://doi.org/10.3390/en16196884

Maier, J., & Reuß, H.-C. (2023). Handling System Complexity in Zonal E/E Architectures. Transportation Engineering, 13, 100195. https://doi.org/10.1016/j.treng.2023.100195

Maier, L., Kufferath-Sieberin, L., Pauly, L., Hopp-Hirschler, M., Gresser, G., & Nieken, U. (2023). Constitutive Correlations for Mass Transport in Fibrous Media Based on Asymptotic Homogenization. Materials, 16(5), Article 5. https://doi.org/10.3390/ma16052014

Maier, S., & Fehr, J. C. (2023). Efficient simulation strategy to design a safer motorcycle. Multibody System Dynamics, 1–28. https://doi.org/10.1007/s11044-023-09879-8

Mandl, L., Mielke, A., Seyedpour, S. M., & Ricken, T. (2023). Affine transformations accelerate the training of physics-informed neural networks of a one-dimensional consolidation problem. Scientific Reports, 13, 15566. https://doi.org/10.1038/s41598-023-42141-x

Markert, M., & Garrecht, H. (2023). Einfluss von RC-Gesteinskörnung auf das Druckkriechen eines hochfesten Betons. ce/papers, 6(6), Article 6. https://doi.org/10.1002/cepa.2868

Markthaler, D., & Ghosh, R. (2023). Computational prediction of extracellular loops of the Por39 outer membrane porin of Rhodospirillum rubrum suitable for epitope surface display. Computational and Structural Biotechnology Journal, 21, 2483–2494. https://doi.org/10.1016/j.csbj.2023.03.049

Martynenko, O., Kempter, F., Kleinbach, C., Nölle, L., Lerge, P., Schmitt, S., & Fehr, J. C. (2023). Development and verification of a physiologically motivated internal controller for the open-source extended Hill-type muscle model in LS-DYNA. Biomechanics and Modeling in Mechanobiology, 22, 2003–2032. https://doi.org/10.1007/s10237-023-01748-9

Mast, Y., & Takors, R. (2023). Transferring Bubble Breakage Models Tailored for Euler-Euler Approaches to Euler-Lagrange Simulations. Processes, 11(4), Article 4. https://doi.org/10.3390/pr11041018

Matheou, M., Phocas, M. C., Christoforou, E. G., & Müller, A. (2023). New perspectives in architecture through transformable structures : A simulation study. Frontiers in Built Environment, 9, 1–10. https://doi.org/10.3389/fbuil.2023.1051337

Matter, F., Iroz, I., & Eberhard, P. (2023). Interpolation-based parametric model order reduction of automotive brake systems for frequency-domain analyses. GAMM-Mitteilungen, 46(1), Article 1. https://doi.org/10.1002/gamm.202300002

Matter, F., Iroz, I., & Eberhard, P. (2023). Methods of Model Order Reduction for Coupled Systems Applied to a Brake Disc-Wheel Composite. In M. Kaliske (Ed.), 92nd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Vols. 22, 1, p. e202200323). Wiley. https://doi.org/10.1002/pamm.202200323

Mattes, C., & Weiß, A. (2023). Parallel algorithms for power circuits and the word problem of the Baumslag group. Computational Complexity, 32(2), Article 2. https://doi.org/10.1007/s00037-023-00244-x

Matthies, J. H., Schall, T., Pritzkow, W., Tuttlies, U., & Nieken, U. (2023). Electrically Heated Oxide Ceramic Tubes for High Temperature Reactions. Chemie - Ingenieur - Technik, 95(5), Article 5. https://doi.org/10.1002/cite.202200186

Mauch, M., Hutter, M., & Gundelsweiler, B. (2023). Hybrid Solenoids Based on Magnetic Shape Memory Alloys. Actuators, 12(8), Article 8. https://doi.org/10.3390/act12080328

Mayer, D., Lutz, E., & Widera, A. (2023). Generalized Clausius inequalities in a nonequilibrium cold-atom system. Communications Physics, 6(1), Article 1. https://doi.org/10.1038/s42005-023-01175-3

Maçi, N., & Hofmann, J. (2023). Influence on the Load-Displacement Behaviour of Steel-To-Concrete Connections with Post-Installed Adhesive Anchors. Ce/Papers, 6(1), Article 1. https://doi.org/10.1002/cepa.1929

McTaggart, D., Warren, S. C. C., & Clemens, O. (2023). Reconsidering Anode Materials for Fluoride-Ion Batteries : The Unexpected Roles of Carbide Formation. ChemSusChem, 16(18), Article 18. https://doi.org/10.1002/cssc.202300486

Medeiros Fernandes Negreiros, B., Galdos, A. A., Seitz, L., Noack, M., Schwindt, S., Wieprecht, S., & Haun, S. (2023). A multi-parameter approach to quantify riverbed clogging and vertical hyporheic connectivity. River Research and Applications, 39(8), Article 8. https://doi.org/10.1002/rra.4145

Meinel, J., Kwon, M., Maier, R., Dasari, D., Sumiya, H., Onoda, S., Isoya, J., Vorobev, V., & Wrachtrup, J. (2023). High-resolution nanoscale NMR for arbitrary magnetic fields. Communications Physics, 6, 302. https://doi.org/10.1038/s42005-023-01419-2

Mennle, S., Karl, P., Ubl, M., Ruchka, P., Weber, K., Hentschel, M., Flad, P., & Gießen, H. (2023). Towards fiber-coupled plasmonic perfect absorber superconducting nanowire photodetectors for the near- and mid-infrared. Optics Continuum, 2(9), Article 9. https://doi.org/10.1364/OPTCON.496334

Merkle, R., & Barth, A. (2023). On Properties and Applications of Gaussian Subordinated Lévy Fields. Methodology and Computing in Applied Probability, 25, 1–33. https://doi.org/10.1007/s11009-023-10033-2

Meszaros-Beller, L., Hammer, M., Riede, J., Pivonka, P., Little, J. P., & Schmitt, S. (2023). Effects of geometric individualisation of a human spine model on load sharing : neuro-musculoskeletal simulation reveals significant differences in ligament and muscle contribution. Biomechanics and Modeling in Mechanobiology, 22, 669–694. https://doi.org/10.1007/s10237-022-01673-3

Meszaros-Beller, L., Hammer, M., Schmitt, S., & Pivonka, P. (2023). Effect of neglecting passive spinal structures: a quantitative investigation using the forward-dynamics and inverse-dynamics musculoskeletal approach. Frontiers in Physiology, 14, 1–11. https://doi.org/10.3389/fphys.2023.1135531

Minden, S., Aniolek, M., Noorman, H., & Takors, R. (2023). Mimicked Mixing-Induced Heterogeneities of Industrial Bioreactors Stimulate Long-Lasting Adaption Programs in Ethanol-Producing Yeasts. Genes, 14(5), Article 5. https://doi.org/10.3390/genes14050997

Mohammadi, F., Eggenweiler, E., Flemisch, B., Oladyshkin, S., Rybak, I., Schneider, M., & Weishaupt, K. (2023). A surrogate-assisted uncertainty-aware Bayesian validation framework and its application to coupling free flow and porous-medium flow. Computational Geosciences, 27(4), Article 4. https://doi.org/10.1007/s10596-023-10228-z

Monterrosas Romero, J. M., Alavi, S. K., Koistinen, E. M., & Hong, S. (2023). Optomechanically induced optical trapping system based on photonic crystal cavities. Optics Express, 31(12), Article 12. https://doi.org/10.1364/OE.489688

Mora, A., Xu, R., & Schmauder, S. (2023). Hybrid Smoothed-Particle Hydrodynamics/Finite Element Method Simulation of Water Droplet Erosion on Ductile Metallic Targets. Metals, 13(12), Article 12. https://doi.org/10.3390/met13121937

Morales Oreamuno, M. F., Oladyshkin, S., & Nowak, W. (2023). Information-Theoretic Scores for Bayesian Model Selection and Similarity Analysis : Concept and Application to a Groundwater Problem. Water Resources Research, 59(7), Article 7. https://doi.org/10.1029/2022wr033711

Mossier, P., Appel, D., Beck, A., & Munz, C.-D. (2023). An Efficient hp-Adaptive Strategy for a Level-Set Ghost-Fluid Method. Journal of Scientific Computing, 97, 50. https://doi.org/10.1007/s10915-023-02363-7

Mouris, K., Espinoza, E. A., Schwindt, S., Mohammadi, F., Haun, S., Wieprecht, S., & Oladyshkin, S. (2023). Stability criteria for Bayesian calibration of reservoir sedimentation models. Modeling Earth Systems and Environment, 9, 3643–3661. https://doi.org/10.1007/s40808-023-01712-7

Mulder, B., Schöberl, J., & Birke, K. P. (2023). Thermal Propagation Test Bench with Multi Pouch Cell Setup for Reproducibility Investigations. Batteries, 9(9), Article 9. https://doi.org/10.3390/batteries9090447

Müller, B., Roth, D., & Kreimeyer, M. (2023). Barriers To The Use Of Artificial Intelligence In The Product Development : A Survey Of Dimensions Involved. International Conference on Engineering Design, ICED23, 3, Article 3. https://doi.org/10.1017/pds.2023.76

Müller, M., Ruppert, T., Jazdi-Motlagh, N., & Weyrich, M. (2023). Self-improving situation awareness for human–robot-collaboration using intelligent Digital Twin. Journal of Intelligent Manufacturing, 1–19. https://doi.org/10.1007/s10845-023-02138-9

Müller, S., Maier, D., & Parspour, N. (2023). Inductive Electrically Excited Synchronous Machine for Electrical Vehicles : Design, Optimization and Measurement. Energies, 16(4), Article 4. https://doi.org/10.3390/en16041657

Müller, S., Klein, D., Öhlschläger, F., Roth, J., & Westkämper, E. (2023). Prozessmodellierung in der additiven Fertigung : Molekulardynamische Simulation als Ansatz zur Optimierung der additiven Qualität. Werkstattstechnik, 113(07–08), Article 07–08. https://doi.org/10.37544/1436-4980-2023-07-08-49

Najafi-Haghi, Z. P., & Wunderlich, H.-J. (2023). Identifying Resistive Open Defects in Embedded Cells under Variations. Journal of Electronic Testing, 39, 27–40. https://doi.org/10.1007/s10836-023-06044-z

Nawrath, C., Joos, R., Kolatschek, S., Bauer, S., Pruy, P., Hornung, F., Fischer, J., Huang, J., Vijayan, P., Sittig, R., Jetter, M., Portalupi, S. L., & Michler, P. (2023). Bright Source of Purcell-Enhanced, Triggered, Single Photons in the Telecom C-Band. Advanced Quantum Technologies, 6(11), Article 11. https://doi.org/10.1002/qute.202300111

Niemeyer, S., Veri, F., Dryzek, J. S., & Bächtiger, A. (2023). How Deliberation Happens : Enabling Deliberative Reason. American Political Science Review, 1–18. https://doi.org/10.1017/S0003055423000023

Nikolaev, D. (2023). Bootstrap co-occurrence networks of consonants and the Basic Consonant Inventory. Linguistic Typology, 27(2), Article 2. https://doi.org/10.1515/lingty-2022-0036

Noeren, J., Parspour, N., & Elbracht, L. (2023). An Easily Scalable Dynamic Wireless Power Transfer System for Electric Vehicles. Energies, 16(9), Article 9. https://doi.org/10.3390/en16093936

Nusayer, S. A. A., Schalberger, P., Baur, H., Kleber, F., & Frühauf, N. (2023). High-performance MEMS shutter display with metal-oxide thin-film transistors and optimized MEMS element. Journal of the Society for Information Display, 31(9), Article 9. https://doi.org/10.1002/jsid.1252

Nölle, L., Alfaro, E. H., Martynenko, O. V., & Schmitt, S. (2023). An investigation of tendon strains in jersey finger injury load cases using a finite element neuromuscular human body model. Frontiers in Bioengineering and Biotechnology, 11, 1293705. https://doi.org/10.3389/fbioe.2023.1293705

Nößler, M., Jäger, R., Hunger, D., Reimann, M., Bens, T., Neuman, N. I., Singha Hazari, A., Kaupp, M., Slageren, J. van, & Sarkar, B. (2023). Electrochemistry and Spin-Crossover Behavior of Fluorinated Terpyridine-Based Co(II) and Fe(II) Complexes. European Journal of Inorganic Chemistry, 26(19), Article 19. https://doi.org/10.1002/ejic.202300091

Nößler, M., Neuman, N. I., Böser, L., Jäger, R., Singha Hazari, A., Hunger, D., Pan, Y., Lücke, C., Bens, T., Slageren, J. van, & Sarkar, B. (2023). Spin Crossover and Fluorine-Specific Interactions in Metal Complexes of Terpyridines with Polyfluorocarbon Tails. Chemistry - a European Journal, 29(46), Article 46. https://doi.org/10.1002/chem.202301246

Orozco, L., Svatoš-Ražnjević, H., Wagner, H. J., Abdelaal, M. A. E., Amtsberg, F., Weiskopf, D., & Menges, A. (2023). Advanced Timber Construction Industry : A Quantitative Review of 646 Global Design and Construction Stakeholders. Buildings, 13(9), Article 9. https://doi.org/10.3390/buildings13092287

Paliyenko, Y., Heinz, D., Schiller, C., Tüzün, G.-J., Roth, D., & Kreimeyer, M. (2023). Requirements for a Smart Product-Service System Development Framework. International Conference on Engineering Design, ICED23, 3, Article 3. https://doi.org/10.1017/pds.2023.309

Papendick, M., & Gudat, D. (2023). Reversible Binding of Hydrogen and Styrene Coordination on a Manganese Phosphenium Complex. Chemistry - a European Journal, 29(66), Article 66. https://doi.org/10.1002/chem.202302525

Pathmanathan, N., Öney, S., Becher, M., Sedlmair, M., Weiskopf, D., & Kurzhals, K. (2023). Been There, Seen That: Visualization of Movement and 3D Eye Tracking Data from Real-World Environments. Computer Graphics Forum, 42(3), Article 3. https://doi.org/10.1111/cgf.14838

Petrasch, M. C., & Hofmann, J. (2023). Strengthening of anchor channels on the concrete surface. Ce/Papers, 6(1), Article 1. https://doi.org/10.1002/cepa.1931

Pfeifer, D., Scheid, J., Kneifl, J., & Fehr, J. C. (2023). An improved development process of production plants using digital twins with extended dynamic behaviour in virtual commissioning and control : Simulation@Operations. 93rd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), 23, 3, Article 23, 3. https://doi.org/10.1002/pamm.202300225

Pflumm, S., Wiedemann, Y., Fauser, D., Safaraliyev, J., Lunter, D., Steeb, H., & Ludwigs, S. (2023). Autonomous Adaption of Intelligent Humidity-Programmed Hydrogel Patches for Tunable Stiffness and Drug Release. Advanced Materials Technologies, 8(19), Article 19. https://doi.org/10.1002/admt.202300937

Pflüger, H., Viehhauser, G., & Tumanov, R. (2023). An interface to view collections of visual art. International Journal of Digital Humanities, 1–28. https://doi.org/10.1007/s42803-022-00061-8

Pittiglio, A., Simpson, A., Costalonga Martins, V., & Dahy, H. (2023). Fibrx Rocking Chair: Design and Application of Tailored Timber as an Embedded Frame for Natural Fibre-Reinforced Polymer (NFRP) Coreless Winding. Polymers, 15(3), Article 3. https://doi.org/10.3390/polym15030495

Plaum, B. (2023). Estimation of the Effects of Spurious Modes in Linear Microwave Systems Using a Monte Carlo Algorithm. IEEE Journal of Microwaves, 3(3), Article 3. https://doi.org/10.1109/JMW.2023.3283152

Pourostad, V., & Kuhlmann, U. (2023). Buckling resistance of stiffened panels subjected to constant transverse compression stresses. Ce/Papers, 6(3–4), Article 3–4. https://doi.org/10.1002/cepa.2467

Pérez, M. G., Mindermann, P., Zechmeister, C., Forster, D., Guo, Y., Hügle, S., Kannenberg, F., Balangé, L., Schwieger, V., Middendorf, P., Bischoff, M., Menges, A., Gresser, G. T., & Knippers, J. (2023). Data processing, analysis, and evaluation methods for co-design of coreless filament-wound building systems. Journal of Computational Design and Engineering, 10(4), Article 4. https://doi.org/10.1093/jcde/qwad064

Rajaram, N., Kouroukli, A. G., Bens, S., Bashtrykov, P., & Jeltsch, A. (2023). Development of super-specific epigenome editing by targeted allele-specific DNA methylation. Epigenetics & Chromatin, 16(1), Article 1. https://doi.org/10.1186/s13072-023-00515-5

Reichelt, F., Traub, D., & Maier, T. (2023). Derivation of a Method DNA for the Unified Description of Methodical Procedures in Product Development. International Conference on Engineering Design, ICED23, 3, Article 3. https://doi.org/10.1017/pds.2023.119

Reichle, P., Reichardt, G., Henn, M., Umlauf, G., Barz, J., Riedmüller, K., Liewald, M., & Tovar, G. (2023). Volatile Lubricants Injected Through Laser Drilled Micro Holes Enable Efficiently Hydrocarbon-Free Lubrication for Deep Drawing Processes. International Journal of Precision Engineering and Manufacturing-Green Technology, 10, 875–890. https://doi.org/10.1007/s40684-023-00505-8

Remy, D., Brei, Z., Bruder, D., Remy, J., Buffinton, K., & Gillespie, R. B. (2023). The “Fluid Jacobian” : Modeling force-motion relationships in fluid-driven soft robots. International Journal of Robotics Research. https://doi.org/10.1177/02783649231210592

Rettberg, J., Wittwar, D., Buchfink, P., Brauchler, A., Ziegler, P., Fehr, J. C., & Haasdonk, B. (2023). Port-Hamiltonian fluid–structure interaction modelling and structure-preserving model order reduction of a classical guitar. Mathematical and Computer Modelling of Dynamical Systems, 29(1), Article 1. https://doi.org/10.1080/13873954.2023.2173238

Rist, U., Weinschenk, M., & Wenzel, C. (2023). Investigation of Lagrangian Areas of Minimal Stretching (LAMS) in a turbulent boundary layer. Journal of Fluid Mechanics, 970, A31-1-A31-27. https://doi.org/10.1017/jfm.2023.635

Rosenfelder, M., Ebel, H., & Eberhard, P. (2023). Force-based organization and control scheme for the non-prehensile cooperative transportation of objects. Robotica, 42(2), Article 2. https://doi.org/10.1017/S0263574723001704

Roth, C., Hartmann, J., Schiewe, C., & Staudacher, S. (2023). Asymmetric Flow Phenomena Affecting the Characterization of the Control Plant of an Altitude Test Facility for Aircraft Engines. Symmetry, 15(10), Article 10. https://doi.org/10.3390/sym15101918

Rudolph, D., Wylezich, T., Netzsch, P., Blaschkowski, B., Hoeppe, H. A., Goldner, P., Kunkel, N., Hoslauer, J.-L., & Schleid, T. (2023). Synthesis and Crystal Structure of the Europium(II) Hydride Oxide Iodide Eu5H2O2I4 Showing Blue-Green Luminescence. International Journal of Molecular Sciences, 24(19), Article 19. https://doi.org/10.3390/ijms241914969

Ruopp, J., & Kuhlmann, U. (2023). Studies on the load-carrying behaviour of steel-to-concrete joints with headed studs for normal and shear loads. Steel Construction, 16(4), Article 4. https://doi.org/10.1002/stco.202300015

Röder, B., Ebel, H., & Eberhard, P. (2023). Towards intelligent design assistants for planar multibody mechanisms. 93rd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), 23, 4, Article 23, 4. https://doi.org/10.1002/pamm.202300060

Römer, T., Schulz, K., Wu, Y., Wenzel, C., & Rist, U. (2023). Delay of laminar-turbulent transition by counter-rotating cylindrical roughness elements in a laminar flat plate boundary layer. Experiments in Fluids, 64, 42. https://doi.org/10.1007/s00348-023-03581-3

Rückle, L., Budde, J. G., Jong, J. de, Hahn, F., Pappa, A., & Barz, S. (2023). Experimental anonymous conference key agreement using linear cluster states. Physical Review Research, 5(3), Article 3. https://doi.org/10.1103/PhysRevResearch.5.033222

Saeed, M. S., Falter, J., Dausch, V., Wagner, M., Kreimeyer, M., & Eisenbart, B. (2023). Artificial Intelligence Techniques For Improving Cylindrical Shrink-Fit Shaft-Hub Couplings. International Conference on Engineering Design, ICED23, 3, Article 3. https://doi.org/10.1017/pds.2023.65

Saeidi, S., Anderson, M. D., & Davidova, M. (2023). Kindness in Architecture : The Multispecies Co-Living and Co-Design. Buildings, 13(8), Article 8. https://doi.org/10.3390/buildings13081931

Saha, S., Müller, D., & Clark, A. G. G. (2023). Mechanosensory feedback loops during chronic inflammation. Frontiers in Cell and Developmental Biology, 11, 1225677. https://doi.org/10.3389/fcell.2023.1225677

Samad, A., Kiseleva, O., Holst, C. C., Wegener, R., Kossmann, M., Meusel, G., Fiehn, A., Erbertseder, T., Becker, R., Roiger, A., Stanislawsky, P., Klemp, D., Emeis, S., Kalthoff, N., & Vogt, U. (2023). Meteorological and air quality measurements in a city region with complex terrain : influence of meteorological phenomena. Meteorologische Zeitschrift, 32(4), Article 4. https://doi.org/10.1127/metz/2023/1124

Sayed Afaque, M., Ni, K., & Amrouch, H. (2023). Modeling and Investigating Total Ionizing Dose Impact on FeFET. IEEE Journal on Exploratory Solid-State Computational Devices and Circuits, 9(2), Article 2. https://doi.org/10.1109/JXCDC.2023.3325706

Schauffler, N. (2023). Alternation preferences affect focus marking in German and English differently. Frontiers in Psychology, 14, 1–19. https://doi.org/10.3389/fpsyg.2023.1192004

Schellander, Y., Winter, M., Schamber, M., Munkes, F., Schalberger, P., Kübler, H., Pfau, T., & Frühauf, N. (2023). Ultraviolet photodetectors and readout based on a-IGZO semiconductor technology. Journal of the Society for Information Display, 31(5), Article 5. https://doi.org/10.1002/jsid.1202

Schelle, J. T., Lepoittevin, W., & Hauer, B. (2023). Enhanced Semi-Preparative Biotransformation of Cumene Dioxygenase: From Analytical Scale to Product Isolation. Chemie - Ingenieur - Technik, 95(4), Article 4. https://doi.org/10.1002/cite.202200162

Schlaich, A., Tyagi, S., Kesselheim, S., Sega, M., & Holm, C. (2023). Renormalized charge and dielectric effects in colloidal interactions : a numerical solution of the nonlinear Poisson-Boltzmann equation for unknown boundary conditions. The European Physical Journal. E, Soft Matter, 46(9), Article 9. https://doi.org/10.1140/epje/s10189-023-00334-2

Schmid, R., & Xiong, X. (2023). China’s environmental solutions. Applied Microbiology and Biotechnology, 107, 987–1002. https://doi.org/10.1007/s00253-022-12340-z

Schnee, P., Weirich, S., & Jeltsch, A. (2023). Charakterisierung der Substratspezifität von Protein-Methyltransferasen. Biospektrum, 29, 249–251. https://doi.org/10.1007/s12268-023-1930-y

Schneider, A., Curado, C., Lystbaek, T. B., Osuna, S., & Hauer, B. (2023). Verwendung der Struktur und Dynamik der Squalen-Hopen-Zyklase für die (−)-Ambroxid Produktion. Angewandte Chemie, 135(22), Article 22. https://doi.org/10.1002/ange.202301607

Schneider, A., Curado, C., Lystbaek, T. B., Osuna, S., & Hauer, B. (2023). Harnessing the Structure and Dynamics of the Squalene-Hopene Cyclase for (-)-Ambroxide Production. Angewandte Chemie, 62(22), Article 22. https://doi.org/10.1002/anie.202301607

Schneider, M., Meier, V., Stehle, T., & Möhring, H.-C. (2023). SmartLab vernetzt Produktionsmaschinen : Aufbau einer digitalen Prozesskette in einer bestehenden Produktionsumgebung. Werkstattstechnik, 113(01–02), Article 01–02. https://doi.org/10.37544/1436-4980-2023-01-02-40

Schneider, Y., Guski, V., Sahin, A. O. O., Schmauder, S., Kadkhodapour, J., Hufert, J., Grebhardt, A., & Bonten, C. (2023). Investigation of Auxetic Structural Deformation Behavior of PBAT Polymers Using Process and Finite Element Simulation. Polymers, 15(14), Article 14. https://doi.org/10.3390/polym15143142

Schneider, Y., Guski, V., Schmauder, S., Kadkhodapour, J., Hufert, J., Grebhardt, A., & Bonten, C. (2023). Deformation Behavior Investigation of Auxetic Structure Made of Poly(butylene adipate-co-terephthalate) Biopolymers Using Finite Element Method. Polymers, 15(7), Article 7. https://doi.org/10.3390/polym15071792

Schnell, P., Haag, P., & Jünger, H. C. (2023). Implementation of Digital Technologies in Construction Companies : Establishing a Holistic Process which Addresses Current Barriers. Businesses, 3(1), Article 1. https://doi.org/10.3390/businesses3010001

Schnepf, U., Moers-Meßmer, M. A. L. von, & Brümmer, F. (2023). A practical primer for image-based particle measurements in microplastic research. Microplastics and Nanoplastics, 3, 16. https://doi.org/10.1186/s43591-023-00064-4

Schopf, T., Weihe, S., Daniel, T., Smaga, M., & Beck, T. (2023). Fatigue behavior and lifetime assessment of an austenitic stainless steel in the VHCF regime at ambient and elevated temperatures. Fatigue & Fracture of Engineering Materials & Structures, 46(5), Article 5. https://doi.org/10.1111/ffe.13958

Schuff, H., Vanderlyn, L., Adel, H., & Vu, N. T. (2023). How to do human evaluation : A brief introduction to user studies in NLP. Natural Language Engineering, 29(5), Article 5. https://doi.org/10.1017/S1351324922000535

Schwarz, A., Keim, J., Chiocchetti, S., & Beck, A. (2023). A Reinforcement Learning Based Slope Limiter for Second-Order Finite Volume Schemes. In M. Kaliske (Ed.), 92nd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Nos. 23, 1; Issues 23, 1, p. e202200207). Wiley-VCH. https://doi.org/10.1002/pamm.202200207

Schwindt, S., Medrano, S. C., Mouris, K., Beckers, F., Haun, S., Nowak, W., Wieprecht, S., & Oladyshkin, S. (2023). Bayesian Calibration Points to Misconceptions in Three-Dimensional Hydrodynamic Reservoir Modeling. Water Resources Research, 59(3), Article 3. https://doi.org/10.1029/2022WR033660

Schäfer, M. C., Petter, M., Hartenbach, I., Locke, R., Zhang, S., Wickleder, C., & Schleid, T. (2023). Luminescence Properties of Y3FSi3O10:Ln3+ (Ln = Eu, Tb, Er) with Thalenite-Type Host Lattice and Crystal Structure of Tm3FSi3O10. Crystals, 13(3), Article 3. https://doi.org/10.3390/cryst13030511

Schäfter, D., Wischnat, J., Tesi, L., De Sousa, J. A., Little, E., McGuire, J., Mas-Torrent, M., Rovira, C., Veciana, J., Tuna, F., Crivillers, N., & Slageren, J. van. (2023). Molecular One- and Two-Qubit Systems with Very Long Coherence Times. Advanced Materials, 35(38), Article 38. https://doi.org/10.1002/adma.202302114

Schönherr, M., Rühl, H., Günther, T., Zimmermann, A., & Gundelsweiler, B. (2023). Adhesion-Induced Demolding Forces of Hard Coated Microstructures Measured with a Novel Injection Molding Tool. Polymers, 15(5), Article 5. https://doi.org/10.3390/polym15051285

Schüler, F., & Petrik, D. (2023). Measuring network effects of digital industrial platforms: towards a balanced platform performance management. Information Systems and E-Business Management, 21, 863–911. https://doi.org/10.1007/s10257-023-00655-x

Seel, F., Lutz, T., & Krämer, E. (2023). Numerical study of the unsteady blade root aerodynamics of a 2 MW wind turbine equipped with vortex generators. Wind Energy Science, 8(9), Article 9. https://doi.org/10.5194/wes-8-1369-2023

Seggern, N. von, Oehlsen, N., Moudrakovski, I., & Stegbauer, L. (2023). Photomodulation of the Mechanical Properties and Photo-Actuation of Chitosan-Based Thin Films Modified with an Azobenzene-Derivative. Small, 2308939. https://doi.org/10.1002/smll.202308939

Seyedpour, S. M., Henning, C., Kirmizakis, P., Herbrandt, S., Ickstadt, K., Doherty, R., & Ricken, T. (2023). Uncertainty with Varying Subsurface Permeabilities Reduced Using Coupled Random Field and Extended Theory of Porous Media Contaminant Transport Models. Water, 15(1), Article 1. https://doi.org/10.3390/w15010159

Seyedpour, S. M., Thom, A., & Takors, R. (2023). Simulation of Contaminant Transport through the Vadose Zone : A Continuum Mechanical Approach within the Framework of the Extended Theory of Porous Media (eTPM). Water, 15(2), Article 2. https://doi.org/10.3390/w15020343

Sharba, S., Herb, J., & Fritzen, F. (2023). Reduced order homogenization of thermoelastic materials with strong temperature dependence and comparison to a machine-learned model. Archive of Applied Mechanics, 93, 2855–2876. https://doi.org/10.1007/s00419-023-02411-6

Siebler, L., Rathje, T., Calandri, M., Stergiaropoulos, K., Donker, T., Richter, B., Spahn, C., & Nusseck, M. (2023). A coupled experimental and statistical approach for an assessment of SARS-CoV-2 infection risk at indoor event locations. BMC Public Health, 23(1), Article 1. https://doi.org/10.1186/s12889-023-16154-0

Skarmoutsos, G., & Kuhlmann, U. (2023). Seismic behaviour of dissipative beam-to-column steel and steel-concrete composite joints. Ce/Papers, 6(3–4), Article 3–4. https://doi.org/10.1002/cepa.2363

Soltani, K., Seyedpour, S. M., Ricken, T., & Rezazadeh, G. (2023). Transient high-frequency spherical wave propagation in porous medium using fractional calculus technique. Acta Mechanica. https://doi.org/10.1007/s00707-023-03780-3

Somers, P., Holdenried-Krafft, S., Zahn, J., Schüle, J., Veil, C., Harland, N., Walz, S., Stenzl, A., Sawodny, O., Tarin Sauer, C., & Lensch, H. P. A. (2023). Cystoscopic depth estimation using gated adversarial domain adaptation. Biomedical Engineering Letters, 13, 141–151. https://doi.org/10.1007/s13534-023-00261-3

Speth, M., Riedmüller, K., & Liewald, M. (2023). Study on mixing behaviour of aluminium-ceramic powder having high SiC volume fractions up to 50 vol.%. Functional Composite Materials, 4, 8. https://doi.org/10.1186/s42252-023-00045-z

Stach, C., Eichler, R. K., & Schmidt, S. (2023). A Recommender Approach to Enable Effective and Efficient Self-Service Analytics in Data Lakes. Datenbank-Spektrum, 23, 123–132. https://doi.org/10.1007/s13222-023-00443-4

Stein, F., Nößler, M., Hazari, A. S., Böser, L., Walter, R., Liu, H., Klemm, E., & Sarkar, B. (2023). Ruthenium Complexes of Polyfluorocarbon Substituted Terpyridine and Mesoionic Carbene Ligands: An Interplay in CO2 Reduction. Chemistry - a European Journal, 29(31), Article 31. https://doi.org/10.1002/chem.202300405

Stein, F., Suhr, S., Hazari, A. S., Walter, R., Nößler, M., & Sarkar, B. (2023). Azide-Substituted 1,2,3-Triazolium Salts as Useful Synthetic Synthons: Access to Triazenyl Radicals and Staudinger Type Reactivity. Chemistry - a European Journal, 29(34), Article 34. https://doi.org/10.1002/chem.202300771

Steinhausen, C., Gerber, V., Stierle, R., Preusche, A., Dreizler, A., Groß, J., Weigand, B., & Lamanna, G. (2023). Characterisation of the transient mixing behaviour of evaporating near-critical droplets. Frontiers in Physics, 11, 1192416. https://doi.org/10.3389/fphy.2023.1192416

Stempniewski, L., & Kuhlmann, U. (2023). Composite bridges with cracked concrete deck spanning between transverse beams under fatigue shear loading. Ce/Papers, 6(1), Article 1. https://doi.org/10.1002/cepa.1914

Straub, A., Karch, G. K., Steigerwald, J., Sadlo, F., Weigand, B., & Ertl, T. (2023). Visual analysis of interface deformation in multiphase flow. Journal of Visualization, 26(6), Article 6. https://doi.org/10.1007/s12650-023-00939-x

Strohbeck, P., Eggenweiler, E., & Rybak, I. (2023). A Modification of the Beavers-Joseph Condition for Arbitrary Flows to the Fluid-porous Interface. Transport in Porous Media, 147, 605–628. https://doi.org/10.1007/s11242-023-01919-3

Ströbel, M., Kiefer, L., Pross-Brakhage, J., Hemmerling, J., Finster, P., Ziebert, C., & Birke, K. P. (2023). High Flashpoint and Eco-Friendly Electrolyte Solvent for Lithium-Ion Batteries. Batteries, 9(7), Article 7. https://doi.org/10.3390/batteries9070348

Ströbel, M., Kumar, V., & Birke, K. P. (2023). Temperature Estimation in Lithium-Ion Cells Assembled in Series-Parallel Circuits Using an Artificial Neural Network Based on Impedance Data. Batteries, 9(9), Article 9. https://doi.org/10.3390/batteries9090458

Stöckl, Y., Tait, E. J., Frey, W., Wegner, S., Claasen, B., Zens, A., & Laschat, S. (2023). Enantioenriched Boron C,N-Chelates via Chirality Transfer. Chemistry - a European Journal, 29(41), Article 41. https://doi.org/10.1002/chem.202301324

Stölzle, M., Roth, D., & Kreimeyer, M. (2023). Classification of Methodologies for Design For Circular Economy Based on a Literature Study. International Conference on Engineering Design, ICED23, 3, Article 3. https://doi.org/10.1017/pds.2023.93

Suditsch, M., Ricken, T., & Wagner, A. (2023). Patient-specific simulation of brain tumour growth and regression. In M. Kaliske (Ed.), 92nd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Nos. 23, 1; Issues 23, 1, p. e202200213). Wiley-VCH. https://doi.org/10.1002/pamm.202200213

Tahir, M., & Tenbohlen, S. (2023). Transformer Winding Fault Classification and Condition Assessment Based on Random Forest Using FRA. Energies, 16(9), Article 9. https://doi.org/10.3390/en16093714

Tandler, T., Hirth, T., Eisseler, R., Stehle, T., & Möhring, H.-C. (2023). Einsatz von KI bei der Prozessvorhersage für Bandsägen : Einsatz von künstlicher Intelligenz zur Vorhersage von Prozesskräften beim Bandsägen. Werkstattstechnik, 113(01–02), Article 01–02. https://doi.org/10.37544/1436-4980-2023-01-02-33

Tesi, L., Stemmler, F., Winkler, M., Liu, S. S. Y., Das, S., Sun, X., Zharnikov, M., Ludwigs, S., & van Slageren, J. (2023). Modular Approach to Creating Functionalized Surface Arrays of Molecular Qubits. Advanced Materials, 35(10), Article 10. https://doi.org/10.1002/adma.202208998

Thomas, B., Roger, J., Gunnell, Y., & Ashraf, S. (2023). A method for evaluating population and infrastructure exposed to natural hazards: tests and results for two recent Tonga tsunamis. Geoenvironmental Disasters, 10, 4. https://doi.org/10.1186/s40677-023-00235-8

Tinsel, E.-F., Lechler, A., & Riedel, O. (2023). Kompensation fehlender Komponenten in der Simulation. Werkstattstechnik, 113(5), Article 5. https://doi.org/10.37544/1436-4980-2023-05-17

Tischler, I., Schlaich, A., & Holm, C. (2023). Disentanglement of Surface and Confinement Effects for Diene Metathesis in Mesoporous Confinement. ACS Omega, 9(1), Article 1. https://doi.org/10.1021/acsomega.3c06195

Tomalka, A. (2023). Eccentric muscle contractions : from single muscle fibre to whole muscle mechanics. Pflügers Archiv, 475, 421–435. https://doi.org/10.1007/s00424-023-02794-z

Tourian, M., Papa, F., Elmi, O., Sneeuw, N., Kitambo, B., Tshimanga, R. M., Paris, A., & Calmant, S. (2023). Current availability and distribution of Congo Basin’s freshwater resources. Communications Earth & Environment, 4(1), Article 1. https://doi.org/10.1038/s43247-023-00836-z

Tovey, S. J., Zills, F., Torres-Herrador, F., Lohrmann, C., Brückner, M., & Holm, C. (2023). MDSuite: comprehensive post-processing tool for particle simulations. Journal of Cheminformatics, 15, 19. https://doi.org/10.1186/s13321-023-00687-y

Trautwein, A., Prokosch, T., Senatore, G., Blandini, L., & Bischoff, M. (2023). Analytical and numerical case studies on tailoring stiffness for the design of structures with displacement control. Frontiers in Built Environment, 9, 01–11. https://doi.org/10.3389/fbuil.2023.1135117

Trivedi, Z. M., Gehweiler, D., Wychowaniec, J. K., Ricken, T., Gueorguiev, B., Wagner, A., & Röhrle, O. (2023). A continuum mechanical porous media model for vertebroplasty : Numerical simulations and experimental validation. Biomechanics and Modeling in Mechanobiology, 22, 1253–1266. https://doi.org/10.1007/s10237-023-01715-4

Trivedi, Z. M., Gehweiler, D., Wychowaniec, J. K., Ricken, T., Gueorguiev-Rüegg, B., Wagner, A., & Röhrle, O. (2023). Analysing the bone cement flow in the injection apparatus during vertebroplasty. In M. Kaliske (Ed.), 92nd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Nos. 23, 1; Issues 23, 1, p. e202200295). Wiley-VCH. https://doi.org/10.1002/pamm.202200295

Trüdinger, E.-M., & Ziller, C. (2023). Setting limits to tolerance : an experimental investigation of individual reactions to extremism and violence. Frontiers in Political Science, 5, 1–11. https://doi.org/10.3389/fpos.2023.1000511

Tschöpe, M., & Rauhut, G. (2023). Spectroscopic Characterization of Diazophosphane : A Candidate for Astrophysical Observations. The Astrophysical Journal, 949(1), Article 1. https://doi.org/10.3847/1538-4357/acc9ad

Turco, F., Traub, C., Gaißer, S., Burgdorf, J. C., Klinkner, S., & Fasoulas, S. (2023). Analysis of Collision Avoidance Manoeuvres Using Aerodynamic Drag for the Flying Laptop Satellite. Aerotecnica Missili & Spazio, 103, 61–71. https://doi.org/10.1007/s42496-023-00183-4

Töpler, J., Buchholz, L., Lukas, J., & Kuhlmann, U. (2023). Guidelines for a Finite Element Based Design of Timber Structures and Their Exemplary Application on Modelling of Beech LVL. Buildings, 13(2), Article 2. https://doi.org/10.3390/buildings13020393

Tüzün, G.-J., Roth, D., & Kreimeyer, M. (2023). Function Integration in Additive Manufacturing : a Review of Approaches. International Conference on Engineering Design, ICED23, 3, Article 3. https://doi.org/10.1017/pds.2023.201

Ulmer, A., Veit, S., Erdemann, F., Freund, A., Lösch, M., Teleki, A., Zeidan, A. A., & Takors, R. (2023). A Two-Compartment Fermentation System to Quantify Strain-Specific Interactions in Microbial Co-Cultures. Bioengineering, 10(1), Article 1. https://doi.org/10.3390/bioengineering10010103

Vetter, A., & Brettschneider, F. (2023). Demokratiezufriedenheit und Institutionenvertrauen in Baden-Württemberg : Satisfaction with democracy and political support in Baden-Württemberg. Zeitschrift Für Politikwissenschaft, 33, 583–607. https://doi.org/10.1007/s41358-023-00358-2

Vetter-Gindele, J., Bachofer, F., Braun, A., Uwayezu, E., Rwanyiziri, G., & Eltrop, L. (2023). Bottom-up assessment of household electricity consumption in dynamic cities of the Global South-Evidence from Kigali, Rwanda. Frontiers in Sustainable Cities, 5, 1130758. https://doi.org/10.3389/frsc.2023.1130758

Veyskarami, M., Michaelkowski, C., Bringedal, C., & Helmig, R. (2023). Droplet Formation, Growth and Detachment at the Interface of a Coupled Free-FLow-Porous Medium System : A New Model Development and Comparison. Transport in Porous Media, 149, 389–419. https://doi.org/10.1007/s11242-023-01944-2

Villanueva Zacarias, A. G., Reimann, P., Weber, C., & Mitschang, B. (2023). AssistML : an approach to manage, recommend and reuse ML solutions. International Journal of Data Science and Analytics, 16(4), Article 4. https://doi.org/10.1007/s41060-023-00417-5

Vogl, S. (2023). Mixed Methods Longitudinal Research. Forum Qualitative Sozialforschung, 24(1), Article 1. https://doi.org/10.17169/fqs-24.1.4012

Vogl, S., Valls, O., Kogler, R., & Astleithner, F. (2023). The dreams they are a-changin’: Mixed-methods longitudinal research on young people’s patterns of orientation. Österreichische Zeitschrift Für Soziologie, 48, 309–331. https://doi.org/10.1007/s11614-023-00540-4

Voigt, M., Roth, D., & Kreimeyer, M. (2023). Decision Support for Defining Adaptive Façade Design Goals in the Early Design Phase. Energies, 16(8), Article 8. https://doi.org/10.3390/en16083411

Voigt, M., Roth, D., & Kreimeyer, M. (2023). Systematic Classification Of Adaptive Façades : Preparing a Database. International Conference on Engineering Design, ICED23, 3, Article 3. https://doi.org/10.1017/pds.2023.330

Voss, C., Petzold, F., & Rudolph, S. (2023). Graph transformation in engineering design : an overview of the last decade. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 37, e5. https://doi.org/10.1017/S089006042200018X

Völter, J.-S., Ricken, T., & Röhrle, O. (2023). About the applicability of the theory of porous media for the modelling of non-isothermal material injection into porous structures. In M. Kaliske (Ed.), 92nd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Nos. 23, 1; Issues 23, 1, p. e202200070). Wiley-VCH. https://doi.org/10.1002/pamm.202200070

Wagner, A., Sonntag, A., Reuschen, S., Nowak, W., & Ehlers, W. (2023). Hydraulically induced fracturing in heterogeneous porous media using a TPM-phase-field model and geostatistics. In M. Kaliske (Ed.), 92nd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) (Nos. 23, 1; Issues 23, 1, p. e202200118). Wiley-VCH. https://doi.org/10.1002/pamm.202200118

Wagner, S., Treptow, K., Weser, S., Drexler, M., Sahakalkan, S., Eberhardt, W., Günther, T., Pruß, C., Herkommer, A., & Zimmermann, A. (2023). Injection Molding of Encapsulated Diffractive Optical Elements. Micromachines, 14(6), Article 6. https://doi.org/10.3390/mi14061223

Waldmann, A., Ehrle, M. C., Kleinert, J., Yorita, D., & Lutz, T. (2023). Mach and Reynolds number effects on transonic buffet on the XRF-1 transport aircraft wing at flight Reynolds number. Experiments in Fluids, 64, 102. https://doi.org/10.1007/s00348-023-03642-7

Walter, T., Stutzig, N., & Siebert, T. (2023). Active exoskeleton reduces erector spinae muscle activity during lifting. Frontiers in Bioengineering and Biotechnology, 11, 1–12. https://doi.org/10.3389/fbioe.2023.1143926

Walz, D., Göbel, R., Werz, M., & Weihe, S. (2023). Effect of Weld Length on Strength, Fatigue Behaviour and Microstructure of Intersecting Stitch-Friction Stir Welded AA 6016-T4 Sheets. Materials, 16(2), Article 2. https://doi.org/10.3390/ma16020533

Wang, R., Becker, D., & Hobiger, T. (2023). Stochastic modeling with robust Kalman filter for real-time kinematic GPS single-frequency positioning. GPS Solutions, 27, 153. https://doi.org/10.1007/s10291-023-01479-5

Wanner, D. M., Becker, P. M., Suhr, S., Wannenmacher, N., Ziegler, S., Herrmann, J., Willig, F., Gabler, J., Jangid, K., Schmid, J., Hans, A. C., Frey, W., Sarkar, B., Kästner, J., & Peters, R. (2023). Cooperative Lewis Acid-1,2,3-Triazolium-Aryloxide Catalysis: Pyrazolone Addition to Nitroolefins as Entry to Diaminoamides. Angewandte Chemie International Edition, 62(36), Article 36. https://doi.org/10.1002/anie.202307317

Wanner, D. M., Becker, P. M., Suhr, S., Wannenmacher, N., Ziegler, S., Herrmann, J., Willig, F., Gabler, J., Jangid, K., Schmid, J., Hans, A. C., Frey, W., Sarkar, B., Kästner, J., & Peters, R. (2023). Kooperative Lewis-Säure-1,2,3-Triazolium-Aryloxid-Katalyse: Addition von Pyrazolonen an Nitroolefine als Zugang zu Diaminoamiden. Angewandte Chemie, 135(36), Article 36. https://doi.org/10.1002/ange.202307317

Weder, B., Barzen, J., Beisel, M., & Leymann, F. (2023). Provenance-Preserving Analysis and Rewrite of Quantum Workflows for Hybrid Quantum Algorithms. SN Computer Science, 4, 233. https://doi.org/10.1007/s42979-022-01625-9

Weidig, J., & Kühnl, C. (2023). Improving the effectiveness of personalized recommendations through attributional cues. Psychology & Marketing, 40(12), Article 12. https://doi.org/10.1002/mar.21914

Weißhaupt, D., Funk, H. S., Oehme, M., Bloos, D., Berkmann, F., Seidel, L., Fischer, I. A., & Schulze, J. (2023). High mobility Ge 2DHG based MODFETs for low-temperature applications. Semiconductor Science and Technology, 38(3), Article 3. https://doi.org/10.1088/1361-6641/acb22f

Welsch, F., Kervio, E. J., Tremmel, P., & Richert, C. (2023). Prolinyl Nucleotides Drive Enzyme-Free Genetic Copying of RNA. Angewandte Chemie. International Edition, 62(41), Article 41. https://doi.org/10.1002/anie.202307591

Welsch, F., Kervio, E. J., Tremmel, P., & Richert, C. (2023). Prolinyl Nucleotides Drive Enzyme-Free Genetic Copying of RNA. Angewandte Chemie, 135(41), Article 41. https://doi.org/10.1002/ange.202307591

Welzel, S., Burmeister, J., Höppchen, O., & Nieken, U. (2023). Validation of an Extended Kinetic Model of Free-Radical N-Vinylpyrrolidone Polymerization. Macromolecular Reaction Engineering, 17(2), Article 2. https://doi.org/10.1002/mren.202200075

Welzel, S., Zander, C., & Nieken, U. (2023). Wall Layer Formation in Continuously Operated Tubular Reactors for Free-Radical Polymerizations. Chemie - Ingenieur - Technik, 95(5), Article 5. https://doi.org/10.1002/cite.202200195

Wende, M., Drozella, J., & Herkommer, A. (2023). Fast bidirectional vector wave propagation method showcased on targeted noise reduction in imaging fiber bundles using 3D-printed micro optics. Optics Express, 31(18), Article 18. https://doi.org/10.1364/OE.497244

Wendlandt, T., Koch, C., Britz, B., Liedek, A., Schmidt, N., Werner, S., Gleba, Y., Vahidpour, F., Welden, M., Poghossian, A., Schöning, M. J., Eber, F. J., Jeske, H., & Wege, C. (2023). Facile Purification and Use of Tobamoviral Nanocarriers for Antibody-Mediated Display of a Two-Enzyme System. Viruses, 15(9), Article 9. https://doi.org/10.3390/v15091951

Wenz, F., Maas, O., Arnold, M., Lutz, T., & Krämer, E. (2023). Assessment of low-frequency aeroacoustic emissions of a wind turbine under rapidly changing wind conditions based on an aero-servo-elastic CFD simulation. Wind Energy, 26(8), Article 8. https://doi.org/10.1002/we.2826

Wenzel, M., Tsirlin, A. A., Capitani, F., Chan, Y. T., Ortiz, B. R., Wilson, S. D., Dressel, M., & Uykur, E. (2023). Pressure evolution of electron dynamics in the superconducting kagome metal CsV3Sb5. Npj Quantum Materials, 8(45), Article 45. https://doi.org/10.1038/s41535-023-00577-4

Wenzel, P. M., Fensterle, E., & Radgen, P. (2023). Catalyzing Cooling Tower Efficiency : A Novel Energy Performance Indicator and Functional Unit including Climate and Cooling Demand Normalization. Sustainability, 15(21), Article 21. https://doi.org/10.3390/su152115454

Wenzel, P. M., Mühlen, M., & Radgen, P. (2023). Free Cooling for Saving Energy : Technical Market Analysis of Dry, Wet, and Hybrid Cooling Based on Manufacturer Data. Energies, 16(9), Article 9. https://doi.org/10.3390/en16093661

Wenzel, P. M., & Radgen, P. (2023). Extending effectiveness to efficiency: Comparing energy and environmental assessment methods for a wet cooling tower. Journal of Industrial Ecology, 27(3), Article 3. https://doi.org/10.1111/jiec.13396

Werkle, K. T., Trage, C., Wolf, J., & Möhring, H.-C. (2023). Generalizable process monitoring for FFF 3D printing with machine vision. Production Engineering, 1–9. https://doi.org/10.1007/s11740-023-01234-2

Wild, M., Mast, Y., & Takors, R. (2023). Revisiting Basics of kLa Dependency on Aeration in Bubble Columns: a Is Surprisingly Stable. Chemie - Ingenieur - Technik, 95(4), Article 4. https://doi.org/10.1002/cite.202200165

Wimmer, E. J., Klostermann, S. V., Ringenberg, M., Kästner, J., & Estes, D. P. (2023). Oxo-Bridged Zr Dimers as Well-defined Models of Oxygen Vacancies on ZrO2. European Journal of Inorganic Chemistry, 26(12), Article 12. https://doi.org/10.1002/ejic.202200709

Wolf, M., Werum, K., Eberhardt, W., Günther, T., & Zimmermann, A. (2023). Injection Compression Molding of LDS-MID for Millimeter Wave Applications. Journal of Manufacturing and Materials Processing, 7(5), Article 5. https://doi.org/10.3390/jmmp7050184

Wolf, M., Werum, K., Günther, T., Schleeh, L., Eberhardt, W., & Zimmermann, A. (2023). Analysis of Tempering Effects on LDS-MID and PCB Substrates for HF Applications. Journal of Manufacturing and Materials Processing, 7(4), Article 4. https://doi.org/10.3390/jmmp7040139

Wu, H., Veyskarami, M., Schneider, M., & Helmig, R. (2023). A New Fully Implicit Two-Phase Pore-Network Model by Utilizing Regularization Strategies. Transport in Porous Media, 151, 1–26. https://doi.org/10.1007/s11242-023-02031-2

Yang, Y., & Schwieger, V. (2023). Patch-based M3C2 : Towards lower-uncertainty and higher-resolution deformation analysis of 3D point clouds. International Journal of Applied Earth Observation and Geoinformation, 125(December), Article December. https://doi.org/10.1016/j.jag.2023.103535

Zavoleas, Y., Stevens, P. R., Johnstone, J., & Davidová, M. (2023). More-Than-Human Perspective in Indigenous Cultures : Holistic Systems Informing Computational Models in Architecture, Urban and Landscape Design towards the Post-Anthropocene Epoch. Buildings, 13(1), Article 1. https://doi.org/10.3390/buildings13010236

Zechmeister, C., Gil Pérez, M., Dambrosio, N., Knippers, J., & Menges, A. (2023). Extension of Computational Co-Design Methods for Modular, Prefabricated Composite Building Components Using Bio-Based Material Systems. Sustainability, 15(16), Article 16. https://doi.org/10.3390/su151612189

Ziegler, F., Bruckner, J., Nowakowski, M., Bauer, M., Probst, P., Atwi, B., & Buchmeiser, M. (2023). Macrocyclization of Dienes under Confinement with Cationic Tungsten Imido/Oxo Alkylidene N-Heterocyclic Carbene Complexes. ChemCatChem, 15(21), Article 21. https://doi.org/10.1002/cctc.202300871

Zimmer, M., Bunz, E., Ehring, T., Kaiser, B., Kienzlen, A., Schlüter, H., & Zürn, M. (2023). In Vivo Assessment of Shear Wave Propagation in Pennate Muscles Using an Automatic Ultrasound Probe Alignment System. IEEE Open Journal of Engineering in Medicine and Biology, 4, 259–267. https://doi.org/10.1109/OJEMB.2023.3338090

Zimmer, M., Kleiser, B., Marquetand, J., & Ates, F. (2023). Characterization of Muscle Weakness Due to Myasthenia Gravis Using Shear Wave Elastography. Diagnostics, 13(6), Article 6. https://doi.org/10.3390/diagnostics13061108

Zirwes, T., Sontheimer, M., Zhang, F., Abdelsamie, A., Hernández Pérez, F. E. ., Stein, O. T., Im, H. G., Kronenburg, A., & Bockhorn, H. (2023). Assessment of Numerical Accuracy and Parallel Performance of OpenFOAM and its Reacting Flow Extension EBIdnsFoam. Flow, Turbulence and Combustion, 111, 567–602. https://doi.org/10.1007/s10494-023-00449-8

Ziwes, M., Ruopp, J., & Kuhlmann, U. (2023). Studies on steel-to-concrete joints with concentrated loading conditions. Ce/Papers, 6(1), Article 1. https://doi.org/10.1002/cepa.1932

Zuo, W., Malekshahi Byranvand, M., Kodalle, T., Zohdi, M., Lim, J., Carlsen, B., Friedlmeier, T. M., Kot, M., Das, C., Flege, J. I., Zong, W., Abate, A., Sutter-Fella, C. M., Li, M., & Saliba, M. (2023). Coordination Chemistry as a Universal Strategy for a Controlled Perovskite Crystallization. Advanced Materials, 35(39), Article 39. https://doi.org/10.1002/adma.202302889

Öney, S., Pathmanathan, N., Becher, M., Sedlmair, M., Weiskopf, D., & Kurzhals, K. (2023). Visual Gaze Labeling for Augmented Reality Studies. Computer Graphics Forum, 42(3), Article 3. https://doi.org/10.1111/cgf.14837

Ackermann, A. C., Fischer, M., Wick, A., Carosella, S., Bronwyn, L. F., & Middendorf, P. (2022). Mechanical, Thermal and Electrical Properties of Epoxy Nanocomposites with Amine-Functionalized Reduced Graphene Oxide via Plasma Treatment. Journal of Composites Science, 6(6), Article 6. https://doi.org/10.3390/jcs6060153

Adam, S., Bräcker, J., Klingel, V., Osteresch, B., Radde, N. E., Brockmeyer, J., Bashtrykov, P., & Jeltsch, A. (2022). Flanking sequences influence the activity of TET1 and TET2 methylcytosine dioxygenases and affect genomic 5hmC patterns. Communications Biology, 5, 92. https://doi.org/10.1038/s42003-022-03033-4

Altmeppen, J., Sommerfeld, H., Koch, C., & Staudacher, S. (2022). Experimental and numerical investigation into the effect of surface roughness on particle rebound. Frontiers in Mechanical Engineering, 1–16. https://doi.org/10.3389/fmech.2022.918708

Arasteh-Khoshbin, O., Seyedpour, S. M., & Ricken, T. (2022). The effect of Caspian Sea water on mechanical properties and durability of concrete containing rice husk ash, nano SiO2SiO2, and nano Al2O3Al2O3. Scientific Reports, 12(1), Article 1. https://doi.org/10.1038/s41598-022-24304-4

Aslani, V., Guerra, F., Steinitz, A., Wilhelm, P., & Haist, T. (2022). Averaging approaches for highly accurate image-based edge localization. OSA Continuum, 1(4), Article 4. https://doi.org/10.1364/OPTCON.453537

Baumann, M., Koch, C., & Staudacher, S. (2022). Application of Neural Networks and Transfer Learning to Turbomachinery Heat Transfer. Aerospace, 9(2), Article 2. https://doi.org/10.3390/aerospace9020049

Beck, A., Vogt, F., Hägele, L., Rupp, S., & Zibek, S. (2022). Optimization and Kinetic Modeling of a Fed-Batch Fermentation for Mannosylerythritol Lipids (MEL) Production With Moesziomyces aphidis. Frontiers in Bioengineering and Biotechnology, 10(May), Article May. https://doi.org/10.3389/fbioe.2022.913362

Beißwanger, R., Weckerle, M., Pruß, C., & Reichelt, S. (2022). Interferometric radius of curvature measurements : an environmental error treatment. Optics Express, 30(14), Article 14. https://doi.org/10.1364/OE.461972

Benn, M., & Stoy, C. (2022). BIM for CREM: Exploring the Benefit of Building Information Modelling for Facility Management in Corporate Real Estate Management. Buildings, 12(4), Article 4. https://doi.org/10.3390/buildings12040400

Berkmann, F., Augel, L., Hack, M., Kawaguchi, Y., Weißhaupt, D., Fischer, I. A., & Schulze, J. (2022). Optimization of Fully Integrated Al Nanohole Array-Based Refractive Index Sensors for Use With a LED Light Source. IEEE Photonics Journal, 14(3), Article 3. https://doi.org/10.1109/JPHOT.2022.3177354

Beura, C. P., Beltle, M., Wenger, P., & Tenbohlen, S. (2022). Experimental Analysis of Ultra-High-Frequency Signal Propagation Paths in Power Transformers. Energies, 15(8), Article 8. https://doi.org/10.3390/en15082766

Bienert, F., Graf, T., & Abdou Ahmed, M. (2022). Theoretical investigation on the elimination of the period chirp by deliberate substrate deformations. Optics Express, 30(13), Article 13. https://doi.org/10.1364/OE.458636

Bienert, F., Loescher, A., Röcker, C., Graf, T., & Abdou Ahmed, M. (2022). Experimental analysis on CPA-free thin-disk multipass amplifiers operated in a helium-rich atmosphere. Optics Express, 30(21), Article 21. https://doi.org/10.1364/OE.469697

Blandini, L., Haase, W., Weidner, S., Böhm, M., Burghardt, T., Roth, D., Sawodny, O., & Sobek, W. (2022). D1244: Design and Construction of the First Adaptive High-Rise Experimental Building. Frontiers in Built Environment, 8(June), Article June. https://doi.org/10.3389/fbuil.2022.814911

Blum, M., Derad, L., & Killinger, A. (2022). Deposition of Fluoresceine-Doped HAp Coatings via High-Velocity Suspension Flame Spraying. Coatings, 12(9), Article 9. https://doi.org/10.3390/coatings12091251

Brock, J., Erhardt, J., Eisler, S. A., & Hörning, M. (2022). Optimization of Mechanosensitive Cross-Talk between Matrix Stiffness and Protein Density : Independent Matrix Properties Regulate Spreading Dynamics of Myocytes. Cells, 11(13), Article 13. https://doi.org/10.3390/cells11132122

Bröhm, A., Schoch, T., Dukatz, M., Graf, N., Dorscht, F., Mantai, E., Adam, S., Bashtrykov, P., & Jeltsch, A. (2022). Methylation of recombinant mononucleosomes by DNMT3A demonstrates efficient linker DNA methylation and a role of H3K36me3. Communications Biology, 5, 192. https://doi.org/10.1038/s42003-022-03119-z

Brümmer, F., Schnepf, U., Resch, J., Jemmali, R., Abdi, R., Kamel, H. M., Bonten, C., & Müller, R.-W. (2022). In situ laboratory for plastic degradation in the Red Sea. Scientific Reports, 12, 11956. https://doi.org/10.1038/s41598-022-15310-7

Buettner, S. M., Schneider, C., König, W., Nulty, H., Piccolroaz, C., & Sauer, A. (2022). How Do German Manufacturers React to the Increasing Societal Pressure for Decarbonisation? Applied Sciences, 12(2), Article 2. https://doi.org/10.3390/app12020543

Byranvand, M. M., Kodalle, T., Zuo, W., Friedlmeier, T. M., Abdelsamie, M., Hong, K., Zia, W., Perween, S., Clemens, O., Sutter-Fella, C. M., & Saliba, M. (2022). One-Step Thermal Gradient- and Antisolvent-Free Crystallization of All-Inorganic Perovskites for Highly Efficient and Thermally Stable Solar Cells. Advanced Science, 9(23), Article 23. https://doi.org/10.1002/advs.202202441

Bárdossy, A., Kilsby, C., Birkinshaw, S., Wang, N., & Anwar, F. (2022). Is Precipitation Responsible for the Most Hydrological Model Uncertainty? Frontiers in Water, 4, 836554. https://doi.org/10.3389/frwa.2022.836554

Böhm, C., Werz, M., & Weihe, S. (2022). Practical Approach to Eliminate Solidification Cracks by Supplementing AlMg4.5Mn0.7 with AlSi10Mg Powder in Laser Powder Bed Fusion. Materials, 15(2), Article 2. https://doi.org/10.3390/ma15020572

Bücher, T., & Amrouch, H. (2022). Modeling TPU Thermal Maps Under Superlattice Thermoelectric Cooling. IEEE Access, 10, 21970–21978. https://doi.org/10.1109/ACCESS.2022.3152195

Bücher, T., Huber, R., Eschenbaum, C., Mertens, A., Lemmer, U., & Amrouch, H. (2022). Printed temperature sensor array for high-resolution thermal mapping. Scientific Reports, 12, 14231. https://doi.org/10.1038/s41598-022-18321-6

Büttner, S. M. (2022). Roadmap to Neutrality : What Foundational Questions Need Answering to Determine One’s Ideal Decarbonisation Strategy. Energies, 15(9), Article 9. https://doi.org/10.3390/en15093126

Cerda, C., Guenat, S., Egerer, M., & Fischer, L. K. (2022). Home Food Gardening : Benefits and Barriers During the COVID-19 Pandemic in Santiago, Chile. Frontiers in Sustainable Food Systems, 6, 841386. https://doi.org/10.3389/fsufs.2022.841386

Chacon Mateos, M., Laquai, B., Vogt, U., & Stubenrauch, C. (2022). Evaluation of a low-cost dryer for a low-cost optical particle counter. Atmospheric Measurement Techniques, 15(24), Article 24. https://doi.org/10.5194/amt-15-7395-2022

Chan, Y. T., Uykur, E., Belyanchikov, M. A., Martin, D., Abalmasov, V. A., Thomas, V., Zhukova, E. S., & Gorshunov, B. (2022). Effect of hydrostatic pressure on the quantum paraelectric state of dipolar coupled water molecular network. Physical Review Research, 4(2), Article 2. https://doi.org/10.1103/PhysRevResearch.4.023205

Chen, Y., Guo, F., Schlipf, D., & Cheng, P. W. (2022). Four-dimensional wind field generation for the aeroelastic simulation of wind turbines with lidars. Wind Energy Science, 7(2), Article 2. https://doi.org/10.5194/wes-7-539-2022

Clifton, A., Barber, S., Stökl, A., Frank, H., & Karlsson, T. (2022). Research challenges and needs for the deployment of wind energy in hilly and mountainous regions. Wind Energy Science, 7(6), Article 6. https://doi.org/10.5194/wes-7-2231-2022

Dambeebo, D., Dakyaga, F., & Derbile, E. K. (2022). Navigating complexities towards sustainable food crops production : local practices for climate change adaptation in rural Ghana. Discover Sustainability, 3, 11. https://doi.org/10.1007/s43621-022-00078-7

Dasari, D., Yang, S., Chakrabarti, A., Finkler, A., Kurizki, G., & Wrachtrup, J. (2022). Anti-Zeno purification of spin baths by quantum probe measurements. Nature Communications, 13, 7527. https://doi.org/10.1038/s41467-022-35045-3

Davidová, M., Sharma, S., McMeel, D., & Loizides, F. (2022). Co-De|GT: The Gamification and Tokenisation of More-Than-Human Qualities and Values. Sustainability, 14(7), Article 7. https://doi.org/10.3390/su14073787

Donzelli, M., Ferber, T., Vanita, V., Waidha, A. I., Müller, P., Mellin, M., Hausbrand, R., Jaegermann, W., & Clemens, O. (2022). On the Surface Modification of LLZTO with LiF via a Gas-Phase Approach and the Characterization of the Interfaces of LiF with LLZTO as Well as PEO+LiTFSI. Materials, 15(19), Article 19. https://doi.org/10.3390/ma15196900

Dukatz, M., Dittrich, M., Stahl, E., Adam, S., Mendoza, A. de, Bashtrykov, P., & Jeltsch, A. (2022). DNA methyltransferase DNMT3A forms interaction networks with the CpG site and flanking sequence elements for efficient methylation. The Journal of Biological Chemistry, 298(10), Article 10. https://doi.org/10.1016/j.jbc.2022.102462

Eisenmann, A., Streubel, T., & Rudion, K. (2022). Power Quality Mitigation via Smart Demand-Side Management Based on a Genetic Algorithm. Energies, 15(4), Article 4. https://doi.org/10.3390/en15041492

Eisseler, R., Gutsche, D., Maucher, C., & Möhring, H.-C. (2022). Inverse Determination of Johnson-Cook Parameters of Additively Produced Anisotropic Maraging Steel. Materials, 15(1), Article 1. https://doi.org/10.3390/ma15010026

El Hachem, A., Seidel, J., Imbery, F., Junghänel, T., & Bardossy, A. (2022). Technical Note: Space–time statistical quality control of extreme precipitation observations. Hydrology and Earth System Sciences, 26(23), Article 23. https://doi.org/10.5194/hess-26-6137-2022

Elpelt-Wessel, I., Reiser, M., Morrison, D., & Kranert, M. (2022). Emission Determination by Three Remote Sensing Methods in Two Release Trials. Atmosphere, 13(1), Article 1. https://doi.org/10.3390/atmos13010053

Engelfried, M., Baumann, M., & Bauer, F. (2022). Three-dimensional structure-based approach for the analysis of macroscopic lead structures on sealing counterfaces. International Journal of Metrology and Quality Engineering, 13, 2. https://doi.org/10.1051/ijmqe/2022003

Eppinger, E., Gröning, J. A. D., & Stolz, A. (2022). Chemoenzymatic enantioselective synthesis of phenylglycine and phenylglycine amide by direct coupling of the Strecker synthesis with a nitrilase reaction. Frontiers in Catalysis, 01–16. https://doi.org/10.3389/fctls.2022.952944

Faulhaber, A., Krächan, C., & Haist, T. (2022). Depth from axial differential perspective. Optics Continuum, 1(1), Article 1. https://doi.org/10.1364/OPTCON.451413

Fendel, V., Kranert, M., Maurer, C., Garcés Sánchez, G., Huang, J., & Ramakrishna, G. (2022). The Impact of Using Co-Compost on Resource Management and Resilience of Smallholder Agriculture in South India. Environments, 9(11), Article 11. https://doi.org/10.3390/environments9110143

Fendel, V., Kranert, M., Maurer, C., Garcés-Sánchez, G., Huang, J., & Ramakrishna, G. (2022). Stakeholder Assessment on Closing Nutrient Cycles through Co-Recycling of Biodegradable Household Kitchen Waste and Black Water between Rural and Urban Areas in South India. Recycling, 7(4), Article 4. https://doi.org/10.3390/recycling7040049

Fendel, V., Maurer, C., Kranert, M., Huang, J., & Schäffner, B. (2022). The Potential of the Co-Recycling of Secondary Biodegradable Household Resources Including Wild Plants to Close Nutrient and Carbon Cycles in Agriculture in Germany. Sustainability, 14(9), Article 9. https://doi.org/10.3390/su14095277

Feuchtmüller, O., Hörl, L., & Bauer, F. (2022). An Empirical Study on the Friction of Reciprocating Rod Seals at Predefined Lubrication Conditions and Shear Rates. Lubricants, 10(4), Article 4. https://doi.org/10.3390/lubricants10040056

Fischer, F., Birk, A., Somers, P., Frenner, K., Tarin Sauer, C., & Herkommer, A. (2022). FeaSel-Net: A Recursive Feature Selection Callback in Neural Networks. Machine Learning and Knowledge Extraction, 4(4), Article 4. https://doi.org/10.3390/make4040049

Flöß, M., Steinle, T., Gerhardt, I., & Gießen, H. (2022). Femtosecond tunable light source with variable repetition rate between 640 kHz and 41 MHz with a 130 dB temporal pulse contrast ratio. Optics Express, 30(1), Article 1. https://doi.org/10.1364/OE.439226

Foglszinger, J., Denisenko, A., Kornher, T., Schreck, M., Knolle, W., Yavkin, B., Kolesov, R., & Wrachtrup, J. (2022). TR12 centers in diamond as a room temperature atomic scale vector magnetometer. Npj Quantum Information, 8, 65. https://doi.org/10.1038/s41534-022-00566-8

Frey, Y., Franz-Wachtel, M., Macek, B., & Olayioye, M. A. (2022). Proteasomal turnover of the RhoGAP tumor suppressor DLC1 is regulated by HECTD1 and USP7. Scientific Reports, 12, 5036. https://doi.org/10.1038/s41598-022-08844-3

Gaugler, L. K., Mast, Y., Fitschen, J., Hofmann, S., Schlüter, M., & Takors, R. (2022). Scaling-down biopharmaceutical production processes via a single multi-compartment bioreactor (SMCB). Engineering in Life Sciences, 23(1), Article 1. https://doi.org/10.1002/elsc.202100161

Gil Pérez, M., Zechmeister, C., Kannenberg, F., Mindermann, P., Balangé, L., Guo, Y., Hügle, S., Gienger, A., Forster, D., Bischoff, M., Tarin Sauer, C., Middendorf, P., Schwieger, V., Gresser, G. T., Menges, A., & Knippers, J. (2022). Computational co-design framework for coreless wound fibre–polymer composite structures. Journal of Computational Design and Engineering, 9(2), Article 2. https://doi.org/10.1093/jcde/qwab081

Gillich, A., & Hufendiek, K. (2022). Asset Profitability in the Electricity Sector : an Iterative Approach in a Linear Optimization Model. Energies, 15(12), Article 12. https://doi.org/10.3390/en15124387

Gronle, A., Pruss, C., & Herkommer, A. M. (2022). Misalignment of spheres, aspheres and freeforms in optical measurement systems. Optics Express, 30(2), Article 2. https://doi.org/10.1364/OE.443420

Grundler, A., Dazer, M., & Herzig, T. (2022). Statistical Power Analysis in Reliability Demonstration Testing : The Probability of Test Success. Applied Sciences, 12(12), Article 12. https://doi.org/10.3390/app12126190

Grün, J., Feldmeth, S., & Bauer, F. (2022). Multiphase Computational Fluid Dynamics of Rotary Shaft Seals. Lubricants, 10(12), Article 12. https://doi.org/10.3390/lubricants10120347

Guenat, S., & et al. (2022). Meeting sustainable development goals via robotics and autonomous systems. Nature Communications, 13, 3559. https://doi.org/10.1038/s41467-022-31150-5

Guma, G., Bucher, P., Letzgus, P., Lutz, T., & Wüchner, R. (2022). High-fidelity aeroelastic analyses of wind turbines in complex terrain : fluid–structure interaction and aerodynamic modeling. Wind Energy Science, 7(4), Article 4. https://doi.org/10.5194/wes-7-1421-2022

Gyawali, D. R., & Bárdossy, A. (2022). Development and parameter estimation of snowmelt models using spatial snow-cover observations from MODIS. Hydrology and Earth System Sciences, 26(12), Article 12. https://doi.org/10.5194/hess-26-3055-2022

Günther, T., Werum, K., Müller, E., Wolf, M., & Zimmermann, A. (2022). Characterization of Wire-Bonding on LDS Materials and HF-PCBs for High-Frequency Applications. Journal of Manufacturing and Materials Processing, 6(1), Article 1. https://doi.org/10.3390/jmmp6010009

Hagenlocher, C., Siebert, R., Taschke, B., Wieske, S., Haußer, A., & Morrison, M. (2022). ER stress-induced cell death proceeds independently of the TRAIL-R2 signaling axis in pancreatic β cells. Cell Death Discovery, 8, 34. https://doi.org/10.1038/s41420-022-00830-y

Hartlieb, S., Schober, C., Haist, T., & Reichelt, S. (2022). Accurate single image depth detection using multiple rotating point spread functions. Optics Express, 30(13), Article 13. https://doi.org/10.1364/OE.458541

Haub, M., Günther, T., Bogner, M., & Zimmermann, A. (2022). Use of PtC Nanotips for Low-Voltage Quantum Tunneling Applications. Micromachines, 13(7), Article 7. https://doi.org/10.3390/mi13071019

Heiland, J., & Unger, B. (2022). Identification of Linear Time-Invariant Systems with Dynamic Mode Decomposition. Mathematics, 10(3), Article 3. https://doi.org/10.3390/math10030418

Heitkämpfer, J., Suckaneck, S., de la Concepción, J. G., Kästner, J., & Molpeceres, G. (2022). The reactivity of pyridine in cold interstellar environments : the reaction of pyridine with the CN radical. Frontiers in Astronomy and Space Sciences, 9, 1020635. https://doi.org/10.3389/fspas.2022.1020635

Hermann, S., & Fehr, J. C. (2022). Documenting research software in engineering science. Scientific Reports, 12, 6567. https://doi.org/10.1038/s41598-022-10376-9

Hirmer, P., Breitenbücher, U., Del Gaudio, D., Képes, K., Leymann, F., Mitschang, B., Mormul, M., & Przytarski, D. (2022). Situation-aware adaptation of choreographies : The DiStOPT approach. Frontiers in the Internet of Things, 1, 1054963. https://doi.org/10.3389/friot.2022.1054963

Holder, D., Weber, R., & Graf, T. (2022). Analytical Model for the Depth Progress during Laser Micromachining of V-Shaped Grooves. Micromachines, 13(6), Article 6. https://doi.org/10.3390/mi13060870

Holfelder, B., Klotzbier, T. J., & Schott, N. (2022). Dual-Task Interference in Children with Down Syndrome and Chronological and Mental Age-Matched Healthy Controls. Children, 9(2), Article 2. https://doi.org/10.3390/children9020191

Jakstis, K., Dubovik, M., Laikari, A., Mustajärvi, K., Wendling, L., & Fischer, L. K. (2022). Informing the design of urban green and blue spaces through an understanding of Europeans’ usage and preferences. People and Nature, 5(1), Article 1. https://doi.org/10.1002/pan3.10419

Jamali Dogahe, K., Guski, V., Mlikota, M., Schmauder, S., Holweger, W., Spille, J., Mayer, J., Schwedt, A., Görlach, B., & Wranik, J. (2022). Simulation of the Fatigue Crack Initiation in SAE 52100 Martensitic Hardened Bearing Steel during Rolling Contact. Lubricants, 10(4), Article 4. https://doi.org/10.3390/lubricants10040062

Johann, K. S., Reißing, A., & Bonten, C. (2022). Comparative Analysis of the Solid Conveying of Regrind, Virgin and Powdery Polyolefins in Single-Screw Extrusion. Journal of Manufacturing and Materials Processing, 6(3), Article 3. https://doi.org/10.3390/jmmp6030056

Karl, P., Mennle, S., Ubl, M., Hentschel, M., Flad, P., Yang, J.-W., Peng, T.-Y., Lu, Y.-J., & Gießen, H. (2022). Tunable infrared high absorbing polarization independent niobium nitride plasmonic perfect absorber nanowire photodetectors. Optics Express, 12(7), Article 7. https://doi.org/10.1364/OME.458242

Karst, J., Lee, Y., Flöß, M., Ubl, M., Ludwigs, S., Hentschel, M., & Gießen, H. (2022). Electro-active metaobjective from metalenses-on-demand. Nature Communications, 13(1), Article 1. https://doi.org/10.1038/s41467-022-34494-0

Kaya Keles, C. S., & Ates, F. (2022). Botulinum Toxin Intervention in Cerebral Palsy-Induced Spasticity Management : Projected and Contradictory Effects on Skeletal Muscles. Toxins, 14(11), Article 11. https://doi.org/10.3390/toxins14110772

Keller, J., Scagnetti Goyarzu, C. M., & Albrecht, S. (2022). The Relevance of Recyclability for the Life Cycle Assessment of Packaging Based on Design for Life Cycle. Sustainability, 14(7), Article 7. https://doi.org/10.3390/su14074076

Kempf, D., & Munz, C.-D. (2022). Zonal direct-hybrid aeroacoustic simulation of trailing edge noise using a high-order discontinuous Galerkin spectral element method. Acta Acustica, 6, 39. https://doi.org/10.1051/aacus/2022030

Klotzbier, T. J., Schott, N., & Almeida, Q. J. (2022). Profiles of Motor-Cognitive Interference in Parkinson’s Disease—The Trail-Walking-Test to Discriminate between Motor Phenotypes. Brain Sciences, 12(9), Article 9. https://doi.org/10.3390/brainsci12091217

Klotzbier, T. J., Holfelder, B., & Schott, N. (2022). Associations of Motor Performance and Executive Functions: Comparing Children with Down Syndrome to Chronological and Mental Age-Matched Controls. Children, 9(1), Article 1. https://doi.org/10.3390/children9010073

Klotzbier, T. J., Park, S.-Y., Blümer, V., & Schott, N. (2022). Effect of Intermittent Exercise on Performance in 3D Multiple Objects Tracking in Children, Young and Older Adults : A Pilot Study. Journal of Integrative Neuroscience, 21(4), Article 4. https://doi.org/10.31083/j.jin2104122

Kolbe, N., Hexemer, L., Bammert, L.-M., Loewer, A., Lukáčová-Medvid’ová, M., & Legewie, S. (2022). Data-based stochastic modeling reveals sources of activity bursts in single-cell TGF-β signaling. PLOS Computational Biology, June, 1–29. https://doi.org/10.1371/journal.pcbi.1010266

Korn, V., & Pluhackova, K. (2022). Not sorcery after all: Roles of multiple charged residues in membrane insertion of gasdermin-A3. Frontiers in Cell and Developmental Biology, 1–12. https://doi.org/10.3389/fcell.2022.958957

Kosow, H., Wassermann, S., Bartke, S., Goede, P., Grimski, D., Imbert, I., Jenssen, T., Laukel, O., Proske, M., Protzer, J., Schumacher, K. P., Siedentop, S., Wagner-Endres, S., Wittekind, J., & Zimmermann, K. (2022). Addressing Goal Conflicts : New Policy Mixes for Commercial Land Use Management. Land, 11(6), Article 6. https://doi.org/10.3390/land11060795

Krämer, K., Brock, J., & Heyer, A. G. (2022). Interaction of Nitrate Assimilation and Photorespiration at Elevated CO2. Frontiers in Plant Science, 13(July), Article July. https://doi.org/10.3389/fpls.2022.897924

Krüger, E. (2022). Magnetic Bands Producing a Monoclinic Magnetic Structure in NiO, FeO, MnO, and a Tetragonal One in CoO. Symmetry, 14(7), Article 7. https://doi.org/10.3390/sym14071285

Lapin, A., Perfahl, H., Jain, H. V., & Reuss, M. (2022). Integrating a dynamic central metabolism model of cancer cells with a hybrid 3D multiscale model for vascular hepatocellular carcinoma growth. Scientific Reports, 12, 12373. https://doi.org/10.1038/s41598-022-15767-6

Laue, F., Adegun, O. B., & Ley, A. (2022). Heat Stress Adaptation within Informal, Low-Income Urban Settlements in Africa. Sustainability, 14(13), Article 13. https://doi.org/10.3390/su14138182

Lee, D., Karadimitriou, N., Ruf, M., & Steeb, H. (2022). Detecting micro fractures : a comprehensive comparison of conventional and machine-learning-based segmentation methods. Solid Earth, 13(9), Article 9. https://doi.org/10.5194/se-13-1475-2022

Leis, A., Traunecker, D., Weber, R., & Graf, T. (2022). Tuning the Hardness of Produced Parts by Adjusting the Cooling Rate during Laser-Based Powder Bed Fusion of AlSi10Mg by Adapting the Process Parameters. Metals, 12(12), Article 12. https://doi.org/10.3390/met12122000

Letzgus, P., Guma, G., & Lutz, T. (2022). Computational fluid dynamics studies on wind turbine interactions with the turbulent local flow field influenced by complex topography and thermal stratification. Wind Energy Science, 7(4), Article 4. https://doi.org/10.5194/wes-7-1551-2022

Li, N., Friedrich, R., & Schieberle, C. (2022). Exposure of Individuals in Europe to Air Pollution and Related Health Effects. Frontiers in Public Health, 10, 871144. https://doi.org/10.3389/fpubh.2022.871144

Locke, R. J. C., Goerigk, F. C., Schäfer, M. J., Höppe, H. A., & Schleid, T. (2022). Synthesis, crystal structures and spectroscopic properties of pure YSb2O4Br and YSb2O4Cl as well as Eu3+- and Tb3+-doped samples. RSC Advances, 12(2), Article 2. https://doi.org/10.1039/D1RA08382A

Lorenz, M., Klein, M., Hartmann, J., Koch, C., & Staudacher, S. (2022). Prediction of Compressor Blade Erosion Experiments in a Cascade Based on Flat Plate Specimen. Frontiers in Mechanical Engineering, 8, 925395. https://doi.org/10.3389/fmech.2022.925395

Lylina, N., Wang, C.-H., & Wunderlich, H.-J. (2022). A Complete Design-for-Test Scheme for Reconfigurable Scan Networks. Journal of Electronic Testing, 38, 603–621. https://doi.org/10.1007/s10836-022-06038-3

Lüdecke, F. D., Schmid, M., Rehe, E., Selvam, S. P., Parspour, N., & Cheng, P. W. (2022). Numerical Aspects of a Two-Way Coupling for Electro-Mechanical Interactions : A Wind Energy Perspective. Energies, 15(3), Article 3. https://doi.org/10.3390/en15031178

Mahfouz, M. Y., & Cheng, P.-W. (2022). A passively self-adjusting floating wind farm layout to increase the annual energy production. Wind Energy, 26(3), Article 3. https://doi.org/10.1002/we.2797

Mally, L., Werz, M., & Weihe, S. (2022). Feasibility Study on Additive Manufacturing of Ferritic Steels to Meet Mechanical Properties of Safety Relevant Forged Parts. Materials, 15(1), Article 1. https://doi.org/10.3390/ma15010383

Mangold, J., Silberhorn, D., Möbs, N., Dzikus, N., Hoelzen, J., Zill, T., & Strohmayer, A. (2022). Refueling of LH2 Aircraft-Assessment of Turnaround Procedures and Aircraft Design Implication. Energies, 15(7), Article 7. https://doi.org/10.3390/en15072475

Marzouk, M. A., Salheen, M. A., & Fischer, L. K. (2022). Functionalizing building envelopes for greening and solar energy: Between theory and the practice in Egypt. Frontiers in Environmental Science, 01–27. https://doi.org/10.3389/fenvs.2022.1056382

Meer, J. V. der, Ertel, B., & Seifert, U. (2022). Thermodynamic Inference in Partially Accessible Markov Networks : A Unifying Perspective from Transition-Based Waiting Time Distributions. Physical Review. X, 12(3), Article 3. https://doi.org/10.1103/PhysRevX.12.031025

Meinel, J., Vorobyov, V., Wang, P., Yavkin, B., Pfender, M., Sumiya, H., Onoda, S., Isoya, J., Liu, R.-B., & Wrachtrup, J. (2022). Quantum nonlinear spectroscopy of single nuclear spins. Nature Communications, 13, 5318. https://doi.org/10.1038/s41467-022-32610-8

Miller, M., Rudion, K., Nägele, H., & Schnaars, J. (2022). A grid reinforcement approach for an optimized planning of high-voltage distribution grids under consideration of line loading indicators. IET Renewable Power Generation, 16(9), Article 9. https://doi.org/10.1049/rpg2.12442

Miller, O., Gericke, O., Nigl, D., Kovaleva, D., & Blandini, L. (2022). Simulation-Based Investigations of the Load-Bearing Behavior of Concrete Hollow Sphere Slabs Exposed to Fire. Fire, 5(6), Article 6. https://doi.org/10.3390/fire5060197

Minden, S., Aniolek, M., Noorman, H., & Takors, R. (2022). Performing in spite of starvation: How Saccharomyces cerevisiae maintains robust growth when facing famine zones in industrial bioreactors. Microbial Biotechnology, 16(1), Article 1. https://doi.org/10.1111/1751-7915.14188

Minden, S., Aniolek, M., Sarkizi, C., Hajian, S., Teleki, A., Zerrer, T., Delvigne, F., Gulik, W. van, Deshmukh, A., Noorman, H., & Takors, R. (2022). Monitoring Intracellular Metabolite Dynamics in Saccharomyces cerevisiae during Industrially Relevant Famine Stimuli. Metabolites, 12(3), Article 3. https://doi.org/10.3390/metabo12030263

Mindermann, P., Gil Pérez, M., Knippers, J., & Gresser, G. T. (2022). Investigation of the Fabrication Suitability, Structural Performance, and Sustainability of Natural Fibers in Coreless Filament Winding. Materials, 15(9), Article 9. https://doi.org/10.3390/ma15093260

Moreno Mendaza, J., Schmid, M., Scharr, S., & Scheffknecht, G. (2022). Oxy-Combustion of Solid Recovered Fuel in a Semi-Industrial CFB Reactor : on the Implications of Gas Atmosphere and Combustion Temperature. ACS Omega, 7(10), Article 10. https://doi.org/10.1021/acsomega.1c07334

Müller, T., Schick, S., Beck, J., Sprenger, G., & Takors, R. (2022). Synthetic mutualism in engineered E. coli mutant strains as functional basis for microbial production consortia. Engineering in Life Sciences, 23(1), Article 1. https://doi.org/10.1002/elsc.202100158

Neef, J., Leverenz, D., & Launay, M. A. (2022). Performance of Micropollutant Removal during Wet-Weather Conditions in Advanced Treatment Stages on a Full-Scale WWTP. Water, 14(20), Article 20. https://doi.org/10.3390/w14203281

Neumaier, M., Kranemann, S., Kazmeier, B., & Rudolph, S. (2022). Automated Piping in an Airbus A320 Landing Gear Bay Using Graph-Based Design Languages. Aerospace, 9(3), Article 3. https://doi.org/10.3390/aerospace9030140

Nguyen, M. T., Solueva, D., Spyridonos, E., & Dahy, H. (2022). Mycomerge: Fabrication of Mycelium-Based Natural Fiber Reinforced Composites on a Rattan Framework. Biomimetics, 7(2), Article 2. https://doi.org/10.3390/biomimetics7020042

Nitzlader, M., Steffen, S., Bosch, M. J., Binz, H., Kreimeyer, M., & Blandini, L. (2022). Designing Actuation Concepts for Adaptive Slabs with Integrated Fluidic Actuators Using Influence Matrices. CivilEng, 3(3), Article 3. https://doi.org/10.3390/civileng3030047

Oraby, A., Hug, D., Weickardt, I., Maerz, L., Nebel, S., Kurmann, J., Rupp, S., Tovar, G. E. M., & Zibek, S. (2022). Fermentation and recovery of cellobiose lipids using foam fractionation. Discover Chemical Engineering, 3, 3. https://doi.org/10.1007/s43938-022-00015-0

Oraby, A., Rupp, S., & Zibek, S. (2022). Techno-Economic Analysis as a Driver for Optimisation of Cellobiose Lipid Fermentation and Purification. Frontiers in Bioengineering and Biotechnology, 10(June), Article June. https://doi.org/10.3389/fbioe.2022.913351

Pajic-Lijakovic1, I., Milivojevic1, M., & Clark, A. G. (2022). Collective Cell Migration on Collagen-I Networks : The Impact of Matrix Viscoelasticity. Frontiers in Cell and Developmental Biology, 10(July), Article July. https://doi.org/10.3389/fcell.2022.901026

Park, S.-Y., & Schott, N. (2022). The Immediate and Sustained Effects of Exercise-Induced Hemodynamic Response on Executive Function During Fine Motor-Cognitive Tasks Using Functional Near-Infrared Spectroscopy. Journal of Integrative Neuroscience, 21(3), Article 3. https://doi.org/10.31083/j.jin2103098

Petillon, S., Knöller, A., Bräuer, P., Helm, D., Grözinger, T., Weser, S., Eberhardt, W., Franke, J., & Zimmermann, A. (2022). Flexural Fatigue Test : a Proposed Method to Characterize the Lifetime of Conductor Tracks on Polymeric Substrates. Journal of Manufacturing and Materials Processing, 6(2), Article 2. https://doi.org/10.3390/jmmp6020041

Pfezer, D., Karst, J., Hentschel, M., & Gießen, H. (2022). Predicting Concentrations of Mixed Sugar Solutions with a Combination of Resonant Plasmon-Enhanced SEIRA and Principal Component Analysis. Sensors, 22(15), Article 15. https://doi.org/10.3390/s22155567

Pirrone, S. R. M., Agabiti, C., Pagan, A. S., & Herdrich, G. H. (2022). A Fast Thermal 1D Model to Study Aerospace Material Response Behaviors in Uncontrolled Atmospheric Entries. Materials, 15(4), Article 4. https://doi.org/10.3390/ma15041505

Podeur, M., & Vogt, D. M. (2022). Experimental evaluation of heat transfer effect on turbocompressor performance operating with helium-neon gas mixtures. EPJ Techniques and Instrumentation, 9, 6. https://doi.org/10.1140/epjti/s40485-022-00082-1

Ramme, J., Wegert, R., Guski, V., Schmauder, S., & Möhring, H.-C. (2022). Development of a Multi-Sensor Concept for Real-Time Temperature Measurement at the Cutting Insert of a Single-Lip Deep Hole Drilling Tool. Applied Sciences, 12(14), Article 14. https://doi.org/10.3390/app12147095

Ren, J., & Kloker, M. (2022). Non-ideal gas behavior matters in hydrodynamic instability. Scientific Reports, 12, 22089. https://doi.org/10.1038/s41598-022-26629-6

Ristok, S., Flad, P., & Gießen, H. (2022). Atomic layer deposition of conformal anti-reflective coatings on complex 3D printed micro-optical systems. Optics Express, 12(5), Article 5. https://doi.org/10.1364/OME.454475

Ruddat, M. (2022). Public acceptance of wind energy : concepts, empirical drivers and some open questions. Wind Energy Science, 7(4), Article 4. https://doi.org/10.5194/wes-7-1679-2022

Sadhu, K., Haghshenas, K., Rouhani, M., & Aiello, M. (2022). Optimal joint operation of coupled transportation and power distribution urban networks. Energy Informatics, 5, 35. https://doi.org/10.1186/s42162-022-00249-w

Saemian, P., Tourian, M., AghaKouchak, A., Madani, K., & Sneeuw, N. (2022). How much water did Iran lose over the last two decades? Journal of Hydrology : Regional Studies, 41(June), Article June. https://doi.org/10.1016/j.ejrh.2022.101095

Samad, A., Florez, D. A., Chourdakis, I., & Vogt, U. (2022). Concept of Using an Unmanned Aerial Vehicle (UAV) for 3D Investigation of Air Quality in the Atmosphere-Example of Measurements Near a Roadside. Atmosphere, 13(5), Article 5. https://doi.org/10.3390/atmos13050663

Schlette, T., & Staudacher, S. (2022). Preliminary Design and Analysis of Supersonic Business Jet Engines. Aerospace, 9(9), Article 9. https://doi.org/10.3390/aerospace9090493

Schmidt-Scheele, R., Hauser, W., Scheel, O., Minn, F., & et al. (2022). Sustainability assessments of energy scenarios: citizens’ preferences for and assessments of sustainability indicators. Energy, Sustainability and Society, 12, 41. https://doi.org/10.1186/s13705-022-00366-0

Schnee, P., Choudalakis, M., Weirich, S., Khella, M. S. W., Carvalho, H., Pleiss, J., & Jeltsch, A. (2022). Mechanistic basis of the increased methylation activity of the SETD2 protein lysine methyltransferase towards a designed super-substrate peptide. Communications Chemistry, 5(1), Article 1. https://doi.org/10.1038/s42004-022-00753-w

Schneider, Y., Prabhu, V., Höss, K., Wasserböch, W., Schmauder, S., & Zhou, Z. (2022). Many-Scale Investigations of the Deformation Behavior of Polycrystalline Composites : I-Machine Learning Applied for Image Segmentation. Materials, 15(7), Article 7. https://doi.org/10.3390/ma15072486

Schneider, Y., Rapp, D. M., Yang, Y., Wasserbäch, W., & Schmauder, S. (2022). Many-Scale Investigations of Deformation Behavior of Polycrystalline Composites : II-Micro-Macro Simultaneous FE and Discrete Dislocation Dynamics Simulation. Materials, 15(8), Article 8. https://doi.org/10.3390/ma15082852

Schreiber, F., Nöldeke, J., Setzen, Š., Kropp, C., & Ley, A. (2022). The Social Quality of Design-Build : Lessons Learnt from Higher Education. Sustainability, 14(17), Article 17. https://doi.org/10.3390/su141710816

Schuk, V., Pombo Jiménez, M., & Martin, U. (2022). Technical specifications to meet the requirements of an Automatic Code Compliance Checking tool and current developments in infrastructure construction. Results in Engineering, 16, 100650. https://doi.org/10.1016/j.rineng.2022.100650

Schulte im Walde, S., & Frassinelli, D. (2022). Distributional Measures of Semantic Abstraction. Frontiers in Artificial Intelligence, 4, 796756. https://doi.org/10.3389/frai.2021.796756

Schwab, J., Weber, K., Drozella, J., Jimenez, C. E., Herkommer, A., Bremer, L., Reitzenstein, S., & Gießen, H. (2022). Coupling light emission of single-photon sources into single-mode fibers: mode matching, coupling efficiencies, and thermo-optical effects. Optics Express, 30(18), Article 18. https://doi.org/10.1364/OE.465101

Schwarz, T. M., Ott, J., Solodenko, H., Schmitz, G., & Stender, P. (2022). Nanoscale analysis of frozen honey by atom probe tomography. Scientific Reports, 12(1), Article 1. https://doi.org/10.1038/s41598-022-22717-9

Schwarz-von Raumer, H.-G., Fischer, L., & Jakstis, K. (2022). Levels to Address Human-Nature Relations in Cities Through Geo-data Processing Strategies : A Mini-Review. JoDLA – Journal of Digital Landscape Architecture, 7-2022, 7, 637–648. https://doi.org/10.14627/537724059

Seiberth, K., Thiel, A., & John, J. M. (2022). “It’s My Country I’m Playing for” : A Biographical Study on National Identity Development of Youth Elite Football Players With Migrant Background. Frontiers in Sports and Active Living, 4(July), Article July. https://doi.org/10.3389/fspor.2022.893019

Sobral da Silva, J. A., Obernauer, S., Turkel, S., Pasupathy, A. N., & Scheurer, M. (2022). Machine learning the microscopic form of nematic order in twisted double-bilayer graphene. Nature Communications, 14, 5012. https://doi.org/10.1038/s41467-023-40684-1

Sommer, S., Münster, A., Fehrentz, J.-A., & Hauber, W. (2022). Effects of Motivational Downshifts on Specific Pavlovian-Instrumental Transfer in Rats. The International Journal of Neuropsychopharmacology, 25(3), Article 3. https://doi.org/10.1093/ijnp/pyab075

Stolz, K. (2022). Why Do(n’t) We Buy Second-Hand Luxury Products? Sustainability, 14(14), Article 14. https://doi.org/10.3390/su14148656

Storchak, M., Drewle, K., Menze, C. J., Stehle, T., & Möhring, H.-C. (2022). Determination of the Tool-Chip Contact Length for the Cutting Processes. Materials, 15(9), Article 9. https://doi.org/10.3390/ma15093264

Streubel, T., Kattmann, C., Eisenmann, A., & Rudion, K. (2022). Characterization of Supraharmonic Emission from Three Different Electric Vehicle Charging Infrastructures in Time and Frequency Domain. Energies, 15(2), Article 2. https://doi.org/10.3390/en15020394

Svatoš-Ražnjević, H., Orozco, L., & Menges, A. (2022). Advanced Timber Construction Industry : a Review of 350 Multi-Storey Timber Projects from 2000–2021. Buildings, 12(4), Article 4. https://doi.org/10.3390/buildings12040404

Teye, M. T., Missah, Y. M., Ahene, E., & Frimpong, T. (2022). Evaluation of Conversational Agents : Understanding Culture, Context and Environment in Emotion Detection. IEEE Access, 10, 24976–24984. https://doi.org/10.1109/ACCESS.2022.3153787

Thomann, S., Nguyen, H. L. G., Genssler, P. R., & Amrouch, H. (2022). All-in-Memory Brain-Inspired Computing Using FeFET Synapses. Frontiers in Electronics, 3, 833260. https://doi.org/10.3389/felec.2022.833260

Thomaseth, C., & Radde, N. E. (2022). The effect of normalisation and error model choice on the distribution of the maximum likelihood estimator for a biochemical reaction. IET Systems Biology, 17(1), Article 1. https://doi.org/10.1049/syb2.12055

Toulouse, A., Drozella, J., Motzfeld, P., Fahrbach, N., Aslani, V., Thiele, S., Giessen, H., & Herkommer, A. M. (2022). Ultra-compact 3D-printed wide-angle cameras realized by multi-aperture freeform optical design. Optics Express, 30(2), Article 2. https://doi.org/10.1364/OE.439963

Toulouse, A., Thiele, S., Hirzel, K., Schmid, M., Weber, K., Zyrianova, M., Gießen, H., Herkommer, A. M., & Heymann, M. (2022). High resolution femtosecond direct laser writing with wrapped lens. Optical Materials Express, 12(9), Article 9. https://doi.org/10.1364/OME.468534

Ulmer, A., Erdemann, F., Mueller, S., Loesch, M., Wildt, S., Jensen, M. L., Gaspar, P., Zeidan, A. A., & Takors, R. (2022). Differential Amino Acid Uptake and Depletion in Mono-Cultures and Co-Cultures of Streptococcus thermophilus and Lactobacillus delbrueckii subsp. bulgaricus in a Novel Semi-Synthetic Medium. Microorganisms, 10(9), Article 9. https://doi.org/10.3390/microorganisms10091771

Unger, S., Erhard, L., Wieczorek, O., Koß, C., Riebling, J., & Heiberger, R. H. (2022). Benefits and detriments of interdisciplinarity on early career scientists’ performance. An author-level approach for U.S. physicists and psychologists. PLOS ONE, 17(6), Article 6. https://doi.org/10.1371/journal.pone.0269991

Uykur, E., Ortiz, B. R., Wilson, S. D., Dressel, M., & Tsirlin, A. A. (2022). Optical detection of the density-wave instability in the kagome metal KV3Sb5. Npj Quantum Materials, 7, 16. https://doi.org/10.1038/s41535-021-00420-8

Villota Narváez, Y. A., Garzón-Alvarado, D. A., Röhrle, O., & Ramírez-Martínez, A. M. (2022). Multi-scale mechanobiological model for skeletal muscle hypertrophy. Frontiers in Physiology, 1–4. https://doi.org/10.3389/fphys.2022.899784

Wagner, J. F., Kohl, M., & Györfi, B. (2022). Reevaluation of Algorithmic Basics for ZUPT-Based Pedestrian Navigation. IEEE Access, 10, 118419–118437. https://doi.org/10.1109/ACCESS.2022.3220629

Waldhof, M., Wochner, I., Stollenmaier, K., Parspour, N., & Schmitt, S. (2022). Design and Scaling of Exoskeleton Power Units Considering Load Cycles of Humans. Robotics, 11(5), Article 5. https://doi.org/10.3390/robotics11050107

Wang, S., Findeisen, L., Leptihn, S., Wallace, M. I., Hörning, M., & Nußberger, S. (2022). Spatiotemporal stop-and-go dynamics of the mitochondrial TOM core complex correlates with channel activity. Communications Biology, 5, 471. https://doi.org/10.1038/s42003-022-03419-4

Wasielewski, S., Rott, E., Minke, R., & Steinmetz, H. (2022). Recovery of Ammonium Sulfate Solution by Regeneration of Loaded Clinoptilolite. Nanomaterials, 12(3), Article 3. https://doi.org/10.3390/nano12030525

Weidner, D., Stoll, D., Kuthada, T., & Wagner, A. (2022). Aerodynamics of High-Speed Trains with Respect to Ground Simulation. Fluids, 7(7), Article 7. https://doi.org/10.3390/fluids7070228

Weiskopf, D. (2022). Uncertainty Visualization: Concepts, Methods, and Applications in Biological Data Visualization. Frontiers in Bioinformatics, 2, 793819. https://doi.org/10.3389/fbinf.2022.793819

Wende, M., Drozella, J., Toulouse, A., & Herkommer, A. M. (2022). Fast algorithm for the simulation of 3D-printed microoptics based on the vector wave propagation method. Optics Express, 30(22), Article 22. https://doi.org/10.1364/OE.469178

Wenz, F., Langner, J., Lutz, T., & Krämer, E. (2022). Impact of the wind field at the complex-terrain site Perdigão on the surface pressure fluctuations of a wind turbine. Wind Energy Science, 7(3), Article 3. https://doi.org/10.5194/wes-7-1321-2022

Wenzel, P. M., & Radgen, P. (2022). Multi-Criteria Comparison of Energy and Environmental Assessment Approaches for the Example of Cooling Towers. Applied System Innovation, 5(5), Article 5. https://doi.org/10.3390/asi5050089

Werum, K., Müller, E., Keck, J., Jäger, J., Horter, T., Gläser, K., Buschkamp, S., Barth, M., Eberhardt, W., & Zimmermann, A. (2022). Aerosol Jet Printing and Interconnection Technologies on Additive Manufactured Substrates. Journal of Manufacturing and Materials Processing, 6(5), Article 5. https://doi.org/10.3390/jmmp6050119

Winter, R., Valsamidou, A., Class, H., & Flemisch, B. (2022). A Study on Darcy versus Forchheimer Models for Flow through Heterogeneous Landfills including Macropores. Water, 14(4), Article 4. https://doi.org/10.3390/w14040546

Wochner, I., Nölle, L. V., Martynenko, O. V., & Schmitt, S. (2022). “Falling heads”: investigating reflexive responses to head–neck perturbations. Biomedical Engineering Online, 21, 25. https://doi.org/10.1186/s12938-022-00994-9

Yang, Q., Zhao, J., Dreyer, F., Krüger, D., & Anders, J. (2022). A portable NMR platform with arbitrary phase control and temperature compensation. Magnetic Resonance, 3(1), Article 1. https://doi.org/10.5194/mr-3-77-2022

Zamre, P., & Lutz, T. (2022). Computational-fluid-dynamics analysis of a Darrieus vertical-axis wind turbine installation on the rooftop of buildings under turbulent-inflow conditions. Wind Energy Science, 7(4), Article 4. https://doi.org/10.5194/wes-7-1661-2022

Zhang, C., Dasari, D., Widmann, M., Meinel, J., Vorobyov, V., Kapitanova, P., Nenasheva, E., Nakamura, K., Sumiya, H., Onoda, S., Isoya, J., & Wrachtrup, J. (2022). Quantum-assisted distortion-free audio signal sensing. Nature Communications, 13, 4637. https://doi.org/10.1038/s41467-022-32150-1

Aksoy Aksel, A., Gall, A., Seewald, A., Ferraguti, F., & Ehrlich, I. (2021). Midbrain dopaminergic inputs gate amygdala intercalated cell clusters by distinct and cooperative mechanisms in male mice. Neuroscience, 10, e63708. https://doi.org/10.7554/eLife.63708

Altmann, R., Mehrmann, V., & Unger, B. (2021). Port-Hamiltonian formulations of poroelastic network models. Mathematical and Computer Modelling of Dynamical Systems, 27(1), Article 1. https://doi.org/10.1080/13873954.2021.1975137

Ankenbauer, A., Nitschel, R., Teleki, A., Müller, T., Favilli, L., Blombach, B., & Takors, R. (2021). Micro-aerobic production of isobutanol with engineered Pseudomonas putida. Engineering in Life Sciences, 21(7), Article 7. https://doi.org/10.1002/elsc.202000116

Ariali, S., & Zinn, B. (2021). Adaptive Training of the Mental Rotation Ability in an Immersive Virtual Environment. International Journal of Emerging Technologies in Learning, 16(9), Article 9. https://doi.org/10.3991/ijet.v16i09.18971